- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Unicover TP Coloured, a 2-pack high performance anti-graffiti, anti-vandal finish coat for the Torlife TP Coloured System, available in over 4,400+ colours from RAL, RAL Design, BS, NCS & the new NCS 2050 colours.
- For external surfaces on nearly all building types
- Use in communal areas and industrial environments
Product customisation
Don't forget to save your customization to be able to add to cartTor Unicover TP Coloured Finish is a 2-pack high performance anti-graffiti coating for use as the finish coat of the Torlife TP Coloured System, available with a gloss or stain finish in 4,400+ colours from RAL, RAL Design, BS, NCS & the new NCS 2050 colours.
The coating provides a long life, extremely durable and easily cleaned permanent anti-graffiti system for external surfaces on nearly all building types and can also be used in industrial applications, providing outstanding resistance to weathering, high abrasion, solvent and chemical resistance and excellent colour fastness.
The system provides an extremely hardwearing decorative finish combined with a Class 0 fire rating when applied to new, bare or stripped surfaces. Graffiti can be removed from the painted surfaces by using the Tor range of Graffiti removers. This also allows the fire rating of the coated surfaces to be maintained throughout the life of the system.
Features & Benefits
- High performance permanent anti-graffiti coating
- Non-sacrificial anti-graffiti finish
- Finish coat for Torlife TP Coloured Systems
- 4,400+ colours from RAL, RAL Design, BS, NCS & the new NCS 2050 colours
- Provides a Class 0 fire rating when applied to new, bare or stripped surfaces.
- Class “O” fire rated only when applied directly on to a non-combustible substrate.
- Independently tested by Warrington Fire
- Excellent durability and UV colour stability
- Easily cleaned - excellent graffiti removal properties
- Do not attempt to remove graffiti until PU801/PU803 has cured for at least 7 days.
- For external use, with an extended redecoration cycle
- Can also be used in industrial applications, providing out standing resistance to:
- Weathering
- High abrasion
- Solvents
- Chemicals
- Excellent colour fastness
- Refer below for more product information, preparation and application instructions
What does the system include?
1st Coat -
Torlife™ ST Primer (EP146), a two-pack adhesion promoting primer.
2nd & 3rd Coat -
Torlife™ TP (PU801/PU803), a two pack polyurethane, solvent-based anti-graffiti finish.
Where can it be used?
The Unicover TP system is suitable for many external building substrates on nearly all building types, including:
- New bare or previously painted:
- Not suitable for use on soft woods
- Finish coats are applied direct to UPVC - No primer required
- Metals
- Brick
- Masonry
- Concrete
- Render
- Timber
- UPVC
NB: Previously painted Pliolite or other non convertible coatings need to be primed with Torlife ST primer (EP146)
Product Information
A two pack pigmented acrylic polyurethane containing aromatic hydrocarbon and glycol ester solvents.
Gloss | Satin | |
---|---|---|
Product reference | PU801 | PU803 |
Volume solids | 50% | 42% |
Typical thickness | 50 microns dft from 100 wft | 42 microns dft from 100 wft |
Theoretical coverage | 10 square metres per litre | 10 square metres per litre |
Practical coverage | Reduce theoretical coverage by up to 20% | Reduce theoretical coverage by up to 20% |
Appearance | Gloss | Satin |
VOC content | EU limit value for this product (cat A/j): 500 g/l . This product contains max 500 g/l VOC | EU limit value for this product (cat A/j): 140 g/l . This product contains max 140 g/l VOC |
Surface Preparation
Communal Areas:
To be applied over surfaces primed with Torlife ST Primer or Aqualife WSE Primer.
Industrial applications:
Refer to Technical Team (0113 2455450)
Application Details
Mix ratio | 6:1 by Volume. Base and activator supplied in correct proportions. Add all activator to base container. Mix thoroughly for at least 5 mins until product is smooth and even. Allow to rest 5 mins before using. DO NOT MIX PART UNITS. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration. | Base and activator supplied in correct proportions. Add all activator to base container. Mix thoroughly for at least 5 mins until product is smooth and even. Allow to rest 5 mins before using. DO NOT MIX PART UNITS. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration. |
Method of application | For communal areas, apply 2 coats by short pile mohair roller (small areas can be brushed). For industrial applications refer to our technical team on 0113 2455450. | |
Thinner | Tor TH99 (when required) | |
Cleaner | Tor TH99 for cleaning equipment | |
Pot Life | Approximately 8 hours |
Drying Times
Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
---|---|---|---|---|
Minimum | Maximum | |||
20°C | 1 hour | 8 hours | 8 hours | 48 hours |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in a safe place out of the reach of children
Flash point
- Above 32°C
Shelf life
- 2 years in unopened containers
Limitations
Do not use in confined spaces without sufficient mechanical ventilation to comply with Occupational Exposure Limits.
Do not attempt to remove graffiti until PU801/PU803 has cured for at least 7 days.
Class “O” fire rated only when applied directly on to a non-combustible substrate.
Some colours within the range may contain lead based pigments.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Tor Coatings
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Surfaces primed with Tor Torlife ST Primer, Surfaces primed with Tor Aqualife TP WSE Primer
- Application Method
- Brush
Roller - Sheen
- Gloss
Satin - Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Parts
- 2
- Base Type
- Polyurethane
- Interior/Exterior Use
- Exterior Use
- Solvent
- Pigmented acrylic polyurethane containing aromatic hydrocarbon and glycol ester solvents.
- Mixing Ratio
- Gloss - 6:1; Satin: supplied in correct proportions.
- Key Features
- Anti-graffiti with class 0 flame retardant finish for almost all building types
- Touch Dry (at 20°C)
- 1 hour
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 8 hours
- Fully Cured (at 20°C)
- 8 hours
- Pot Life (at 20°C)
- Approximately 8 hours
- Coverage
- 10 square metres per litre
- Recommended Thinner/Cleaner
- Tor TH99
- Unit Contents
- -
- Compatible Primers
- Torlife™ ST Primer (EP146)
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Heat Resistance (up-to)
- -
- VOC
- Gloss - max 500 g/l VOC; Satin - max 140 g/l VOC
- UN Number
- UN1866, UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Compatible Paints
- Finish
- Gloss
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Permanent / Semi-Permanent
- Permanent
- Product Usage Type
- Topcoat
- Product Range
- Unicover
- Product Range
- Tor Industrial
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Unicover TP Coloured Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor Aqualife SP Multi-Surface Primer
For internal and external use on a wide range of substrates and surfaces, suitable for overcoating with many topcoats. Low odour, water-based single pack primer Based on a special acrylic emulsion pigmented with inorganic pigments and extenders Apply by brush, roller or sprayer Touch dry after 2 hours - leave for 16 hours before...
Tor Torlife ST Primer
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Metal Paints page for more Primers and Undercoats.