- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor QD High Build Container Coating, a semi-gloss, quick-drying high build anti-corrosive primer finish for blast cleaned or mechanically cleaned mild steel. Use to paint containers/plant and equipment in a single coat application.
- Available in over 2,800+ colours in the RAL and BS range
- Ready for overcoating after 4 hours
- Application by airless spray
- Can be brushed, but will only produce approximately half the recommended film thickness
- An alkyd resin binder with zinc phosphate anti-corrosive, together with inert inorganic pigments, and thinned with xylene
- Not suitable for overcoating with 2 pack products
- Some colours may contain lead pigments
Product customisation
Don't forget to save your customization to be able to add to cartTor QD High Build Container Coating is a semi-gloss, quick-drying high build anti-corrosive primer finish for blast cleaned or mechanically cleaned mild steel, available in over 2,800 colours from the RAL and BS range. The coating can be used to paint containers/plant and equipment in a single coat application by airless spray; this paint can be brushed, but 2 coats may be necessary to achieve the dry film thickness quoted.
The quick-drying formula is touch-dry in 1 hour, ready for overcoating in 4 hours. Please note that Tor QD High Build Container Coating is not suitable for overcoating with 2 pack products.
Features & Benefits
- Anti-corrosive primer finish
- For use on blast cleaned or mechanically cleaned mild steel
- Can be used to paint containers/plant and equipment
- Quick-drying, semi-gloss finish
- One-coat application by airless spray
- Can be brushed, but will only produce approximately half the recommended film thickness
- Not suitable for overcoating with 2 pack products
- Some colours may contain lead pigments
Product Information
An alkyd resin binder with zinc phosphate anti-corrosive, together with inert inorganic pigments, and thinned with xylene.
Product reference | AK736 |
Volume solids | Approx 44% |
Typical thickness | 75-100 microns dft from 170-230 microns wet |
Theoretical coverage | 4.4-5.9 square metres per litre |
Practical coverage | Reduce theoretical coverage by up to 20% |
VOC content | EU limit value for this product (cat A/i): 500 g/l. This product contains max 500 g/l VOC |
Surface Preparation
Steel:
Grit blast to BS4232, 2nd Quality (SA 2.5 Swedish Standard) with a blast profile of 50-75 microns to remove all scale, rust, old paint and contaminants.
Minimum:
Chip scrape and mechanically wire brush to Swedish Standard ST2 for mechanically cleaned steel.
Application Details
Mix ratio | N/A |
Method of application | Airless spray (tip size 0.019”-0.021” and 2000-2400 psi atomising pressure). Can be brushed but two coats may be necessary to achieve the dry film thickness quoted. |
Cleaner | Tor TH19 |
Pot Life | N/A |
Drying Times
Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
---|---|---|---|---|
Minimum | Maximum | |||
20°C | 1 hour | 4 hours | 4 hours | Indefinite |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in a safe place out of the reach of children
Flash point
- Within range 23°C-32°C
Shelf life
- 1 year in unopened containers
Limitations
Not suitable for overcoating with 2 pack products.
Brush application will only produce approximately half the recommended film thickness.
Some colours may contain lead pigments.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Data sheet
- Manufacturer
- Tor Coating
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, Spray
- Sheen
- Semi-gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Parts
- 1
- Base Type
- Solvent
- Solvent
- An alkyd resin binder with zinc phosphate anti-corrosive, together with inert inorganic pigments, and thinned with xylene.
- Mixing Ratio
- -
- Suitable Substrates
- Blast cleaned or mechanically cleaned mild steel.
- Key Features
- Quick-drying high build anti-corrosive primer finish, painting containers/plant and equipment in a single coat application
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 1 hour
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- 4 hours
- Pot Life (at 20°C)
- -
- Coverage
- 4.4-5.9 square metres per litre
- Recommended Thinner/Cleaner
- Tor TH19
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- Not suitable for overcoating with 2 pack products.
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- Approx 44%
- Heat Resistance (up-to)
- -
- VOC
- This product contains max 500 g/l VOC
- Shelf Life (from date of manufacture)
- 1 year in unopened containers
- UN Number
- UN 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Primer & Topcoat
- Product Range
- Tor Industrial
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor QD High Build Container Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor QD Thinner
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...