- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Flexithane is a highly flexible polyurethane semi-gloss coating with excellent adhesion properties on difficult substrates such as PVC, PU elastomer, rubber variants, fabrics, leather.
- Elastomeric with excellent adhesion to flexible substrates
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Flexithane is a highly flexible polyurethane semi-gloss coating with excellent adhesion properties on difficult substrates such as PVC, PU elastomer, rubber variants, fabrics, leather.
Flexithane can be cross-linked with isocyanate HMG Hardener 9002, (using 10% by volume of hardener before thinning). The hardener is supplied separately and added immediately prior to using the paint. The pot life once the hardener is added is 8 hours.
Flexithane is supplied as a semi-gloss finish only.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Elastomeric with excellent adhesion to flexible substrates
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Product Specification
| Technical Data | |
|---|---|
| Volume Solids: | 56.0% |
| VOC Content: | 0.8kgs/ltr |
| SG: | - |
| Viscosity: | - |
| Density: | - |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | 4°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| HVLP: | 15 μm | 50 μm | |
| Gravity Gun: | 15 μm | 50 μm | |
| Roller: | 15 μm | 50 μm | |
| Brush: | 15 μm | 50 μm | |
Coverage: 20 square metres per litre @ 15 microns dft (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 5 minutes |
| Dry To Handle: | 20 minutes |
| Dry To Recoat: | At any stage of dry. |
| Fully Cured: | 1 hour |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| HVLP | Gravity Gun | ||||
| Mixing Ratio: | Base: 1 | Base: 1 | |||
| Thinner: 15% approx | Thinner: 15% approx | ||||
| Thinner Options: | Thinner 2681 | Thinner 2681 | |||
| - | - | ||||
| Viscosity: | - | - | |||
| Spray Gun Setup: | - | - | |||
| Number Of Coats (Guide Only): | 2 full coats | 2 full coats | |||
| Flash Off: | 10 minutes | 10 minutes | |||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Liquid |
| Colour: | According to product specification |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value: | Not determined |
| Change in Condition | |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 82°C |
| Flash Point: | 4°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | 425°C |
| Decomposition temperature: | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 1.2 Vol % |
| Explosion limits: Upper: | 12.0 Vol % |
| Vapour pressure at 20°C: | 43 hPa |
| Density at 20°C: | Not determined |
| Relative density: | Not determined |
| Vapour density: | Not determined |
| Evaporation rate: | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | Not determined |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 56.0% |
| Solids content: | - |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Product Details
4384-852624
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- PVC, PU Elastomer, Rubber Variants, Fabrics, Leather
- Application Method
- Gravity Gun, Spray, Brush, Roller
- Sheen
- Semi-Gloss
- Colour
- Clear, Standard / Ready Mixed, Fully Tintable
- Pack Size
- 1L, 5L
- Mixing Ratio
- HVLP- Base: 1 - Thinner 15% approx
- Mixing Ratio
- Gravity Gun: Base: 1 - Thinner 15% approx
- Suitable Substrates
- PVC, PU elastomer, rubber variants, fabrics, leather.
- Key Features
- Elastomeric with excellent adhesion to flexible substrates.
- Touch Dry (at 20°C)
- 5 Minutes
- Dry to Handle (at 20°C)
- 20 Minutes
- Dry to Recoat (at 20°C)
- At any stage of dry.
- Fully Cured (at 20°C)
- 1 Hour
- Solids by Volume
- 56.0 %
- VOC
- 0.8kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 1L and 5L
- Recommended Dry Film Thickness
- 15 μm
- Recommended Wet Film Thickness
- 50 μm
- UN Number
- UN1263
- Suitable For Use On
- PVC
- Suitable For Use On
- Rubber
- Suitable For Use On
- Fabric
- Suitable For Use On
- Leather
- Suitable For Use On
- PU Elastomer
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
Questions
Question about the product
Gareth
on
2021-06-19 20:45:41
| Question:
Would this paint be suitable to use on the tubes of am inflatable Rib boat? The material is Hypalon |
Answer from Rawlins’ Technical Team:
Assuming the rib tubes are clean, dry, sound and prepared as detailed in the Technical data sheet we can recommend Technispray Hypakolor for this specific application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Flexithane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG Thinner 2681
HMG Thinner 2671 is a thinner designed for using compatible HMG Flexithane. Specially formulated for use in Flexithane.
Price
£50.65
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9002
HMG Hardener 9002 is a 2k isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Superthane HMG Supersheen Thinner (Part 2) HMG Hardener 9002 Part two of a two-pack system Professional...
Price
£12.17
(incl. VAT)
In Stock and Available for Delivery