- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Acrylic Stoving Enamel is a durable and easy to use fast curing stoving enamel that is designed to give optimum durability and excellent colour retention on exterior exposure. Stoving paints are for force-drying; for painting stoves, see our heat-resistant paints.
- Ease of use
- Good long term durability
- High gloss
- Available in 3,500 colours from RAL, NCS, and British Standard
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Acrylic Stoving Enamel is a durable and easy to use fast curing stoving enamel that is designed to give optimum durability and excellent colour retention on exterior exposure.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Stoving Schedule
- Product Notes
- Health & Safety
Features & Benefits
- Ease of use
- Good long term durability
- High gloss
- Available in 3,500 colours from RAL, NCS, and British Standard
Product Specification
| Technical Data | |
|---|---|
| Volume Solids: | 53.2% |
| VOC Content: | 0.48Kg/L |
| SG: | - |
| Viscosity: | 300 mPas |
| Density: | 0.989 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | 24°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| HVLP: | 20 µm | 50 µm | |
| Gravity Gun: | 20 µm | 50 µm | |
Coverage: 20 square metres per litre at 20 microns dft (Theoretical)
- HMG Technical Data Sheets indicate a Dry Film Thickness that will be achieved when applying a particular Wet Film Thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 120°C | |
|---|---|
| Fully Cured: | 30 minutes |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| HVLP | Gravity Gun | ||||
| Mixing Ratio: | Base: 1 | Base: 1 | |||
| Thinner: Up to 30% | Thinner: Up to 30% | ||||
| Thinner Options: | Thinner 2691 | Thinner 2691 | |||
| Viscosity: | 30-40 seconds B4 cup | 30-50 seconds B4 Cup | |||
| Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | |||
| Flash Off: | 30 minutes | 30 minutes | |||
Stoving Schedule
- This product must be 'Stoved' after application
- The ovens should always be at specified temperature before use
HMG Acrylic Stoving Enamel:
- 30mins @ 120°C or 15mins @ 150°C metal temperature
Product Notes
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Liquid |
| Colour: | According to product specification. |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value: | Not determined |
| Change in Condition | |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 100°C |
| Flash Point: | 24°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | 315°C |
| Decomposition temperature: | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 0.7 Vol % |
| Explosion limits: Upper: | 7.5 Vol % |
| Vapour pressure at 20°C: | 5 hPa |
| Density at 20°C: | 0.989 g/cm³ |
| Relative density: | Not determined |
| Vapour density: | Not determined |
| Evaporation rate: | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | 300 mPas |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 35.6% |
| Solids content: | 53.2% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Product Details
4357-829773
Data sheet
- Manufacturer
- HMG Paints Limited
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- Application Method
- HVLP
Gravity Gun - Sheen
- Matt
Satin
Gloss - Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Mixing Ratio
- Base: 1 - Thinner: Up to 30%
- Key Features
- Ease of use. Good long term durability. High gloss
- Coverage
- 20 square metres per litre @ 20 microns dft (Theoretical)
- Recommended Thinner/Cleaner
- Thinner 2691
- Density
- 0.989 g/cm³
- Solids by Volume
- 53.2 %
- Heat Resistance (up-to)
- 180ºC (dry) may discolour
- VOC
- 0.48Kg/L
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt, Satin and Gloss
- Size
- 1L, 2.5L, 5L
- Recommended Dry Film Thickness
- 20 µm
- Recommended Wet Film Thickness
- 50 µm
- UN Number
- UN1263
- Drying time
- 30 Mins @ 120°C
- Base Type
- Solvent-Based
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- HVLP
- Application Method
- Gravity Gun
- Product Usage Type
- High Temperature
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Acrylic Stoving Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Thinner 2691
HMG Thinner 2691 is a thinner for use in various applications. For use with compatible HMG systems.
Price
£13.30
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery