Follow us on:

Instarmac UltraCrete Tough Patch Rapid
Instarmac UltraCrete Tough Patch Rapid
Instarmac UltraCrete Tough Patch Rapid
Instarmac UltraCrete Tough Patch Rapid

Instarmac UltraCrete Tough Patch 6mm

TOUGHPATCH
INS4238

An instant solution for utility apparatus installations and reinstatements, permanent repairs and patching in footpaths, and temporary pothole repairs in carriageways.

  • Certified for use through the Product Assessment Scheme (PAS)
  • First time permanent, emergency and temporary repairs
  • Rapid curing, instantly trafficable
  • High deformation performance and rut resistance
  • Can be cored after 24 hours
  • Use in all weather
  • Easy to use and apply
  • 6mm Grade - suitable for defect repairs, potholes, trench reinstatement, utility installations, patching in car parks, driveways and other local repairs

Please note: 10mm Grade is also available for permanent repairs in type 3 & 4 roads and temporary/emergency repairs in higher category roads on a Made To Order basis - please contact us on 0113 2455450 (option 1) or send a message to [email protected] for details.

Colour
Size
Pallet Quantity
£1583.30(incl. VAT)
£1319.42(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Instarmac UltraCrete Tough Patch Rapid

Tough Patch® 6mm grade is a rapid curing, permanent cold-lay surfacing material (PCSM) suitable for defect repairs, potholes, trench reinstatement, utility installations, patching in car parks, driveways and other local repairs. Ideally suited for use on bituminous /asphalt and cementitious paving and road substrates.

  • Certified for use through the Product Assessment Scheme (PAS)
  • First time permanent, emergency and temporary repairs in footpaths, foot ways and cycle tracks
  • Minimal traffic management, labour and waste
  • Rapid curing
  • Instantly trafficable
  • High deformation and rut resistance
  • Can be cored after 24
  • Use in all weather
  • Inovative reactive binder
  • Skid and rut resistant
  • Contains renewable binder materials

Tough Patch 6mm Grade is a rapid curing, permanent cold-lay surfacing material (PCSM) suitable for defect repairs, potholes, trench reinstatement, utility installations, patching in car parks, driveways and other local repairs. Ideally suited for use on bituminous / asphalt and cementitious paving and road substrates.

It uses an innovative reactive binder that rapidly cures a first time permanent repair, this binder is based on renewable materials and contains no solvents. The rapid curing reaction is activated by sprinkling water over the product before compacting. Once compacted the installation can be instantly opened to traffic and is able to be cored for assessment after 24 hours. The product can be used in all weather conditions. Tough Patch 6mm can also be used for emergency or temporary repairs where a rapid response is required to prevent risk to operatives, pedestrians, cyclists and motorists.

Full preparation and application instructions can be found on the product data sheet.

Product Details
4238-781374

Data sheet

Manufacturer
Instarmac
Interior / Exterior Use
Exterior Use
For Use On
Bituminous Surfaces, Cement, Asphalt
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Product Certifications
Certified for use through the Product Assessment Scheme (PAS)
Pack Size
25KG Bag, 25KG Bucket
Key Features
Rapid curing - Instantly trafficable - High deformation and rut resistance - Can be cored after 24 hours - Use in all weather - Innovative reactive binder - Skid and rut resistant
Fully Cured (at 20°C)
Can be cored within 24 hours
Coverage
1 unit covers 1sqm at 12mm to 15mm depth compacted depending on the surface regularity of the reinstatements.
Max. Application Temperature
40°C
Min. Application Temperature
-5°C
Shelf Life (from date of manufacture)
Up to 6 months from date of manufacture in sealed units stored in the above conditions. Once opened, all material should be used up.
Size
25KG Bag
UN Number
N/A
Suitable For Use On
Asphalt
Application Method
Tamper
Application Method
Pour
Product Usage Type
Filler
Product Range
Ultracrete
Colour Family
Black
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Instarmac UltraCrete Tough Patch 6mm is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT