- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Acrythane SC601 Colours | ||||
| Activator (Part 2) | Option 1: HMG Hardener 9004 Standard | ||||
| Option 2: HMG Hardener 9027 Wintermix | |||||
- Part one of a two part system.
- Rapid drying
- High gloss
- Simplicity of use
- Excellent protection against harsh weather conditions and atmospheric pollution
- Available in 3,500 colours from RAL, NCS, and British Standard
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Acrythane SC601 Colours is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9004 Standard or HMG Hardener 9027 Wintermix.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Available in 3,500 colours from RAL, NCS, and British Standard
- Rapid drying
- High gloss
- Simplicity of use
- Excellent protection against harsh weather conditions and atmospheric pollution.
Product Specification
| Technical Data | ||||
|---|---|---|---|---|
| Volume Solids: | 55.4% | |||
| VOC Content: | 0.5kgs/ltr | |||
| SG: | - | |||
| Viscosity: | 350 mPas | |||
| Density: | 1.021 g/cm³ | |||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||
| Shelf Life: | 12 months from delivery date in original sealed containers. | |||
| Pot Life: | 1 - 2 hours at 20°C | |||
| Flash Point: | 23°C | |||
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Pressure Pot: | 40 μm | 80 μm | |
| Compliant Spray Gun: | 40 μm | 80 μm | |
Coverage: 11 square metres per litre at 25 microns dft mixed (Theoretical).
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 30 minutes |
| Dry To Handle: | 6 - 8 hours |
| Dry To Recoat: | After through curing (8 hours at20°C / 30 minutes at 70°C) denib with p500g dry. After baking allow to cool before flatting and recoating. |
| Fully Cured: | 5 - 7 days |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Compliant Spray Gun | Pressure Pot | ||||
| Mixing Ratio: | Base: 2 | Base: 2 | |||
| Hardener: 1 | Hardener: 1 | ||||
| Thinner: 0.5 | Thinner: 0.5 | ||||
| Hardener Options: | Hardener 9004 Standard | Hardener 9004 Standard | |||
| Hardener 9027 Wintermix | Hardener 9027 Wintermix | ||||
| Thinner Options: | Thinner 2600 | Thinner 2600 | |||
| Thinner 2601 | Thinner 2601 | ||||
| Thinner 2602 | Thinner 2602 | ||||
| Thinner 2603 | Thinner 2603 | ||||
| Thinner 2604 | Thinner 2604 | ||||
| Viscosity: | 21 - 26 seconds B4 cup | 21 - 26 seconds B4 cup | |||
| Spray Gun Setup: | 1.6 - 1.8 | 1.1 - 1.4 | |||
| Number Of Coats (Guide Only): | 1 medium + 1 full | 1 medium + 1 full | |||
| Flash Off: | - | - | |||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information on basic physical and chemical properties | ||||
|---|---|---|---|---|
| Form: | Liquid | |||
| Colour: | According to product specification | |||
| Odour: | Characteristic | |||
| Odour Threshold: | Not determined | |||
| pH-value 20°C: | Not determined | |||
| Change in Condition | ||||
| Melting point/freezing point: | Undetermined | |||
| Initial boiling point and boiling range: | 124°C | |||
| Flash Point: | 24°C | |||
| Flammability (solid, gas): | Not applicable | |||
| Ignition temperature: | 315°C | |||
| Decomposition temperature: | Not determined | |||
| Auto-ignition temperature: | Product is not selfigniting | |||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||
| Explosion limits: Lower: | 1.2 Vol % | |||
| Explosion limits: Upper: | 10.8 Vol % | |||
| Vapour pressure at 20°C: | 11.2 hPa | |||
| Density at 20°C: | 1.021 g/cm³ | |||
| Relative density: | Not determined | |||
| Vapour density: | Not determined | |||
| Evaporation rate: | Not determined | |||
| Solubility in / Miscibility with water: | NOT MISCIBLE | |||
| Partition coefficient: n-octanol/water: | Not determined | |||
| Viscosity: Dynamic at 20°C: | 350 mPas | |||
| Viscosity: Kinematic: | Not determined | |||
| Solvent content: Organic solvents: | 44.6% | |||
| Solids content: | 55.4% | |||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
Product Details
4404-829895
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Metal
- Application Method
- Spray
- Sheen
- Matt
Satin
Gloss
Semi-Gloss - Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L
5L - Mixing Ratio
- Base: 2 - Hardener: 1 - Thinner: 0.5
- Application
- Spray
- Touch Dry (at 20°C)
- 30 Mins
- Dry to Handle (at 20°C)
- 6 - 8 Hours
- Dry to Recoat (at 20°C)
- After through curing (8hrs@20C / 30mins@70C) denib with p500g dry. After baking allow to cool before flatting and recoating.
- Fully Cured (at 20°C)
- 5 - 7 Days
- Pot Life (at 20°C)
- 1 - 2 Hours
- Coverage
- 11 square metres per litre @ 25 microns dft mixed
- Recommended Thinner/Cleaner
- Thinner 2600/2601/2602/2603/2604
- Compatible Topcoats
- Polykote 2K AMC4 Primer, Polykote 2K MPS 4+1 Primer, Polykote HS Rapidbuild 2K Primer
- Density
- 1.021 g/cm³
- Solids by Volume
- 55.4 %
- Finish
- Matt
Satin
Gloss - Size
- 1L and 5L
- Recommended Dry Film Thickness
- 40 μm
- Recommended Wet Film Thickness
- 80 μm
- UN Number
- 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Finish
- Satin
- Finish
- High Gloss
- Application Method
- Spray
- Usages
- Atmospheric Polution Resistance
- Usages
- High Solids
- Usages
- Atmospheric
- Usages
- Weather Resistance
- Product Usage Type
- Topcoat
- Product Range
- Acrythane
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 30 mins
- Resistance to
- Atmospheric Polution
- Resistance to
- Weather
Questions
Question about the product
Mark
on
2022-06-20 10:42:43
| Question:
Can you supply the mixing details for SC601 in percentage weights? Your details are unclear as volume and weight ratios can be vastly different. Thank you Mark |
Answer from Rawlins’ Technical Team:
HMG only supply the mixing ratios by volume. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Acrythane SC601 Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Thinner 2600
HMG Thinner 2600 is a very fast thinner. For use in recommended HMG systems.
Price
£48.01
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.
Price
£14.09
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
Price
£14.15
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2603
HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.
Price
£48.01
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2604
HMG Thinner 2604 is a slow thinner. For use with compatible HMG systems.
Price
£14.78
(incl. VAT)
In Stock and Available for Delivery
HMG 2K Accelerator
HMG 2K Accelerator is a hardener designed to speed up drying times. For use with HMG Acrythane systems.
Price
£40.00
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9027 Wintermix
HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) Option 1: HMG Acrythane SC601 Colours Option 2: HMG Polykote 2K AMC Primer Option 3: HMG...
Price
£25.63
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
Price
£31.16
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery