- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Nisocoat 2 (Base) is a 2K non-isocyanate acrylic product formulated to provide a tough, chemically resistant, high quality coating.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
| 2-Pack System Details | |||
|---|---|---|---|
| Base (Part 1) | HMG Nisocoat 2 | ||
| Hardener (Part 2) | HMG Hardener 9061 | ||
- Available in 5,000+ colours from RAL, NCS, and British Standard
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Nisocoat 2 is a 2K non-isocyanate acrylic product formulated to provide a tough, chemically resistant, high quality coating.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9061
Click To Jump To Section:
- Features & Benefits
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Health & Safety
Features & Benefits
- Fast-drying - touch dry in 15 minutes @20°c
- Excellent finish straight from the spray gun
- Part one of a two part system
- Available in four finishes - (Gloss: 90%, SemiGloss: 60%, SemiMatt: 20%, Matt: 10%)
- Available in 5,000+ colours from RAL, NCS, and British Standard
Recommended for use with the following HMG Primer/Filler/Sealer systems:
Film Thickness Range And Coverage
Coverage: 15 square metres per litre at 30 microns assuming 100% transfer efficiency (Theoretical).
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Compliant Spray Gun: | 23 - 35 μm | 70 - 80 μm | |
| Pressure Pot: | 23 - 35 μm | 70 - 80 μm | |
| Airless/Air-Assisted: | 23 - 35 μm | 70 - 80 μm | |
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 15 mins @ 20°c |
| Hard Dry: | 4 hours @ 20°c |
| Full Dry: | 7 days @ 20°c |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Product Details
4407-1036594
Data sheet
- Manufacturer
- HMG Paints Limited
- Application Method
- Spray
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.5L
5L - Mixing Ratio
- Refer to data sheet
- Suitable Substrates
- Metal, UPVC and certain Timbre
- Touch Dry (at 20°C)
- 15 Mins
- Dry to Handle (at 20°C)
- 8 Hours
- Fully Cured (at 20°C)
- 7 Days
- Pot Life (at 20°C)
- 8 Hours
- Coverage
- 15 square metres per litre @ 30 microns assuming 100% transfer efficiency
- Recommended Thinner/Cleaner
- Thinner 2691/2602/2711
- Density
- 1.172 g/cm³
- Solids by Volume
- 56.1 %
- VOC
- 0.565Kg/L
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt
Semi-Matt
Semi-Gloss
Gloss - Size
- 1l
2.5L
5L - Recommended Dry Film Thickness
- 23 - 35 μm
- Recommended Wet Film Thickness
- 70 - 80 μm
- Flashpoint
- 24°C
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Semi-Gloss
- Finish
- Gloss
- Finish
- Semi-Matt
- Finish
- Matt
- Application Method
- Spray
- Manufacturer
- HMG Paints LTD
- Usages
- Isocyanate Free/Non-Isocyanate
- Usages
- Chemical Resistance
- Usages
- Tough/Durable
- Usages
- Atmospheric
- Product Usage Type
- Topcoat
- Product Range
- Nisocoat
- Colour Family
- White
- Colour Family
- Brown
- Colour Family
- Metallic
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Clear
- Colour Family
- Red
- Colour Family
- Neutral
- Colour Family
- Pink
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- Blue
- Non - Isocyanate
- Isocyanate Free/Non-Isocyanate
- Product Type
- Acrylic
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 15 mins
- Product Attributes
- Tough / Durable
- Resistance to
- Chemicals
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Nisocoat 2 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Speedbuild 3 Primer
HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner: 2-Pack System Details Base (Part 1) HMG Speedbuild 3 Primer Thinner (Part 2) HMG Thinner 2601 HMG Thinner 2602 HMG...
Price
£69.32
(incl. VAT)
In Stock and Available for Delivery
HMG Epiprime
HMG Epiprime is a zinc phosphate 2K epoxy primer offering excellent adhesion. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Epiprime Activator (Part 2) Option 1: HMG Hardener 9058 Standard Option 2: HMG Hardener...
Price
£23.46
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
Price
£14.15
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2691
HMG Thinner 2691 is a thinner for use in various applications. For use with compatible HMG systems.
Price
£13.30
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2711
HMG Thinner 2711 is a low odour thinner recommended for use in certain HMG systems. Suitable for various HMG systems.
Price
£47.78
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9061
HMG Hardener 9061 is a 2k polyamide hardener for use in recommended HMG systems. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Nisocoat 2 Hardener (Part 2) HMG Hardener 9061 Part two of a two part pack....
Price
£30.95
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery