- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Stoving Enamel Hammer Finish is a high performance, rapid curing, high build, general purpose stoving enamel with a textured, hammer finish.
- Combines excellent colour and gloss retention together with good physical properties
- Suitable for most domestic and industrial applications
- Offers fast production turn around combined with economy and good technical properties
- Available in a wide range of colours with an attractive hammer finish
- For the gloss finish, tintable version of this product, please see HMG Stoving Enamel
- Stoving paints are for force-drying; for painting stoves, see our heat-resistant paints
HMG Stoving Enamel Hammer Finish is a high performance, rapid curing, high build, general purpose stoving enamel in a hammer finish. It combines excellent colour and gloss retention together with good physical properties.
HMG Stoving Enamel Hammer Finish is suitable for most domestic and industrial applications where it offers fast production turn around combined with economy and good technical properties.
For the gloss finish, tintable version of this product, please see HMG Stoving Enamel.
Click To Jump To Section:
- Features & Benefits
- Film Thickness Range And Coverage
- Surface Preparation
- Application Methods
- Stoving Schedule
- Important Instructions Before Use
- Health & Safety
Features & Benefits
- Easy to use
- Offers good long term durability
- Fast Drying - Fully Cured in 30 minutes @120°C
- Temperature resistant up to 160°C
- Available in a wide colour range
- For spray application on metal surfaces
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Compliant Spray Gun: | 25 μm | 50 μm | |
Pressure Pot: | 25 μm | 50 μm |
Coverage: 20 square metres per litre @ 25 microns dft
- HMG Technical Data Sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness
- These values are a guide only and are not to be used as specifications
- Film thickness will vary depending on actual use and specification
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Compliant Spray Gun | Pressure Pot | ||||
Mixing Ratio: | Base: 1 | Base: 1 | |||
Thinner: >20% | Thinner: >20% | ||||
Thinner Options: | Thinner 2691 | Thinner 2691 | |||
- | - | ||||
Viscosity: | 25 - 35 seconds B4 cup | 25 - 35 seconds B4 cup | |||
Spray Gun Setup: | 1.6 - 1.8 | 1.2 - 1.4 | |||
Number Of Coats (Guide Only): | 1 - 2 full coats | 1 - 2 full coats | |||
Flash Off: | 15 minutes @20°C | 15 minutes @20°C |
For further information on mixing ratios please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected].
Stoving Schedule
- This product must be 'Stoved' after application
- The ovens should always be at specified temperature before use
HMG Stoving Enamel Hammer Finish:
- 30mins @ 120°C metal temperature
Important Instructions Before Use
- Read and follow SDS, TDS and label instructions
- Stir all paints thoroughly before use
- Always use the same batch number on the same job
- Check colour and sheen prior to application
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
- If in any doubt, please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Health & Safety
- Refer to the Safety Data Sheets in the attachments section above and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Metal
- Sheen
- Hammered
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L, 5L
- Application
- Spray
- Coverage
- 20 square metres per litre @25 microns dft
- Density
- 0.982 g/cm³
- Solids by Volume
- 50.6 %
- Heat Resistance (up-to)
- 160°C
- VOC
- 0.5 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
Store between 5°C - 25°C. When not in use, cans must be kept sealed. - Recommended Dry Film Thickness
- 25 μm
- Recommended Wet Film Thickness
- 50 μm
- UN Number
- UN1263
- Fully Cured
- 30 Minutes @120°C
- Flashpoint
- 4°C
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Finish
- Hammered
- Application Method
- Spray
- Manufacturer
- HMG Paints LTD
- Product Usage Type
- Topcoat
- Colour Family
- Black
- Colour Family
- Metallic
- Colour Family
- Gold
- Colour Family
- Copper
- Colour Family
- Bronze
- Colour Family
- Stone
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Orange
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Stoving Enamel Hammer Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2691
HMG Thinner 2691 is a thinner for use in various applications. For use with compatible HMG systems.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...