- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Axalta ViterThane PLS Recoatable PU Finish, A two pack recoatable polyurethane semi-gloss finish for use on protective systems for steelwork.
- Excellent colour retention and indefinitely overcoatable.
- Excellent chemical resistance and low temperature cure.
- An aliphatic polyurethane providing a tough and durable semi-gloss finish with excellent UV resistance.
- Wide colour range of over 350+ RAL and BS shades to suit all finishing shades.
- Approved to UK Network Rail Protective Treatment M24 (Item No.7.3.1) as the finish coat of a 3 coat system.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Axalta ViterThane PLS Recoatable PU Finish A high solids two pack epoxy intermediate or finish, designed for application over ViterBond ST200 or WG200.
Approvals/Certification: Approved to UK Network Rail Protective Treatment M24 (Item No.7.3.1) as the finish coat of a 3 coat system.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- An aliphatic polyurethane providing a tough and durable semi-gloss finish with excellent UV resistance.
- High build properties – up to 125 microns dft.
- Wide colour range of over 350+ RAL and BS shades to suit all finishing shades.
- Excellent chemical resistance and low temperature curing down to -5ºC.
- Excellent solvent and chemical resistance.
- Use as a site or shop applied finish.
- Easily cleaned surface.
Product Specification
| Technical Data | |
|---|---|
| Volume Solids | 58 ± 2% (may vary with colour) |
| VOC Content | 399 + 20 g/litre (varies with colour) |
| SG | 1.40-1.60 kg/lt mixed, varies with colour. |
| Storage Conditions | Store in dry, cool conditions and protect from frost. |
| Shelf Life | Minimum 12 months if stored as above in unopened containers. |
| Flash Point | 23-60℃ |
Film Thickness Range And Coverage
| Product Data | |||||
|---|---|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |||
| Minimum | 50 µm | 86 µm | 11.6 m² /litre | ||
| Maximum | 125 µm | 216 µm | 4.6 m² /litre | ||
| Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. | |||||
Drying Times
| Product Data | ||||||
|---|---|---|---|---|---|---|
| Applied to 50 microns DFT | 5℃ | 10℃ | 23℃ | 35℃ | ||
| Dust Free | 3 hr | 2 hr | 1 hr | 45 min | ||
| Hard Dry | 9 hr | 6 hr | 3 hr | 2 hr | ||
| Overcoating | Minimum | 24 hr | 24 hr | 12 hr | 10 hr | |
| Maximum | Indefinite if clean and sound | |||||
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
- This product is a finish coat and should be applied over an appropriate primer or intermediate coating.
- All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts or other contamination.
Mixing
Mix only in the proportions stated, mixing each component individually then together using a mechanical agitator. Agitate periodically during use to ensure product remains homogeneous.
Mixing Ratio
- Base: 9 parts by volume
- Hardener: 1 part by volume
Thinner
Equipment Cleaner: 1737 Thinner
Application Conditions
- Only apply in conditions of good ventilation which must be maintained during drying and curing.
- Do not apply when rain, mist, sleet or snow are imminent.
- During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3ºC above the dew point.
- Only apply this product when the above conditions can be maintained throughout the critical application and drying/curing process.
- Paint temperature should ideally be at a minimum of 15ºC.
Application Methods
| Method | Airless Spray | Conventional Spray | Brush | Roller |
|---|---|---|---|---|
| Yes | Yes | Yes | Yes |
- Airless Spray: Output fluid pressure at tip 2200-2500 psi, Tip Size: 13-17 thou (0.33-0.43mm).
- For application by airless spray up to 5% 1737 Thinner may be added for application under cool conditions and to apply at lower dft’s.
- For conventional spray up to 10% 1737 Thinner will be necessary. Maximum dft by this method is 75 microns.
- This product is suitable for application by brush or roller, but due to its fast drying properties intricate structures should be avoided.
Product Notes
- Overcoat with itself or ViterThane PLV only.
- For optimum opacity use a primer/undercoat of a suitable shade.
- High humidity and condensation will impair gloss if exposed during application and curing.
- Some shades (2906 line) may contain lead based colourants and these are labelled (L).
- Contains isocyanates – refer to Safety Data Sheet.
Health & Safety
Containers are provided with safety labels which should be observed. Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request from Axalta Coating Systems, or from the attachments section above.
Product Details
4330-899582
Data sheet
- Manufacturer
- Axalta
- For Use By
- Professional Use
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Mid Sheen
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Parts
- 2 part pack - base and activator
- Mixing Ratio
- Base - 9 parts by volume (or 2906 (L) – see Product Notes). Hardener 1 part by volume
- Suitable Substrates
- Steel
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 60 mins
- Coverage
- 11m² per litre
- Recommended Thinner/Cleaner
- 1737 Thinner
- Min. Application Temperature
- Steel temperature should remain at least 3ºC above the dew point. Paint temperature should ideally be at a minimum of 15ºC.
- VOC
- 399 + 20 g/litre (varies with colour)
- Shelf Life (from date of manufacture)
- Minimum 12 months if stored as above in unopened containers
- Touch Dry
- 1 hour
- Recommended Wet Film Thickness
- Min: 86 µm - Max: 216 µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Dry to Recoat (at 23°C)
- 3 h
- Fully Cured (at 23°C)
- 12 h
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Steelwork
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- High Build
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Easy to Clean
- Usages
- Chemical Resistance
- Usages
- UV Resistant
- Product Usage Type
- Topcoat
- Product Range
- ViterThane
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Categorised As
- Metal Paints > Low Temperature Topcoats
- Seasonal
- Cold Weather
- Product Type
- Acrylic Polyurethane
- Environment
- Atmospheric
- Environment
- Low Temperature
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Product Attributes
- Gloss Retention
- Product Attributes
- Tough / Durable
- Resistance to
- UV
- Resistance to
- Chemicals
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterThane PLS Recoatable PU Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Axalta 1737 Thinner
Axalta 1737 Thinner, for use with the Axalta range of coatings, is a specially formulated blend of solvents designed to mix with its compatible paint/coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. It can also be used for the cleaning of some surfaces prior to application of the coating...
Price
£56.60
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery