- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Farm Oxide Semi-Gloss is a general purpose finish with low toxicity, for use on and around farms and in farm buildings on a variety of substrates, including bare wood, steel and masonry.
- Modified alkyd resin binder pigmented with low toxicity pigments and extenders, thinned with low aromatic white spirit. Contains no lead pigments
- Surface preparation required - refer further below for more details
- For brush or roller application
- Can be applied by conventional spray if thinned with Tor TH10
- Refer below for application details
- Good coverage - up to 12 square metres per litre
- Touch dry in 4-5 hours - overcoat after 16 hours
Tor Farm Oxide Semi-Gloss, a general purpose finish with low toxicity, for use on and around farms and in farm buildings on a variety of substrates, including bare wood, steel and masonry.
The semi-gloss finish can be applied by brush or roller, or can be thinned for use with a conventional sprayer.
Refer below for details on surface preparation and application.
Features & Benefits
- Semi-gloss general purpose finish
- Ideal for farm buildings
- For use on a variety of bare substrates, including:
- Wood
- Masonry
- Steel
- For brush or roller application
- Can be applied by conventional spray if thinned with Tor TH10
- Refer below for application details
- Low-toxicity
- Ensure good ventilation during application and drying
- Good coverage - up to 12 square metres per litre
- Touch dry in 4-5 hours - overcoat after 16 hours
Product Information
Modified alkyd resin binder pigmented with low toxicity pigments and extenders, thinned with low aromatic white spirit. Contains no lead pigments.
Product reference | AK789 |
Volume solids | 54% |
Typical thickness | 45 microns dft form 83 microns wet |
Theoretical coverage | 12 square metres per litre |
Practical coverage | 10 square metres per litre |
VOC content | EU limit value for this product (cat A/d): 300 g/l. This product contains max 300 g/l VOC |
Surface Preparation
Bare Wood:
Thoroughly sand, wipe clean with Tor TH10 and prime with AK610 Tor Aluminium Wood Primer followed when dry by one coat of Farm Oxide.
Bare Steel:
Chip, scrape and wire brush to ST2 Swedish Standard and prime with Farm Oxide or AK618 Tor QD Red Oxide Primer followed when dry by one coat of Farm Oxide.
Bare Masonry:
Should be dry and free from any loose and flaking or powdery material, oil or grease. Stabilise by applying one coat of AK602 Tor SP Stabilising Sealer followed when dry by one coat of Farm Oxide.
Application Details
Mix ratio | N/A |
Method of application | Brush or short pile roller. By reducing with 15-20% Tor TH5 or TH10 can also be applied by conventional spray. |
Cleaner | Tor TH5 for cleaning equipment |
Pot Life | N/A |
Drying Times
Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
---|---|---|---|---|
Minimum | Maximum | |||
20°C | 4 -5 hours | 16 hours | 16 hours | 28 days |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in a safe place out of the reach of children
Flash point
- Above 32°C
Shelf life
- 2 years in unopened containers
Limitations
Ensure good ventilation during application and drying.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Data sheet
- Manufacturer
- Tor Coatings
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Wood, Steel, Masonry
- Application Method
- Brush, Roller
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L, 5L, 20L
- Parts
- 1
- Solvent
- Modified alkyd resin binder pigmented with low toxicity pigments and extenders, thinned with low aromatic white spirit contains no lead pigments.
- Mixing Ratio
- -
- Suitable Substrates
- Bare wood, steel, masonry
- Key Features
- Semi-gloss finish for farm buildings
- Touch Dry (at 20°C)
- 4 -5 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- 16 hours
- Pot Life (at 20°C)
- -
- Coverage
- 12 square metres per litre
- Recommended Thinner/Cleaner
- Tor TH5 or TH10
- Unit Contents
- -
- Compatible Primers
- AK610 Tor Aluminium Wood Primer, AK602 Tor SP Stabilising Sealer
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- 54%
- Heat Resistance (up-to)
- -
- VOC
- This product contains max 300 g/l VOC
- Shelf Life (from date of manufacture)
- 2 years in unopened containers
- UN Number
- UN1263
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Masonry
- Suitable For Use On
- Wood
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Topcoat
- Product Range
- Tor Industrial
- Colour Family
- Red
- Colour Family
- Grey
- Colour Family
- Green
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Farm Oxide Semi-Gloss is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor General Purpose Thinner
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...