Follow us on:

Protecta Service Coating FR-1 | Fire Retardant Paints
Protecta Service Coating FR-1 | Fire Retardant Paints

Protecta Service Coating FR-1

PRO226
PRO4232

Water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money.

  • Can be used in combination with Protecta FR Board as a coatback on services to achieve a higher fire classification
  • Reaches EI 60 and EI 90 fire classifications, tested to EN-1366 part 3 - see below for fire classifaction data
  • Near zero VOC - resists bacteria and fungal growth - halogen free
  • Robust and designed to last, up to 12 years
  • Cost effective and time-saving - applies in one-coat - no topcoat needed
  • Not for use on bituminous substrates or substrates that can exude certain oils and plasticizers or solvents - not recommended for use in constant humid areas
  • Dry in 90 minutes (at ~22°C) - see below for application details and test data
Colour
Size
Finish
£47.35(incl. VAT)
£39.46(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Protecta Service Coating FR-1 is a water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money.



Features & Benefits


  • Excellent fire resistance making combustible cables fireproof
  • Intumescent coating expands when exposed to fire, preventing spread of smoke and flames
  • Can be used in combination with Protecta FR Board as a coatback on services to achieve a higher fire classification
  • Reaches EI 60 and EI 90 fire classifications, tested to EN-1366 part 3 - see below for fire classifaction data
  • Non-toxic and emission free with near zero VOC and best possible emission classifications makes the paint perfect for anyone not wanting to breathe toxic chemicals and especially people suffering from asthma, allergies or any other breathing related diseases
  • Durable, robust and designed to last, can be cleaned with a damp cloth without the risk of washing off the paint
  • Excellent coverage by brush or spray. The paint can be applied in one-coat which is cost effective, saving paint and application time. No topcoat needed
  • Halogen free with added preservatives that resist bacteria and fungal growth providing extra protection to health in addition to the non-harmful emissions
  • The paint is not intended for application on bituminous substrates or substrates that can exude certain oils and plasticizers or solvents, and is not recommended for use in constant humid areas
  • The paint’s durability is expected to be at least 12 years making it a cost effective option when compared with normal paints with limited durability
  • Dry in 90 minutes (at ~22°C)
  • See below for application details and test data



Ordering References


Reference Product Name Size Colour
P226 Protecta Service Coating FR-1 3lt White
P226 Protecta Service Coating FR-1 3lt Classic White
P226 Protecta Service Coating FR-1 3lt Egg White
P226 Protecta Service Coating FR-1 3lt Cotton
P226 Protecta Service Coating FR-1 3lt Cream
P226 Protecta Service Coating FR-1 3lt Seashell
P226 Protecta Service Coating FR-1 3lt Beige
P226 Protecta Service Coating FR-1 3lt Coffee Cream
P226 Protecta Service Coating FR-1 3lt Magnolia
P226 Protecta Service Coating FR-1 3lt Warm Grey
P226 Protecta Service Coating FR-1 3lt Steel Smoke



Technical Data


Type Acrylic based intumescent paint
Cure system Water loss
Health & safety Non-hazardous
Specific gravity 1.40g/cm3
VOC 0.0001 g/L
Touch dry 1 hour at ~22°C & 50% RH*
Hard dry 1.5 hour at ~22°C & 50% RH*
Application conditions Minimum +10°C and humidity lower than 80%
Temperature range -30°C to +80°C (when hardened)
Durability Type Z2 internal conditions with humidity lower than 85% R.H, excluding temperatures below 0°C
Shelf life Up to 6 months when stored in cool dry well ventilated areas between +20 and +25°C
Work life 12 years

* Drying times are dependent on temperature, RH & film thickness.



Application Instructions


Preparation

Before painting ensure the surface to be painted is clean, dry and free from grease, dirt, dust, and other contaminants.

Paint

Stir thoroughly before use to ensure the paint is completely mixed. Apply to a small area of substrate to check compatibility before full application is attempted. The paint can be spray applied in one coat using, for example, the Graco X-Force Spray Gun, with a tip size of 17-21 thou. The paint can also be brush applied and can be diluted with up to 10% water for easier application. Do not apply in very damp or humid conditions or extremes of temperature. For fire classifications, please see the loadings in the table below.

Clean Up

Follow the manufacturer’s instructions for cleaning out the spray gun after it has been used to spray a water based paint. Remove excess paint from the brush on the rim of the paint pot and then wash the brush with water. Store in a cool dry well ventilated area between +20 and +25°C. Don’t waste unwanted paint.



Fire Performance


Seal Description Coatback Service Fire Classification
Single Protecta FR Board 50mm 2-S in flexible and rigid walls comprise gypsum, masonry, aerated concrete or concrete ≥ 100 mm thick. Flexible walls with apertures framed and lined. 300μ WFT @ 150mm length both sides ≤ 80mm single or bundled cables on cable ladders and perforated steel trays EI 60
Cables ≤ Ø21mm in tied bundles ≤ Ø100mm EI 90

WFT = wet film thickness = usage in litres per m² = 0.3 litre per m² (1000microns/µ is 1mm).

The service installations were tested according to EN-1366 part 3. For details, see Protecta FR Board Installation Instructions.



Emission Data (Indoor Air Quality)


Compound Emission rate after 3 days Emission rate after 4 weeks
TVOC 0.22 mg/m³ < 0.005 mg/m³
TSVOC < 0.005 mg/m³ < 0.005 mg/m³
R-value (dimensionless) 0.38 0
Sum w/o NIK < 0.005 mg/m³ < 0.005 mg/m³
Formaldehyde < 0.003 mg/m³ < 0.003 mg/m³
Total carcinogens < 0.001 mg/m³ < 0.001 mg/m³
Acetaldehyde 0.003 mg/m³ < 0.003 mg/m³
Propionaldehyde < 0.003 mg/m³ < 0.003 mg/m³
Butyraldehyde < 0.003 mg/m³ < 0.003 mg/m³

 

Regulation or Protocol Conclusion
French VOC Regulation A+
French CMR components Pass
AgBB Pass
Belgian Regulation Pass
Indoor Air Comfort® Pass
Indoor Air Comfort GOLD® Pass
EN 717-1§ E1
BREEAM International Compliant
BREEAM-NOR Pass
LEED v4 (outside U.S.) Compliant



Emission Data (indoor air quality)


Compound Emission rate after 4 weeks
TVOC 0.20 mg/m²h
Formaldehyde n.d.
Ammonia n.d.
Carcinogenic n.d.
n.d. means not detected

 

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions . We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
4232-555553

Data sheet

Finish
Matt
Product Usage Type
Intumescent Coating
Colour Family
White
Fire Rating
60 Minutes
Fire Rating
90 Minutes
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Protecta Service Coating FR-1 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT