Follow us on:

Bullet Roof Single Ply Primer | Roof Reinforcement

Bullet Roof Single Ply Primer

PUR155
BUL4339
Trustpilot

Bullet Roof Single Ply Primer, a one-component flexible ployurethane primer promoting adhesion for polyurethane elastomers on concrete, metal, wood, asphalt, bituminous membranes, ceramics, PVC & EDPM.

  • Specially formulated to adhere different types of polyurethane membranes even with different hardening speeds
  • Application temperature from +5°C
  • Operating temperature from -30°C to +90°C
  • Elongation rate of 35%
  • Fully cured in 2 days (at 22°C)

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Colour
Size
£93.26(incl. VAT)
£77.72(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Bullet Roof Single Ply Primer is a one-component flexible ployurethane primer that promotes adhesion for polyurethane elastomers on concrete, metal, wood, asphalt, bituminous membranes, ceramics, PVC & EDPM.

Specially formulated to adhere different types of polyurethane membranes even with different hardening speeds, it has a variety of options in use for over application and can be applied in temperatures as low as 5°C.



Quick Links - Click To Jump To Section:



Features & Benefits

  • One-component flexible ployurethane primer
  • Adhesion promoter for polyurethane elastomers on a variety of substrates:
    • Concrete
    • Metal
    • Wood
    • Asphalt
    • Bituminous membranes
    • Ceramics
    • PVC
    • EDPM
  • Specially formulated to adhere different types of polyurethane membranes even with different hardening speeds
  • Elongation rate of 35%
  • Variety options in use for over application
  • Low VOC content
  • Application temperature from +5°C
  • Operating temperature from -30°C to +90°C
  • Fully cured in 2 days



Application

Substrate Preparation

The preparation of the substrate is fundamental, therefore the surface to be treated must be sound and free from any pollutant, dry, consistent and must have a tensile strength of at least 1.5 MPa. In any case, it is necessary to perform a surface preparation of the flooring such as sandblasting, milling, peening, sanding depending on the type of surface.

The free and stagnant water coming from the substrate or from pre-vious washing operations or from weather events must be removed or dried with suitable means.

Product Preparation

Single-component product ready to use.

Application

It is applied with normal painting equipment such as a brush, roller or airless spray.

Apply Bullet Roof Single Ply Primer in the ratio of 150-200 g/m2 in order to avoid pro-duct accumulations. After the application wait from 2 hours to 48 hours depending on the room temperature.

Cleaning

Tools must be cleaned after use.

Safety

In the application of this product it is advisable to use glasses, rubber gloves and all the PPE required by the regulations in force for the use of chemical substances.

For all additional information, please consult the product safety data sheet.



Technical Data

Product Specification
Colour Transparent / light brown
Viscosity at 20°C 400 ± 100 mPa·s
UNI EN ISO 2555
Solid content 100%
EN ISO 3251
Pot life at 22°C 90 ± 10 minutes
EN ISO 9514
Theoretical consumption 150-200 g/m²
Curing at 22°C Over-application Drying Time
50% U.R. Over concrete from 1 h to 48 hours
  Over steel from 8 h to 48 hours
  Over PVC, bituminous membranes from 2 h to 48 hours
  - Complete hardening 2 days
Storage The product of the original sealed packages, kept in a dry and protected place at a temperature between 5°C and 35°C, can be kept for 6 months.



CE
EN 13813 DoP 050 Product type 6362
Screed material and floor screeds based on synthetic resins
Corrosive substances release SR  
Bond strength B2,0



Click to go back to the top of the page

Product Details
4339-581314

Data sheet

Manufacturer
Bullet
Colour
Clear
Single, Two or Three Pack
Single
Pack Size
5KG
Parts
One
Key Features
Specially formulated to adhere different types of polyurethane membranes even with different hardening speeds
Coverage
150-200g/m²
Min. Application Temperature
+5°C
Solids by Volume
100%
Drying time
From 1h to 48 hours
Full Cured (at 22°C)
2 days
Product Usage Type
Primer
Colour Family
Clear
Attachments
Download
Product Data Sheet
Download
Safety Data Sheet
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Bullet Roof Single Ply Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT