Follow us on:

HMG Cellulose Fluorescent

HMG Cellulose Fluorescent

TOPCELLFLR
HMG4377

HMG Cellulose Fluorescent is a high quality fluorescent cellulose product for automotive and industrial use. 

HMG Cellulose Fluorescent is part of a three coat system:

3 Coat System Details
Coat 1 HMG Cellulose APS Primer (White)
Coat 2 HMG Cellulose Fluorescent
Coat 3 HMG Acrythane XSC21 Clear

  • Part two of a three coat system
  • For use in classic car refinishing and industrial applications
  • Also available as an aerosol, please see HMG Cellulose Fluorescent Aerosol
Colour
Pick a Colour
  • Current colour: Blaze Orange
Close colour picker
  • RAL6032 - Signal Green
  • Blaze Orange
  • Horizon Blue
  • Fire Orange
  • Aurora Pink
  • Saturn Yellow
  • Rocket Red
Size
Finish
£95.96(incl. VAT)
£79.97(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG Cellulose Fluorescent.  A high quality fluorescent cellulose product for automotive and industrial use.  To be used as part of a 3 coat system.

HMG Cellulose Fluorescent is part of a three coat system:

3 Coat System Details
Coat 1 HMG Cellulose APS Primer (White)
Coat 2 HMG Cellulose Fluorescent
Coat 3 HMG Acrythane XSC21 Clear



Please note more than one coat of each may be required depending on application to achieve desired results.

Click To Jump To Section:




Features & Benefits


  • For use in classic car refinishing and industrial applications



Additional Infomation

  • The light-fastness of fluorescent pigments (all grades) is between 2 - 3 on the blue wool scale (of 8). This level of colour fastness is increased to 3 - 4 by over-lacquering with a UVRA containing clear varnish or lacquer.  Please Rawlins Technical on  Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected] for specific recommendations.
  • In all environments, fluorescent paints will fade 5 - 10 times faster than conventional industrial, decorative or automotive coatings.
  • Signal Green suitable for small areas only.
  • Not to be used in connection with 2004/42/CE
  • Not to be Used under SI2005:27773



Product Specification


Technical Data
Volume Solids: 48.2 %
VOC Content: 0.70kgs/ltr
SG: -
Viscosity: 300 mPas
Density: 1.049 g/cm³
Storage Conditions: Store between 5°C - 25°C.  When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Flash Point: 4°C



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Compliant Spray: 20 μm 50 μm
Pressure Pot: 20 μm 50 μm



Coverage: 20 square metres per litre @ 20 microns dft (Theoretical)

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 20°C
Touch Dry: 10 minutes
Dry To Recoat: At any stage after flash off.
Fully Cured: 45 minutes



Surface Preparation


Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.



Application Methods


Technical Data
Compliant Spray Gun Pressure Pot
Mixing Ratio: Base: 1 Base: 1
Thinner: 1 Thinner: 1
Thinner Options: Thinner 2641 Thinner 2641
Thinner 2642 Thinner 2642
Viscosity: 30 - 35 seconds B4 cup 30 - 35 seconds B4 cup
Spray Gun Setup: 1.4 - 1.8 1.2 - 1.4
Number Of Coats (Guide Only): 2 - 4 full coats 2 - 4 full coats
Flash Off: 10 minutes 10 minutes



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Product Notes


Information on basic physical and chemical properties
Form: Liquid
Colour: Fluorescent Colours
Odour: Characteristic
Odour Threshold: Not determined
pH-value: Not determined
Change in Condition
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 82°C
Flash Point: 4°C
Flammability (solid, gas): Not applicable
Ignition temperature: 270°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.1 Vol %
Explosion limits: Upper: 7.1 Vol %
Vapour pressure at 20°C: 29 hPa
Density at 20°C: 1.049 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: 300 mPas
Viscosity: Kinematic: Not determined
Solvent content: Organic solvents: 48.2%
Solids content: 50.4%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
4377-736710

Data sheet

Manufacturer
HMG Paints Limited
For Use By
Professional Use
Water / Solvent Based
Solvent
Application Method
Aerosol, Spray, Pressure Pot
Sheen
Matt
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L, 5L
Key Features
Quick Drying. Three Coat System.
Touch Dry (at 20°C)
10 Minutes
Dry to Recoat (at 20°C)
At any stage after flash off.
Fully Cured (at 20°C)
45 Minutes
Coverage
20 square metres per litre @ 20 microns dft
Recommended Thinner/Cleaner
Thinner 2641/2642
Density
1.049 g/cm³
Solids by Volume
48.2 %
Heat Resistance (up-to)
Up to 80 °C
VOC
0.70 Kg/l
Recommended Dry Film Thickness
20 μm
Recommended Wet Film Thickness
50 μm
Base Type
Solvent-Based
Finish
Matt
Application Method
Spray
Application Method
Aerosol
Components
1K
Product Usage Type
Topcoat
Product Range
Cellulose
Colour Family
Pink
Colour Family
Orange
Colour Family
Yellow
Colour Family
Green
Colour Family
Blue
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Cellulose Fluorescent is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT



COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like
HMG Acrythane 4G Clearcoat

HMG Acrythane 4G Clearcoat

HMG Acrythane 4G Clearcoat (Base) is a high solids acrylic polyurethane coating to meet the stringent requirements of the commercial vehicle market. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane 4G Clearcoat...

Price £119.36 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Cellulose APS Primer

HMG Cellulose APS Primer

HMG Cellulose APS Primer is a quick drying cellulose primer for use in aerosols, classic car refinish and industrial applications. Available in grey or white Also available as an aerosol, please see HMG Cellulose APS Primer Aerosol Order a Colour Sample

Price £23.38 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2641 | Solvent & Thinner

HMG Thinner 2641

HMG Thinner 2641 is a medium fast thinner. Designed for use with cellulose based systems.

Price £14.15 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2642 | Solvent & Thinner

HMG Thinner 2642

HMG Thinner 2642 is a medium slow thinner which can be used with compatible HMG systems. For use with cellulose based systems.

Price £50.17 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Cellulose Fluorescent Aerosol | Fast Drying Aerosol

HMG Cellulose Fluorescent Aerosol

HMG Cellulose Fluorescent Aerosol is a high quality fluorescent cellulose aerosol product for automotive and industrial use. This product is also available in non-aerosol form, please see HMG Cellulose Fluorescent. HMG Cellulose Fluorescent Aerosol is part two of a three coat system: 3 Coat System Details Coat 1 HMG Cellulose...

Price £32.75 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery