- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Waterborne LMP Colours is a high quality 1K water-based acrylic based paint range offering excellent drying characteristics.
- Excellent adhesion to a wide variety of substrates and ease of brushability.
- Developed as an alternative to solvent based alkyd synthetic enamels for situations where its particular properties are preferred.
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Waterborne LMP Colours is a high quality 1K water-based acrylic based paint range offering excellent drying characteristics. Available in 400+ RAL and British Standard colours.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Excellent adhesion to a wide variety of substrates and ease of brushability.
- Developed as an alternative to solvent based alkyd synthetic enamels for situations where its particular properties are preferred.
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Not suitable for exterior use.
Product Specification
| Technical Data | |
|---|---|
| Volume Solids: | 48.7% |
| VOC Content: | 0.11 Kg/l |
| SG: | - |
| Viscosity: | 1500 mPas |
| Density: | 1.227 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | 101°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Brush: | 30 μm | 80 μm | |
| Roller: | 30 μm | 80 μm | |
| Compliant Spray: | 30 μm | 80 μm | |
Coverage: 12 square metres per litre at 30 microns dft (theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 30 minutes |
| Dry To Recoat: | 16 hours minimum - 14 days maximum |
| Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Brush | Roller | Compliant Spray | |||
| Mixing Ratio: | Ready for use | Ready for use | Base: 5 ltr | ||
| - | - | Thinner: >10% | |||
| Thinner Options: | - | - | Water | ||
| - | - | - | |||
| Viscosity: | As supplied | As supplied | As supplied | ||
| Spray Gun Setup: | - | - | - | ||
| Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | 1 - 2 coats | ||
| Flash Off: | - | - | - | ||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Liquid |
| Colour: | According to product specification |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value 20°C: | 8 |
| Change in Condition | |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 100°C |
| Flash Point: | 101°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | 370°C |
| Decomposition temperature: | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 2.6 Vol % |
| Explosion limits: Upper: | 12.6 Vol % |
| Vapour pressure at 20°C: | 23 hPa |
| Density at 20°C: | 1.227 g/cm³ |
| Relative density: | Not determined |
| Vapour density: | Not determined |
| Evaporation rate: | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | 1500 mPas |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 13.5% |
| Solids content: | 48.7% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Product Details
4398-828907
Data sheet
- Manufacturer
- HMG Paints Limited
- Interior / Exterior Use
- Interior Use
- Sheen
- Matt
Satin
Gloss - Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L
20L - Base Type
- Water based
- Interior/Exterior Use
- Interior Only
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 30 Minutes
- Dry to Recoat (at 20°C)
- 16 hrs minimum - 14 days maximum
- Fully Cured (at 20°C)
- 24 Hours
- Coverage
- 12 square metres per litre @ 30 microns dft (Theoretical)
- Density
- 1.227 g/cm³
- Solids by Volume
- 48.7 %
- VOC
- 0.11 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 1L, 2.5L, 5L and 20L
- Recommended Dry Film Thickness
- 30 μm
- Recommended Wet Film Thickness
- 80 μm
- UN Number
- Not regulated
- Base Type
- Water-Based
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Waterborne
- Type of Wood Finish
- Wood Paint
- Suitable For
- Walls & Ceilings
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
Questions
Question about the product
Sally dowling
on
2021-01-20 11:10:40
| Question:
I’m looking for high quality paint to brush/roll onto kitchen cabinets, would this be the best option for durability? |
Answer from Rawlins’ Technical Team:
Assuming the kitchen cabinets are clean, dry, sound and prepared as detailed in the Technical Data sheet this paint can be applied to kitchen cabinets. Please be aware this should not be used for application to worktops. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Waterborne LMP Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT