- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
For internal and external use on a wide range of substrates and surfaces, suitable for overcoating with many topcoats.
- Low odour, water-based single pack primer
- Based on a special acrylic emulsion pigmented with inorganic pigments and extenders
- Apply by brush, roller or sprayer
- Touch dry after 2 hours - leave for 16 hours before overcoating
- Applicable substrates include:
- Plaster, Concrete and Ceramic tile
- Wood, Fibreglass and Steel
- Galvanising, Aluminium and Copper
- Rigid plastics - not suitable for use with flexible plastics
Description
Aqualife SP Multi-Surface Primer for use over many different substrate types, such as:
- Existing painted surfaces
- Plaster
- Concrete
- Ceramic tile
- Wood
- Fibreglass
- Steel
- Galvanising
- Aluminium
- Copper
- Rigid plastics
The low-odour primer can be used internally and externally, applied by brush, roller or sprayer, and overcoated with a wide range of topcoats.
Features & Benefits
- Multi-purpose primer
- Single pack
- Water-based
- Low odour
- Can be used on a wide range of internal and external substrates and surfaces
- Apply by brush, roller or sprayer
- Touch dry after 2 hours
- Leave for 16 hours before overcoating
- Not suitable for use with flexible plastics, or for tiles exposed to prolonged periods under standing water or immersion conditions.
Product Information
Single pack low odour water based primer based on a special acrylic emulsion pigmented with inorganic pigments and extenders.
| Product reference | EM367 |
| Volume solids | 40% |
| Typical thickness | 40 microns dft from 100 wet |
| Theoretical coverage | 10 square metres per litre |
| Practical coverage | Reduce theoretical coverage by up to 20% |
| VOC content | 25 gms/litre |
Surface Preparation
Steel - Remove any loosely adhering rust or scale and wire brush back to a sound substrate.
Ensure new metal surfaces (eg. galvanising, aluminium, copper) are thoroughly degreased.
Hard Glossy painted surfaces should be lightly abraded and washed down.
Ensure all surfaces are clean and dry and free of surface contamination such as oil or grease.
Not suitable for use on flexible plastics.
Application Details
| Mix ratio | N/A |
| Method of application | Brush, roller or spray |
| Thinner | Water (when required) |
| Cleaner | Water for cleaning equipment |
| Pot Life | N/A |
Drying Times
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 2 hours | 4-6 hours | 16 hours | Unlimited |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage & Handling
| Storage | In a safe place out of the reach of children. Protect from frost. |
| Flash point | Non flammable |
Limitations
The liquid paint and the freshly applied paint film must be protected from frost. Do not apply if the temperature is below 5oC or the relative humidity exceeds 85%.
Drying times will be extended in cold weather in unheated buildings.
Not suitable for tiles exposed to prolonged periods under standing water or immersion conditions.
Product Details
4118-983346
Data sheet
- Manufacturer
- Tor
- Water / Solvent Based
- Water
- For Use On
- Plaster, Concrete, Ceramic tiles, Wood, Fibre-Glass, Steel, Galvanising, Aluminium, Copper, Plastics
- Application Method
- Brush, roller, spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Parts
- 1
- Base Type
- Water-based
- Solvent
- Based on a special acrylic emulsion pigmented with inorganic pigments and extenders.
- Mixing Ratio
- -
- Suitable Substrates
- Plaster, Concrete, Ceramic tile, Wood, Fibreglass, Steel, Galvanising, Aluminium, Copper, Rigid plastics
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 2 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- 4-6 hours
- Pot Life (at 20°C)
- -
- Coverage
- 10 square metres per litre
- Recommended Thinner/Cleaner
- Water
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- 40%
- Heat Resistance (up-to)
- -
- VOC
- 25 gms/litre
- Shelf Life (Once Opened)
- -
- UN Number
- -
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Ceramic Tiles
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Fibreglass
- Suitable For Use On
- Plastics
- Suitable For Use On
- Wood
- Suitable For Use On
- Plaster
- Suitable For Use On
- Copper
- Suitable For Use On
- Galvanising
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Roller
- Product Usage Type
- Primer
- Product Range
- Tor Graffiti & Hygiene
- Product Range
- Aqualife
- Brand
- Tor Coatings
- Colour Family
- White
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Aqualife SP Multi-Surface Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
