- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Axalta ViterLac 046 One Coat Finish, a one coat, semi-gloss, anti-corrosive primer/finish for steelwork. Fast drying single coat system for blast cleaned steelwork for in-shop application.
- Provides a colourful semi-gloss finish from one fast drying application in-shop
- Available in Standard Black (20L Only), Graphite Grey (20L only - minimum order quantity applies) and 350+ RAL and BS shades
- Designed for airless spray application
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Axalta ViterLac 046 One Coat Finish, a one coat, semi-gloss, anti-corrosive primer/finish for steelwork. Fast drying single coat system for blast cleaned steelwork for in-shop application. Conveniently provides a colourful semi-gloss finish from one fast drying application. This product has been designed use as an ideal anti-corrosive primer/finish for structural steelwork with a wide range of colours avaliable.
Approvals/Certification - Please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected]
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- For use as an anti-corrosive primer/finish for structural steelwork.
- Designed for airless spray application.
- Wide colour range of over 350+ RAL and BS shades to suit all finishing shades.
- Excellent build properties and hold-up on edges.
Product Specification
| Technical Data | |
|---|---|
| Volume Solids | 45 ± 2% (may vary with colour) |
| VOC Content | 534 + 20 g/litre (varies with colour) |
| SG | 1.16 kg/lt (may vary with colour) |
| Storage Conditions | Store in dry, cool conditions and protect from frost. |
| Shelf Life | Minimum 12 months if stored as above in unopened containers. |
| Flash Point | 23-60℃ |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
| Minimum | 75 µm | 167 µm | 6.0 m²/litre |
| Maximum | 125 µm | 278 µm | 3.6 m²/litre |
| Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. | |||
Drying Times
| Product Data | |||||
|---|---|---|---|---|---|
| Applied to 15 microns DFT | 10℃ | 23℃ | 35℃ | ||
| Dust Free | 1 hr | 20 min | 15 min | ||
| Hard Dry | 9 hr | 4 hr | 2½ hr | ||
| Overcoating | Minimum | 9 hr | 4 hr | 2½ hr | |
| Maximum | Indefinite if clean and sound | ||||
| Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. | |||||
Surface Preparation
- All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams.
- Blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns.
Mixing
Must be mixed thoroughly by using a mechanical agitator before use. Agitate periodically to ensure paint remains homogeneous.
Thinner
1006 Thinner can also be used to clean equipment.
Application Conditions
- Only apply in conditions of good ventilation which must be maintained during drying and curing.
- Do not apply when rain, mist, sleet or snow are imminent.
- During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3ºC above the dew point.
- Paint temperature should ideally be at a minimum of 15ºC.
Application Methods
| Method | Airless Spray | Conventional Spray | Brush | Roller |
|---|---|---|---|---|
| Yes | No | Yes | Yes |
- Airless Spray: Output fluid pressure at tip 2000 psi min., Tip Size 15-19 thou (0.38-0.48 mm).
- Thinning of the coating is not recommended as this will reduce the build qualities.
- Application by brush/roller will result in a reduced film thickness and is recommended only for small areas of touch up/remedial work.
Product Notes
- Overcoating - not applicable. Damaged areas may be touched up after a minimum of 4 hours at 23ºC.
- In common with most alkyd primers and primer/finishes, this product is not recommended for extended exterior exposure, exposure in aggressive or coastal locations, or for immersion. Epoxy primers are preferred for these conditions, please consult Axalta Coating Systems for advice.
- Some shades may contain lead based colourants and these are labelled (L).
- *Colours such as yellows, reds and oranges have lower opacity, especially when produced using lead-free pigments. Two or three coats of these shades may be required, relative to only one coat of a grey or red oxide, so that yellows, bright reds and oranges may not be suitable as one coat systems.
Health & Safety
Containers are provided with safety labels which should be observed. Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request from Axalta Coating Systems, or from the attachments section above.
Product Details
4320-899193
Data sheet
- Manufacturer
- Axalta
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Semi-Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Solvent
- -
- Key Features
- Available in 350+ colours
- Touch Dry (at 20°C)
- 20 Mins
- Fully Cured (at 20°C)
- 4 hr
- Coverage
- 6.0 m² /litre
- Recommended Thinner/Cleaner
- 1006 Thinner
- Min. Application Temperature
- Steel temperature should remain at least 3ºC. Paint temperature should ideally be at a minimum of 15ºC
- VOC
- 534 + 20 g/litre (varies with colour)
- Shelf Life (from date of manufacture)
- Minimum 12 months if stored as above in unopened containers
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Primer/Finish
- Usages
- 1 Coat
- Usages
- Direct to Metal
- Product Usage Type
- Primer & Topcoat
- Product Range
- ViterLac
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 20 mins
- Product Attributes
- High Build
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Primer/Finish
- Product Attributes
- 1 coat
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterLac 046 One Coat Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Axalta 1006 Thinner
We no longer stock this product, but can recommend Axalta Thinner Fast Industrial (TH120) as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team...
In stock
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery