Follow us on:

HMG Acid Cat MB Colours
HMG Acid Cat MB Colours

HMG Acid Cat MB Colours

TOPMB
HMG4400

HMG Acid Cat MB Colours (Base) is a high solids, two-pack compliant system designed for application onto wood substrates offering fast drying and excellent colour retention.

  • Now supplied as a composite two-pack system including Base and Hardener
  • Available in 3,500 colours from RAL, NCS, and British Standard

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£26.26(incl. VAT)
£21.88(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG Acid Cat MB Colours is a high solids, compliant system designed for application onto wood substrates offering fast drying and excellent colour retention.

Please note: Now supplied as a composite two-pack system including Base and Hardener.



Click To Jump To Section:




Features & Benefits


  • Two-pack system
  • Available in 3,500 colours from RAL, NCS, and British Standard
  • For interior use only



Product Specification


Technical Data
Volume Solids: 52.3%
VOC Content: 0.50kgs/ltr
SG: -
Viscosity: -
Density: 1.004 g/cm³
Storage Conditions: Store between 5°C - 25°C.  When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Flash Point: 24°C



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Compliant Spray Gun: 27 μm 70 μm
Roller: 25 μm 70 μm



Coverage: 10-12 square metres per litre @ 25 microns dft (Theoretical)

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 20°C
Touch Dry: 30 minutes
Dry To Recoat: 30 minutes minimum - 6 hours maximum
Fully Cured: 24 hours



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Application Methods


Technical Data
Compliant Spray Gun Roller
Mixing Ratio: Base: 9 Base: 9
Activator: 1 Activator: 1
Hardener Options: Acid Cat 91 Hardener Acid Cat 91 Hardener
- -
Viscosity: 30 - 35 seconds B4 cup 30 - 35 seconds B4 cup
Spray Gun Setup: 1.4 - 1.8 1.2 - 1.4
Number Of Coats (Guide Only): 2 - 3 coats 2 - 3 coats
Flash Off: 15 minutes between coats 15 minutes between coats



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Product Notes


Information on basic physical and chemical properties
Form: Liquid
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value 20°C: Not determined
Change in Condition
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 78°C
Flash Point: 24°C
Flammability (solid, gas): Not applicable
Ignition temperature: 315°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.0 Vol %
Explosion limits: Upper: 7.0 Vol %
Vapour pressure at 20°C: 6.7 hPa
Density at 20°C: 1.004 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: 1500 mPas
Viscosity: Kinematic: 26 s (DIN 53211/4)
Solvent content: Organic solvents: 47.7%
Solids content: 52.3%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
4400-828898

Data sheet

Manufacturer
HMG Paints Limited
Interior / Exterior Use
Interior Use
Water / Solvent Based
Solvent
For Use On
Wood
Application Method
Spray, Pressure Pot
Sheen
Matt
Satin
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Two-Pack
Pack Size
1L
5L
20L
Mixing Ratio
Base: 9 - Activator: 1
Touch Dry (at 20°C)
30 Minutes
Dry to Recoat (at 20°C)
30 minutes minimum - 6 hours maximum
Fully Cured (at 20°C)
24 Hours
Coverage
10-12 square metres per litre @ 25 microns dft
Density
1.004 g/cm³
Solids by Volume
52.3 %
VOC
0.50kgs/ltr
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
Recommended Dry Film Thickness
27 μm
Recommended Wet Film Thickness
70 μm
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Wood
Finish
Matt
Finish
Satin
Finish
Gloss
Application Method
Spray
Application Method
Pressure Pot
Product Usage Type
Topcoat
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
White
Colour Family
Neutral
Colour Family
Metallic
Colour Family
Stone
Colour Family
Anthracite Grey
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Acid Cat MB Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like