- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Designed to provide a hard wearing yet economical surface coating. Its durability is achieved by the use of excellent quality resins, which also provide the user with a product that is very easy to use.
- Application via Brush or Roller
Product customisation
Don't forget to save your customization to be able to add to cartHMG Polyurethane Floor Paint is designed to provide a hard wearing yet economical surface coating. Its durability is achieved by the use of excellent quality resins, which also provide the user with a product that is very easy to use.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Ease of use
- Hard wearing yet economical
Product Specification
Technical Data | |
---|---|
Volume Solids: | 52.5% |
VOC Content: | 0.450kgs/ltr |
SG: | - |
Viscosity: | 250 mPas |
Density: | 0.929 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | 31°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Brush: | n/a | n/a | |
Roller: | n/a | n/a |
Coverage: 10 square metres per litre (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 2 hours |
Dry To Handle: | 4 - 6 hours |
Dry To Recoat: | After 8 hours @ 20°C |
Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Brush | Roller | ||||
Mixing Ratio: | Ready for use | Ready for use | |||
- | - | ||||
Thinner Options: | n/a | n/a | |||
- | - | ||||
Viscosity: | n/a | n/a | |||
Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | |||
Flash Off: | n/a | n/a |
Product Notes
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 135°C |
Flash Point: | 31°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 200°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 0.6 Vol % |
Explosion limits: Upper: | 7.0 Vol % |
Vapour pressure at 20°C: | 6.7 hPa |
Density at 20°C: | 0.929 g/cm³ |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not determined |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | 250 mPas |
Viscosity: Kinematic: | Not determined |
Solvent content: Organic solvents: | 28.4% |
Solids content: | 52.5% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Concrete
- Application Method
- Brush, Roller
- Sheen
- Matt, Satin, Gloss
- Colour
- Ready Mixed / Standard
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Key Features
- Ease of use. Available in a wide colour range including RAL & BS shades.
- Touch Dry (at 20°C)
- 2 Hours
- Dry to Handle (at 20°C)
- 4 - 6 Hours
- Dry to Recoat (at 20°C)
- After 8hrs @ 20°C
- Fully Cured (at 20°C)
- 24 Hours
- Density
- 0.929 g/cm³
- Solids by Volume
- 52.5 %
- VOC
- 0.450kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Gloss
- Size
- 5Ltr
- UN Number
- 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Topcoat
- Colour Family
- Grey
- Colour Family
- Red
- Product Type
- Polyurethane
Questions
Question about the product
Su on 2024-04-18 17:16:13 | Question:
Hi is this suitable to paint laminate flooring regards Su |
Answer from Rawlins’ Technical Team:
Thank you for your enquiry, please e-mail [email protected] to confirm what type of laminate flooring this will be required for, in order for us to assist further. | |
Sam on 2021-04-30 09:45:21 | Question:
Is this water based ? |
Answer from Rawlins’ Technical Team:
It isn't, it is solvent based. | |
Val Edwards on 2020-06-26 01:44:17 | Question:
Is this paint suitable for outdoor use please? |
Answer from Rawlins’ Technical Team:
No this paint is for internal use only, for an external floor assuming the substrate is compatible, clean, dry and sound we can recommend Bradite Floor-it. Please check the Technical Data Sheet for preparation, application details and primer requirements. This is available in mant RAL and BS colours. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Polyurethane Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT