- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG D66 Economy Line is an alkyd based synthetic enamel designed for general purpose brush and spray requirements. It is also oil and diesel resistant making it a good choice for agricultural, appliance & machinery finishes.
- Good performance
- Oil and diesel resistant
- Quick drying agricultural paint
- Quick drying appliance paint
- Quick drying machinery paint
- Available in 5,000+ colours from RAL, NCS, and British Standard
- Also available as an aerosol, please see HMG D66 Economy Line Aerosol
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG D66 Economy Line is an alkyd based synthetic enamel designed for general purpose brush and spray requirements. It is also oil and diesel resistant making it a good choice for agricultural, appliance & machinery finishes.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Good performance
- Oil and diesel resistat
- Quick drying agricultural paint
- Quick drying appliance paint
- Quick drying machinery paint
- Available in 5,000+ colours from RAL, NCS, and British Standard
Product Specification
Technical Data | |
---|---|
Volume Solids: | 56.8% |
VOC Content: | 0.445kgs/ltr |
SG: | - |
Viscosity: | 240 mPas |
Density: | 1.029 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | 31°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Brush: | 50 µm | 100 µm | |
Compliant Spray Gun: | 50 µm | 100 µm |
Coverage: 10 square metres per litre @ 50 microns dft.
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 1 - 2 hours |
Dry To Handle: | 4 hours |
Dry To Recoat: | After 24 hours |
Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Brush | Compliant Spray Gun | ||||
Mixing Ratio: | Base: 10 | Base: 10 | |||
Thinner: up to 0.5 | Thinner: Up to 1 | ||||
Thinner Options: | Thinner 2611 | Thinner 2611 | |||
Thinner 2612 | Thinner 2612 | ||||
Viscosity: | - | - | |||
Number Of Coats (Guide Only): | 2 coats | 2 full coats | |||
Flash Off: | - | 30 minutes between coats |
For futher information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or
Product Notes
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification. |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 135°C |
Flash Point: | 31°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 200°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 0.6 Vol % |
Explosion limits: Upper: | 7.0 Vol % |
Vapour pressure at 20°C: | Not determind |
Density at 20°C: | 1.029 g/cm³ |
Relative density: | Not determind |
Vapour density: | Not determind |
Evaporation rate: | Not determind |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | 240 mPas |
Viscosity: Kinematic: | Not determined |
Solvent content: Organic solvents: | 0.7% |
Solids content: | 56.8% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a noncombustible container with a tight fitting lid.
Data sheet
- Manufacturer
- HMG Paints Limited
- Sheen
- Matt
Satin
Gloss - Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L - Parts
- One Part Pack
- Base Type
- Alkyd
- Mixing Ratio
- Brush: Base 10 - Thinner Up to 0.5
- Mixing Ratio
- Compliant Spray Gun: Base 10 - Thinner Up to 1
- Key Features
- Oil and diesel resistant. Quick drying Agricultural Paint. Quick drying Appliance Paint. Quick drying Machinery Paint.
- Touch Dry (at 20°C)
- 2 hours
- Dry to Handle (at 20°C)
- 4 Hours
- Dry to Recoat (at 20°C)
- After 24 Hours
- Fully Cured (at 20°C)
- 24 Hours
- Recommended Thinner/Cleaner
- Thinner 2611/2612
- Density
- 1.029 g/cm³
- Solids by Volume
- 56.8 %
- VOC
- 0.445kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt, Satin and Gloss
- Size
- 1L, 2.5L and 5L
- Recommended Dry Film Thickness
- 50 µm
- Recommended Wet Film Thickness
- 100 µm
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Oil & Diesel Resistance
- Product Usage Type
- Topcoat
- Product Range
- D66
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Product Type
- Epoxy
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Product Attributes
- High Solids
- Resistance to
- Oil & Diesel
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG D66 Economy Line is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2611
HMG Thinner 2611 is a medium thinner. For use with compatible HMG systems.
HMG Thinner 2612
HMG Thinner 2612 is a slow thinner. For use with compatible HMG systems.
HMG D66 Economy Line Aerosol
HMG D66 Economy Line Aerosol is a high quality Synthetic Alkyd Enamel aerosol. It offers good through drying and outstanding film hardness and toughness. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG D66 Economy Line. 400ml/16oz Aerosol Available in packs of 1 or packs...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...