Follow us on:

HMG Stoving Enamel | High Performance | 400+ colours available
HMG Stoving Enamel | High Performance | 400+ colours available

HMG Stoving Enamel

TOPSTV
HMG4394

HMG Stoving Enamel  is a high performance, rapid curing, high build, general purpose stoving enamel. Stoving paints are for force-drying; for painting stoves, see our heat-resistant paints

  • Combines excellent colour and gloss retention together with good physical properties.
  • Suitable for most domestic and industrial applications.
  • Offers fast production turn around combined with economy and good technical properties.
  • Ease of use.
  • Good term durability.
  • Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£27.86(incl. VAT)
£23.22(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

questions 4 questions about the product
Description

HMG Stoving Enamel is a high performance, rapid curing, high build, general purpose stoving enamel.



Click To Jump To Section:




Features & Benefits


  • Combines excellent colour and gloss retention together with good physical properties.
  • Suitable for most domestic and industrial applications.
  • Offers fast production turn around combined with economy and good technical properties.
  • Ease of use.
  • Good term durability.



Product Specification


Technical Data
Volume Solids: 50.6%
VOC Content: 0.5 Kg/l
SG: -
Viscosity: 150 mPas
Density: 0.982 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Flash Point: 4°C



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Compliant Spray Gun: 25 μm 50 μm
Pressure Pot: 25 μm 50 μm



Coverage: 20 square metres per litre @ 25 microns dft

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 120°C
Fully Cured: 30 minutes



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.



Application Methods


Technical Data
Gravity Gun HVLP
Mixing Ratio: Base: 1 Base: 1
Thinner: >20% Thinner: >20%
Thinner Options: Thinner 2691 Thinner 2691
- -
Viscosity: 25 - 35 seconds B4 cup 25 - 35 seconds B4 cup
Spray Gun Setup: 1.6 - 1.8 1.2 - 1.4
Number Of Coats (Guide Only): 1 - 2 full coats 1 - 2 full coats
Flash Off: 15 minutes 15 minutes



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Stoving Schedule


  • This product must be 'Stoved' after application
  • The ovens should always be at specified temperature before use

HMG Stoving Enamel:

  • 30mins @ 120°C metal temperature



Product Notes


Information on basic physical and chemical properties
Form: Liquid
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value: Not determined
Change in Condition
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 108°C
Flash Point: 4°C
Flammability (solid, gas): Not applicable
Ignition temperature: 500°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.1 Vol %
Explosion limits: Upper: 7 Vol %
Vapour pressure at 20°C: 6.7 hPa
Density at 20°C: 0.982 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: 150 mPas
Viscosity: Kinematic: Not determined
Solvent content: Organic solvents: 50.0%
Solids content: 50.6%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
4394-832458

Data sheet

Manufacturer
HMG Paints Limited
Water / Solvent Based
Solvent
Application Method
HVLP
Gravity Gun
Sheen
Gloss
Matt
Satin
Semi Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
1L
2.5L
5L
Mixing Ratio
Base 1 - Thinner up to 30%
Key Features
Combines excellent colour and gloss retention together with good physical properties. Suitable for most domestic and industrial applications.
Fully Cured (at 20°C)
30 Minutes
Coverage
20 square metres per litre @ 25 microns dft (Theoretical)
Recommended Thinner/Cleaner
Thinner 2691
Density
0.982 g/cm³
Solids by Volume
50.6 %
VOC
0.5 Kg/l
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
Recommended Dry Film Thickness
25 μm
Recommended Wet Film Thickness
50 μm
UN Number
UN1263
Finish
Matt
Finish
Satin
Finish
Gloss
Finish
Semi-Gloss
Application Method
Spray
Application Method
HVLP
Product Usage Type
Topcoat
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
Clear
Colour Family
White
Colour Family
Neutral
Colour Family
Metallic
Colour Family
Anthracite Grey
Colour Family
Stone
Colour Family
Beige
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions jenkyn knill on 2023-03-09 13:10:32
Question: 

Can this product be applied by brush or is it spray application only?

Answer from Rawlins’ Technical Team:

This product is suitable for spray application only.

questions Don Kiddick on 2022-10-31 19:22:47
Question: 

What temperature level can this paint can resist?

Answer from Rawlins’ Technical Team:

This product can resist upto 160°C.

questions Jayne Phelps on 2022-09-08 07:40:17
Question: 

Have you a paint that is suitable for repainting /spraying Aga type cooker ? On site Kings regards Jayne Phelps

Answer from Rawlins’ Technical Team:

No, unfortunately we do not have a product we can recommend for this application.

questions Nikki Parsler on 2022-09-06 10:18:46
Question: 

Can I use this to paint front of wood fired rayburn?

Answer from Rawlins’ Technical Team:

Unfortunately no, we do not have a product to recommend for this application.

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Stoving Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT



COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like
HMG Thinner 2691 | Solvent & Thinner

HMG Thinner 2691

HMG Thinner 2691 is a thinner for use in various applications. For use with compatible HMG systems.

Price £13.30 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery