Follow us on:

HMG PVC17 Colours | 1K Vinyl Acrylic, 450+ Colours
HMG PVC17 Colours | 1K Vinyl Acrylic, 450+ Colours

HMG PVC17 Colours

TOPPVC17
HMG4356

Single pack vinyl acrylic in 5,000 colours for direct application to many difficult to coat substrates including hard plastics, powder coatings, most factory finishes and architectural cladding.

  • Also suitable for flexible substrates, PVC curtain material, uPVC, plastisol, cladding coatings and fibreglass*
  • *for areas incorporating draught seals and gaskets, HMG PVC PRO is the preferred product
  • Exceptional flexibility and adhesion
  • Quick drying - touch dry in 15 mins, re-coat in 1 hour
  • Coverage: 10m² per litre
  • HMG PVC17 Colours Aerosol also available
  • For professional use only

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£39.53(incl. VAT)
£32.94(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Quick Links - Click To Jump To Section:




Features & Benefits


  • For professional use only
  • Coverage: 10m2 per litre
  • Available in Gloss/Satin/Matt
  • Flashpoint: -9℃
  • Application by brush or compliant/pressure pot spray
  • Manufactured under the auspices of an ISO 9001 management system
  • Suggested primer: HMG Synthetic BDX Primer
  • Thinner: HMG 2661 - for application in temperatures in excess of 25⁰C, Thinner 2604 slow thinner may be used to
    increase wet edge time
  • Full BS, RAL, agricultural and commercial vehicle colour ranges, including metallic finishes
  • Available in 5,000+ colours from RAL, NCS, and British Standard



Substrates


  • HMG PVC17 for application to most suitably prepared hard plastics, PVCu, powder coated, and other factory finished cladding, PVC curtains and many other plastic substrates
  • New curtains and other flexible substrates will require airing for at least 7 days prior to coating, ensuring any trapped plasticisers can escape, failure may result in poor adhesion and premature failure of coatings
  • Not suitable for coating areas incorporating draught seals and gaskets or over bitumen or chlorinated rubber coatings



Application Climate


  • Substrate temperature should be 5⁰C or above for application and during cure, and a minimum of 3⁰C above the dew point
  • Adequate dry air ventilation should be supplied during drying



Application Information


  • Thinning should only take place after material is thoroughly mixed
  • Application and use should always conform with the codes of practice described in BS 6150 and BS 5493



Surface Preparation


  • Ensure surfaces are clean, dry and free from grease, oils, dust and other contamination prior to application
  • Thoroughly clean and degrease using suitable HMG Prep Clean 2805 for new or HMG 2806 for old or aged substrates



General Specification


  • Clean to remove all loose debris and other contamination
  • Thoroughly clean and degrease using suitable HMG Prep Clean – 2805 for use on new substrates, 2806 for old or aged
  • Apply by cloth and quickly remove using clean lint free cloth
  • Repeat until surface is clean and free from all deposits (grease, oil, silicone)
  • Replace cloths regularly to ensure that contamination is not re-applied to the surface
  • Lightly abrade using Scotch-Brite pad to provide key, wipe with lint free cloth to remove loose dust prior to application



Painting existing coatings (powder coated)


  • Always check compatibility of new and old coatings prior to full application
  • Check all existing coatings are well adhered with all loose and failed material removed back to firm with all edges well feathered
  • Degrease using suitable HMG Prep Clean
  • Remove any rust back to clean metallic appearance, spot prime with suitable HMG Primer or HMG Ferrozinc Rust Convertor
  • Lightly abrade existing coatings to provide key, wipe with lint free cloth to remove loose dust



Application


  • A light dusting should then be sprayed on to the plastic to check that all contaminants have been removed
  • Apply 2 coats via brush or compliant spray gun to give full and even coverage
  • Allow a flash off time of 10-15 mins between coats
  • Film build should not exceed 35 microns DFT
  • The product will be touch dry in around 10-15 mins, hard dry after 45-60 minutes depending on ambient atmosphere
  • Windows and doors should be left open as long as possible, to allow the coating to fully cure
  • HMG recommend PVC Pro for painting uPVC windows and doors



