- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Tormastic Colour Coating, a gloss finish in over 1,500+ colours from RAL, BS, NCS & NCS 2050 for wood, metal and cementitious substrates.
- Ideal for farm and industrial building renovations
- Good colour stability
- Economical - most colours cover with one coat
- Apply over conventional primers
- Good coverage up to 12 square metres per litre
- Apply by brush, roller or sprayer
- An inorganic and/or organic pigmented resin based paint, thinned with low aromatic white spirits.
Product customisation
Don't forget to save your customization to be able to add to cartTor Tormastic Colour Coating is a gloss finish for wood, metal and cementitious substrates, normally applying over conventional primers and covering in one coat.
The finish is ideal for farm buildings and industrial renovations, available in more than 1,500+ colours from RAL, BS, NCS & NCS 2050, making a match to existing colour schemes and branding easier.
Features & Benefits
- Gloss finish for wood, metal and cement
- Available in 1,500+ colours from RAL, BS, NCS & NCS 2050
- Economical - most colours require just one coat
- Match existing colour schemes, branding, etc
- Good colour stability
- Ideal for use on farm buildings and industrial areas, especially for renovations
- Most colours cover in a single coat
- Some colours may require an undercoat or second topcoat.
- Apply over conventional primers
- Patch prime and use 2 coats for previously painted surfaces
- Good coverage up to 12 square metres per litre
- Apply by brush, roller or sprayer
- Maximum heat resistance - 125°C.
Product Information
An inorganic and/or organic pigmented resin based paint, good colour stability, thinned with low aromatic white spirits.
Product reference | AK776 |
Volume solids | 48% +/- 3% depending on colour |
Typical thickness | 37-42 microns dft from 83 microns wet |
Theoretical coverage | 12 square metres per litre at 40 microns dft |
Practical coverage | Reduce above by up to 20% depending on substrates |
VOC content | EU limit value for this product (cat A/d): 300 g/l. This product contains max 300 g/l VOC |
Surface Preparation
Apply to suitably primed surfaces.
Some colours may require an undercoat or second topcoat.
Previously painted surfaces – patch prime where necessary. Apply one or two full coats of Tormastic over prepared surface.
Application Details
Mix ratio | N/A |
Method of application | Brush, suitable roller or spray |
Cleaner | Tor TH10 |
Pot Life | N/A |
Drying Times
Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
---|---|---|---|---|
Minimum | Maximum | |||
20°C | 4 hours | 16 hours | 16 hours | 7 days |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in cool well ventilated conditions
Flash point
- Above 32°C
Shelf life
- 2 years in unopened containers
Limitations
May sag if applied too liberally.
Maximum heat resistance 125°C.
Drying time may be extended at low temperatures.
Please check Safety Data Sheet as some colours contain lead based pigments.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Data sheet
- Manufacturer
- Tor Coatings
- Water / Solvent Based
- Solvent
- For Use On
- Wood, Metal, Cementitious Substrates
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 5L
- Parts
- 1
- Base Type
- Resin
- Solvent
- An inorganic and/or organic pigmented resin based paint, good colour stability, thinned with low aromatic white spirits.
- Mixing Ratio
- -
- Suitable Substrates
- Wood, metal and cementitious substrates
- Key Features
- One-coat gloss finish with over 350 colours
- Touch Dry (at 20°C)
- 4 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- 16 hours
- Pot Life (at 20°C)
- -
- Coverage
- 12 square metres per litre at 40 microns dft
- Recommended Thinner/Cleaner
- Tor TH10
- Unit Contents
- -
- Compatible Primers
- Conventional primers
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- 48% +/- 3% depending on colour
- Heat Resistance (up-to)
- 125°C
- VOC
- Max 300 g/l VOC
- Shelf Life (from date of manufacture)
- 2 years in unopened containers
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Suitable For Use On
- Wood
- Suitable For Use On
- Cementitious Substrates
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Tor Industrial
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Tormastic Colour Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor General Purpose Thinner
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...