- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Industrial Cellulose is a fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates.
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Good coverage, up to 10 square metres per litre
- High quality industrial finishing of all types, particularly over both hard and softwood substrates
- High build
- High gloss
- Simple to use
- Quick and economical
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG Industrial Cellulose is a fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates.
HMG industrial cellulose gives high build, high gloss and great simplicity of use. These properties combined offer the user a quick and economical way to achieve a high standard of work.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Good coverage, up to 10 square metres per litre
- High quality industrial finishing of all types, particularly over both hard and softwood substrates
- High build
- High gloss
- Simple to use
- Quick and economical
Product Specification
Technical Data | |
---|---|
Volume Solids: | 30.7% |
VOC Content: | 0.66Kg/L |
SG: | - |
Viscosity (kinematic @ 20°C): | 79 s (DIN 53211/4) |
Density: | 0.967 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | -4°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Aerosol: | 15 μm | 50 μm | |
Compliant Spray: | 15 μm | 50 μm | |
Pressure Pot: | 15 μm | 50 μm |
Coverage: 10 square metres per litre @ 50 microns (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 10 minutes |
Dry To Recoat: | At any stage after flashoff. |
Fully Cured: | 1 hour |
Surface Preparation
- Over Wood: Fill grain as appropriate using good quality wood filler. Flat thoroughly using 180 - 240 garnet paper. tak rag surface.
- HMG Sanding Sealer or HMG Pre-Cat Sanding Basecoat are used on woods subject to grain raising prior to application of industrial cellulose lacquers.
- Pre-treatment: Under 'pigmented' Industrial Cellulose colours on wood and on steel substrates a variety of HMG build up systems can be used including: HMG E9 White/Grey Primer, and HMG 2 pack or stoving primer systems.
NB: If Industrial cellulose is to be used over aluminium and alloys an HMG etch primer or washfiller must be used. For full advice on priming difficult substrates, please contact: Rawlins Team on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Aerosol | Compliant Spray Gun | Pressure Pot | |||
Mixing Ratio: | Ready for use | Base: 1 | Base: 1 | ||
- | Thinner: 1 | Thinner: 1 | |||
Thinner Options: | - | Thinner 2641 | Thinner 2641 | ||
- | Thinner 2642 | Thinner 2642 | |||
Viscosity: | Ready for use | 25 seconds B4 cup | 25 seconds B4 cup | ||
Spray Gun Setup: | N/A | 1.4 - 1.8 | 1.2 - 1.4 | ||
Number Of Coats (Guide Only): | 2 full coats | 2 full coats | 2 full coats | ||
Flash Off: | 10 minutes | 10 minutes | 10 minutes |
Product Notes
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 36°C |
Flash Point: | -4°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 315°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 1.1 Vol % |
Explosion limits: Upper: | 7.5 Vol % |
Vapour pressure at 20°C: | 11.2 hPa |
Density at 20°C: | 0.967 g/cm³ |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not determined |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | Not determined |
Viscosity: Kinematic: | 79 s (DIN 53211/4) |
Solvent content: Organic solvents: | 73.2% |
Solids content: | 30.7% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Interior / Exterior Use
- Exterior Use
- Sheen
- Matt
Satin
Gloss - Single, Two or Three Pack
- Single
- Pack Size
- 1L
5L - Suitable Substrates
- Hard and softwood substrates.
- Touch Dry (at 20°C)
- 10 Minutes
- Dry to Recoat (at 20°C)
- At any stage after flash off.
- Fully Cured (at 20°C)
- 1 Hour
- Density
- 0.967 g/cm³
- Solids by Volume
- 30.7 %
- Heat Resistance (up-to)
- 70°C
- VOC
- 0.66Kg/L
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt, Satin and Gloss
- Size
- 5L and 20L
- Recommended Dry Film Thickness
- 15 μm
- Recommended Wet Film Thickness
- 50 μm
- UN Number
- 1263
- Suitable For Use On
- Hardwood
- Suitable For Use On
- Softwood
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Industrial Cellulose is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Cellulose Hi Seal Sanding Sealer
HMG Cellulose Hi Seal Sanding Sealer is a medium solids cellulose based basecoat/sealer for use on wood and veneer. Fast drying Easily sanded
HMG Pre Cat Standard Sealer
HMG Pre Cat Standard Sealer is a 1K basecoat/sealer for use on wood and veneer. Fast drying. Contains no sterate. Excellent and easy sandability. Gives excellent and tenacious adhesion to wood with minimal preparation. Minimises sinkage of topcoats. Enables fast throughput of work to a high standard.
HMG Thinner 2641
HMG Thinner 2641 is a medium fast thinner. Designed for use with cellulose based systems.
HMG Thinner 2642
HMG Thinner 2642 is a medium slow thinner which can be used with compatible HMG systems. For use with cellulose based systems.