For further assistance please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information



Health And Safety


  • Refer to Safety data sheet (see section above) and tin label prior to use
  • Suitable respiratory equipment should be worn when spraying
  • Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water or disposed of in a non-combustible container with tight fitting lid
Product Details
4356-841864

Data sheet

Manufacturer
HMG Paints Limited
For Use By
Professional Use
For Use On
uPVC
PVC
Powder Coated Surfaces
Hard Plastics
Architectural Cladding
Plastisol
Cladding Coatings
Metallic Finishes
Fibreglass
Application Method
Brush
Spray
Sheen
Matt
Satin
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
1L
2.5L
5L
Touch Dry (at 20°C)
15 Mins
Dry to Recoat (at 20°C)
Minimum of 1 hour
Fully Cured (at 20°C)
8 Hours
Coverage
10m²/L
Min. Application Temperature
5°C
Density
0.947 g/cm³
Solids by Volume
28.9 %
VOC
0.745Kg/L
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
Finish
Matt
Satin
Gloss
Recommended Dry Film Thickness
25 µm
Recommended Wet Film Thickness
100 µm
UN Number
UN1263
UN Number
UN1263
Colour(s)
Fully Tintable
Base Type
Solvent-Based
Suitable For Use On
UPVC
Suitable For Use On
Hard Plastics
Suitable For Use On
PVC
Suitable For Use On
Plastisol
Suitable For Use On
Fibreglass
Suitable For Use On
Powder Coated Surfaces
Suitable For Use On
Architectural Cladding
Suitable For Use On
Cladding Coatings
Suitable For Use On
Metallic Finishes
Finish
Matt
Finish
Satin
Finish
Gloss
Application Method
Spray
Application Method
Brush
Usages
Renovation
Product Usage Type
Topcoat
Product Range
PVC17
Colour Family
Neutral
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
White
Categorised As
PVC & Plastic Cladding Paint
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG PVC17 Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

    

You might also like
HMG Synthetic BDX Primer

HMG Synthetic BDX Primer

HMG Synthetic BDX Primer is a high build, anti-corrosive, single pack alkyd primer for use under all HMG synthetic topcoats, combining high build and excellent sandability with outstanding application and scratch filling properties. For use on suitably prepared structural steel, chassis, fabrication and aluminium Can be applied to bare...

Price £19.03 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Ferrozinc Rust Converter

HMG Ferrozinc Rust Converter

HMG Ferrozinc Rust Converter is a high performance water-based rust converter, ideal for application to areas difficult to shot-blast or where total removal of rust is not possible. Also suitable for surfaces difficult to dry due to existing moisture. Easily applied single pack material Changes colour to show rust has been neutralised...

Price £16.54 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Prep Clean 2805 | General Surface Cleaner

HMG Prep Clean 2805

A medium strength, anti static preparatory cleaning solvent. Suitable for degreasing new uPVC and other plastic substrates.

Price £58.40 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Prep Clean 2806 | General Surface Cleaner

HMG Prep Clean 2806

HMG Prep Clean 2806 is a strong preparatory cleaning solvent. Suitable for degreasing of old u-PVC substrates.

Price £57.11 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2604 | Solvent & Thinner

HMG Thinner 2604

HMG Thinner 2604 is a slow thinner. For use with compatible HMG systems.

Price £14.78 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2661 | Solvent & Thinner

HMG Thinner 2661

A standard thinner that, when used with HMG PVC 17, allows for direct application of 5,000 colour options in temperatures in excess of 25⁰C on hard-to-coat surfaces such as hard plastics, powder coatings, most factory finishes, and architectural cladding.

Price £15.59 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG PVC17 Colours Aerosol | 1K Vinyl Acrylic available in 450+ colours

HMG PVC17 Colours Aerosol

Vinyl Acrylic Aerosol with 5,000 colours - exceptional flexibility and adhesion for direct application to many difficult to coat substrates including hard plastics, powder coatings, most factory finishes and architectural cladding. 400ml/16oz Aerosol Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks Also...

Price £43.81 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery