Follow us on:

HMG Superthane | Available in 400+ colours
HMG Superthane | Available in 400+ colours

HMG Superthane

TOPSUP
HMG4412

HMG Superthane is a 2K high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties.

This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:

2-Pack System Details
Base (Part 1) HMG Superthane
Hardener (Part 2) HMG Hardener 9002

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

  • Part one of a two-pack system
  • Suitable for anti-graffiti use
  • Available in 3,500 colours from RAL, NCS, and British Standard

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£53.05(incl. VAT)
£44.21(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG Superthane is a 2K, high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties.

Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9002.



Click To Jump To Section:




Features & Benefits


  • Part on of a two-part system.
  • Suitable for anti-graffiti use.
  • Available in 3,500 colours from RAL, NCS, and British Standard



Product Specification


Technical Data
HMG Superthane Clear HMG Superthane Colours HMG Superthane Colours (Contains Lead)
Volume Solids: 45.3% 59.3% 56.2%
VOC Content: 0.46 Kg/l 0.46 Kg/l 0.46 Kg/l
SG: - - -
Viscosity: 220 mPas 200 mPas 200 mPas
Density: 1.039 g/cm³ 1:.252 g/cm³ 1.233 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed. Store between 5°C - 25°C. When not in use, cans must be kept sealed. Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers. 12 months from delivery date in original sealed containers. 12 months from delivery date in original sealed containers.
Pot Life: 4 hours @ 20°C 4 hours @ 20°C 4 hours @ 20°C
Flash Point: 24°C 25°C 24°C



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Roller: 40 μm 60 μm
Compliant Spray: 35 μm 60 μm
Pressure Pot: 35 μm 60 μm
Airless/Air-Assisted: 35 μm 60 μm



Coverage: 8 square metres per litre @ 40 microns dft.

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 20°C
Touch Dry: 2 - 4 hours
Dry To Handle: 24 hours
Dry To Recoat: At any stage, flat down after 24 hours
Fully Cured: 5 days



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Application Methods


Technical Data
Roller Compliant Spray Pressuer Pot Airless/Air-Assisted
Mixing Ratio: Base: 2.25 Base: 2.25 Base: 2.25 Base: 2.25
Hardener: 1 Hardener: 1 Hardener: 1 Hardener: 1
- Thinner: To viscosity Thinner: To viscosity Thinner: To viscosity
Hardener Options: Hardener 9002 Hardener 9002 Hardener 9002 Hardener 9002
Thinner Options: Thinner 2601 Thinner 2601 Thinner 2601 Thinner 2601
Thinner 2603 Thinner 2603 Thinner 2603 Thinner 2603
Viscosity: 25 - 35 seconds B4 cup 25 - 35 seconds B4 cup 25 - 35 seconds B4 cup 25 - 35 seconds B4 cup
Spray Gun Setup: - - - -
Number Of Coats (Guide Only): 1 dust coat then 2 full coats 1 dust coat then 2 full coats 1 dust coat then 2 full coats 1 dust coat then 2 full coats
Flash Off: 30 minutes 30 minutes 30 minutes 30 minutes



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Product Notes


Information On Basic Physical And Chemical Properties
HMG Superthane Clear HMG Superthane Colours HMG Superthane Colours (Contains Lead)
Form: Liquid Liquid Liquid
Colour: White White White
Odour: Characteristic Characteristic Characteristic
Odour Threshold: Not determined Not determined Not determined
pH-value 20°C: Not determined Not determined Not determined
Melting point/freezing point: Undetermined Undetermined Undetermined
Initial boiling point and boiling range: 137°C 137°C 136°C
Flash Point: 24°C 25°C 24°C
Flammability (solid, gas): Not applicable Not applicable Not applicable
Ignition temperature: Product is not selfigniting. Product is not selfigniting. Product is not selfigniting.
Decomposition temperature: Not determined. Not determined. Not determined.
Auto-ignition temperature: 315°C 315°C 315°C
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible." "Product is not explosive. However, formation of explosive air vapour mixtures are possible." "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.1 Vol % 1.1 Vol % 1.5 Vol %
Explosion limits: Upper: 10.8 Vol % 10.8 Vol % 10.8 Vol %
Vapour pressure at 20°C: 6.7-8.2 hPa 6.7 hPa 3.4 hPa
Density at 20°C: 1.039 g/cm³ 1.252 g/cm³ 1.233 g/cm³
Relative density: Not determined Not determined Not determined
Vapour density: Not determined Not determined Not determined
Evaporation rate: Not determined Not determined Not determined
Solubility in / Miscibility with water: NOT MISCIBLE NOT MISCIBLE NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined Not determined Not determined
Viscosity: Dynamic at 20°C: 220 mPas 200 mPas 200 mPas
Viscosity: Kinematic: Not determined Not determined Not determined
Solvent content: Organic solvents: 54.7% 40.1% 43.8%
Solids content: 45.3% 59.3% 56.2%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
4412-829877

Data sheet

Manufacturer
HMG Paints Limited
Application Method
Roller, Spray
Sheen
Gloss
Colour
Fully Tintable
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Pack Size
1L
5L
Mixing Ratio
Base: 2.25 - Hardener: 1 - Thinner: To Viscosity
Key Features
Suitable for Anti-Graffiti use. Available in a wide colour range including RAL & BS shades.
Touch Dry (at 20°C)
2 - 4 Hours
Dry to Handle (at 20°C)
24 Hours
Dry to Recoat (at 20°C)
At any stage, flat down after 24 hours.
Fully Cured (at 20°C)
5 Days
Pot Life (at 20°C)
4 Hours
Compatible Primers
2K Etch Primer ST3000 - EPIPRIME - Polykote 2K AMC Primer
Density
HMG Superthane Clear: 1.039 g/cm³ - HMG Superthane Colours: 1.252 g/cm³ - HMG Superthane Colours (Contains Lead): 1.233 g/cm³
Solids by Volume
HMG Superthane Clear: 45.3 % - HMG Superthane Colours: 59.3 % - HMG Superthane Colours (Contains Lead): 56.2 %
Heat Resistance (up-to)
150ºC continuous - 200ºC for short periods
VOC
0.46 Kg/l
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers
Finish
Gloss
Size
1L and 5L
Recommended Dry Film Thickness
40 μm
Recommended Wet Film Thickness
60 μm
UN Number
1263
Base Type
Polyurethane
Finish
Gloss
Application Method
Roller
Application Method
Spray
Product Usage Type
Topcoat
Colour Family
White
Colour Family
Neutral
Colour Family
Metallic
Colour Family
Stone
Colour Family
Anthracite Grey
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
Clear
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Superthane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
HMG Thinner 2601 | Solvent & Thinner

HMG Thinner 2601

HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.

Price £14.09 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2603 | Solvent & Thinner

HMG Thinner 2603

HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.

Price £48.01 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Hardener 9002 | Hardeners & Activators

HMG Hardener 9002

HMG Hardener 9002 is a 2k isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Superthane HMG Supersheen Thinner (Part 2) HMG Hardener 9002 Part two of a two-pack system Professional...

Price £12.17 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery