- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Tractor Enamel, available in over 1,500 colours, is ideal for farm machinery, tractors, vehicles, tools and implements. The general purpose gloss enamel has a high flash point and applies to bare steel and previously-painted surfaces by brush, roller or conventional sprayer.
- 1,500+ colours from RAL, BS, NCS & NCS 2050
- Good coverage - up to 12.5 square metre per litre
- Touch dry in 2-4 hours
- Modified alkyd resin binder pigmented with inorganic/organic pigments and thinned with white spirit
- Certain colours contain lead
- Do not apply to surfaces likely to be chewed by animals
Product customisation
Don't forget to save your customization to be able to add to cartTor Tractor Enamel, a general purpose, gloss enamel with high flash for use on tractors and farm implements, available in over 1,500+ colours from RAL, BS, NCS & NCS 2050. The metal paint applies by brush, roller and conventional spray (after reducing) - please refer below to for information on applying to bare steel and previously-painted surfaces.
Features & Benefits
- A high flash product (37°C)
- General purpose gloss enamel
- 1,500+ colours from RAL, BS, NCS & NCS 2050
- Ideal for use around farms on machinery, vehicles (tractors), tools and implements
- Use on bare steel and previously-painted surfaces
- Good coverage - up to 12.5 square metre per litre
- Apply with a brush or short-pile roller
- Reduce with Tor TH10 for conventional sprayers
- Touch dry in 2-4 hours
- Allow a minimum of 16 hours before overcoating
- Please note:
- Ensure good ventilation during application and drying
- Certain colours may require two coats to ensure satisfactory opacity
- Certain colours contain lead
- Do not apply to surfaces likely to be chewed by animals
Product Information
Modified alkyd resin binder pigmented with inorganic/organic pigments and thinned with white spirit. Certain colours contain lead.
Product reference | AK485 |
Volume solids | 47-52% (depending on colour) |
Typical thickness | 40 microns dft from 80 microns wet |
Theoretical coverage | 12.5 square metre per litre |
Practical coverage | 10 square metres per litre |
VOC content | 450g/L |
Surface Preparation
Bare Steel -
Chip, scrap and wire brush to ST2 Swedish Standard and prime with Farm Oxide thinned with up to 15% Tor TH10 followed when dry by one or two coats of Tor Tractor Enamel.
Previously Painted -
All previously painted areas must be checked for adhesion of existing coatings. If unsound, remove and treat as bare. If sound one or two coats of Tor Tractor Enamel as required.
Application Details
Mix ratio | N/A |
Method of application | Brush or short pile roller. By reducing with 15-20% Tor TH10 can be also applied by conventional spray |
Thinner | Tor TH10 |
Cleaner | Tor TH10 for cleaning equipment |
Pot Life | N/A |
Drying Times
Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
---|---|---|---|---|
Minimum | Maximum | |||
20°C | 2-4 hours | 16 hours | 16 hours | 28 days |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in a safe place out of the reach of children
Flash point
- 37°C
Shelf life
- 2 years in unopened containers
Limitations
Ensure good ventilation during application and drying.
Certain colours may require two coats to ensure satisfactory opacity.
Certain colours contain lead.
Do not apply to surfaces likely to be chewed by animals.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Data sheet
- Manufacturer
- Tor Coatings
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, Roller
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L
- Parts
- 1
- Base Type
- Solvent
- Solvent
- Modified alkyd resin binder pigmented with inorganic/organic pigments and thinned with white spirit. Certain colours contain lead.
- Mixing Ratio
- -
- Suitable Substrates
- Metal, bare steel
- Key Features
- 350+ colours from RAL & BS; High flash general purpose metal paint, ideal for tractors and farm equipment
- Application
- Brush, Roller
- Touch Dry (at 20°C)
- 2-4 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- 16 hours
- Pot Life (at 20°C)
- -
- Coverage
- 12.5 square metre per litre
- Recommended Thinner/Cleaner
- Tor TH10
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- 47-52% (depending on colour)
- Heat Resistance (up-to)
- -
- VOC
- 450g/L
- Shelf Life (from date of manufacture)
- 2 years in unopened containers
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Topcoat
- Product Range
- Tor Industrial
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Anthracite Grey
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Tractor Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor General Purpose Thinner
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...