- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Supersheen is a 2K polyurethane coating offering ultimate levels of: weathering, colour retention, solvent resistance, abrasion resistance, wide ranging chemical resistance.
Supplied as:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Supersheen - Base 3L | ||||
| Hardener (Part 2) | HMG Hardener 9002 - 1L | ||||
- Two-pack system
- Ease of use
- Good long term durability
- Anti-graffiti
- Available in 3,500 colours from RAL, NCS, and British Standard
- For a Full Gloss product, see HMG Superthane
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
HMG Supersheen is a 2K Polyurethane coating offering ultimate levels of: weathering, colour retention, solvent resistance, abrasion resistance, wide ranging chemical resistance.
Please note this product is suppled as a two-pack system consisting of 1 x 3L Supersheen Base and 1 x 1L HMG Hardener 9002.
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Part two of a two-pack system
- Ease of use
- Good long term durability
- Anti-graffiti
- Available in 3,500 colours from RAL, NCS, and British Standard
Supersheen offers the highest quality finish on ferrous and nonferrous metals, wood, concrete, asbestos, fibreglass etc, and finds use in applications such as ship superstructures, bridges, aircraft, high quality structural steelwork, food storage warehouses, abattoirs, hospital, all structures in chemical or abrasive environments, railway rolling stock, road tankers, high quality commercial vehicles, building facings. Protection of bright metal surfaces can also be carried out using clear supersheen.
Supersheen is finding increased popularity in refinishing in all the previously mentioned fields. In most cases all that is necessary on previously painted surfaces, is to flat down and apply either Uniblok Sealer or HMG Washfiller and then apply the Supersheen system in the normal recommended manner. Supersheen is a fairly slow drying system, being dust free in 2 4 hours; firm dry in 24 hours; fully cured in 5 days @ 20ºC.
It can be subjected to normal exposure to the atmosphere after reaching the firm dry stage, i.e. 24 hours after the application of the final coat, but must be allowed at least 5 days to cure when subjected to chemical or harsh abrasive conditions.
Product Specification
| Technical Data | ||||
|---|---|---|---|---|
| HMG Supersheen Colours | HMG Supersheen Colours (Contains Lead) | |||
| Volume Solids: | 58.7% | 56.0% | ||
| VOC Content: | 0.5kgs/ltr | 0.5kgs/ltr | ||
| SG: | - | - | ||
| Viscosity: | 300 mPas | 300 mPas | ||
| Density: | 1.244 g/cm³ | 1.217 g/cm³ | ||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | ||
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | ||
| Pot Life: | 4 - 6 hours at 20°C | 4 - 6 hours at 20°C | ||
| Flash Point: | - 4°C | - 9°C | ||
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Gravity Gun: | 40 μm | 80 μm | |
| Airless/Air-Assisted: | 35 μm | 80 μm | |
| Brush: | 35 μm | 80 μm | |
| Roller: | 35 μm | 80 μm | |
Coverage: 12.5 square metres per litre at 40 microns dft (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 2 - 4 hours |
| Dry To Handle: | 24 hours |
| Dry To Recoat: | At any stage, flat after 24hrs |
| Fully Cured: | 5 - 7 days |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the Safety Data Sheet, Product Data Sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Gravity Gun | Airless/Air-Assisted | Brush | Roller | ||
| Mixing Ratio: | Base: 3 pts | Base: 3 pts | Base: 3 pts | Base: 3 pts | |
| Hardener: 1 pts | Hardener: 1 pts | Hardener: 1 pts | Hardener: 1 pts | ||
| Hardener Options: | Hardener 9002 | Hardener 9002 | Hardener 9002 | Hardener 9002 | |
| Thinner Options: | Thinner 2601 | Thinner 2601 | Thinner 2602 | Thinner 2602 | |
| Thinner 2602 | Thinner 2602 | Thinner 2603 | Thinner 2603 | ||
| Thinner 2603 | Thinner 2603 | - | - | ||
| Viscosity: | 21 - 26 seconds DIN4 | 21 - 26 seconds DIN4 | - | - | |
| Spray Gun Setup: | 1.1 - 1.4 | 911 thou tip | - | - | |
| Number Of Coats (Guide Only): | 2 full coats | 2 full coats | 2 full coats | 2 full coats | |
| Flash Off: | 10 - 15 minutes | 10 - 15 minutes | 10 - 15 minutes | 10 - 15 minutes | |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||
|---|---|---|---|---|
| HMG Supersheen Colours | HMG Supersheen Colours (Contains Lead) | |||
| Form: | Liquid | Liquid | ||
| Colour: | White | White | ||
| Odour: | Characteristic | Characteristic | ||
| Odour Threshold: | Not determined | Not determined | ||
| pH-value 20°C: | Not determined | Not determined | ||
| Melting point/freezing point: | Undetermined | Undetermined | ||
| Initial boiling point and boiling range: | 137°C | 137°C | ||
| Flash Point: | 24°C | 25°C | ||
| Flammability (solid, gas): | Not applicable | Not applicable | ||
| Ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | ||
| Decomposition temperature: | Not determined. | Not determined. | ||
| Auto-ignition temperature: | 315°C | 315°C | ||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | ||
| Explosion limits: Lower: | 1.1 Vol % | 1.1 Vol % | ||
| Explosion limits: Upper: | 10.8 Vol % | 10.8 Vol % | ||
| Vapour pressure at 20°C: | 6.7-8.2 hPa | 6.7 hPa | ||
| Density at 20°C: | 1.039 g/cm³ | 1.252 g/cm³ | ||
| Relative density: | Not determined | Not determined | ||
| Vapour density: | Not determined | Not determined | ||
| Evaporation rate: | Not determined | Not determined | ||
| Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | ||
| Partition coefficient: n-octanol/water: | Not determined | Not determined | ||
| Viscosity: Dynamic at 20°C: | 220 mPas | 200 mPas | ||
| Viscosity: Kinematic: | Not determined | Not determined | ||
| Solvent content: Organic solvents: | 54.7% | 40.1% | ||
| Solids content: | 45.3% | 59.3% | ||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
Product Details
4413-829889
Data sheet
- Manufacturer
- HMG Paints Limited
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt
Satin
Semi-Gloss - Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4L
- Mixing Ratio
- Base: 3 pts - Hardener: 1 pts
- Suitable Substrates
- Metals, wood, concrete, asbestos and fibreglas
- Touch Dry (at 20°C)
- 4 hours
- Dry to Handle (at 20°C)
- 24 Hours
- Dry to Recoat (at 20°C)
- At any stage, flat after 24 hours
- Fully Cured (at 20°C)
- 5 - 7 Days
- Pot Life (at 20°C)
- 4 - 6 Hours
- Recommended Thinner/Cleaner
- Thinner 2601/2602/2603
- Density
- HMG Supersheen Colours: 1.244 g/cm³ - HMG Supersheen Colours (Contains Lead): 1.217 g/cm³
- Solids by Volume
- HMG Supersheen Colours: 58.7 % - HMG Supersheen Colours (Contains Lead): 56.0 %
- Heat Resistance (up-to)
- 200ºC for short periods / 150 ºC for continuous
- VOC
- 0.5kgs/ltr
- Finish
- Matt, Satin and Semi-Gloss
- Size
- 4L
- Recommended Dry Film Thickness
- 35 μm
- Recommended Wet Film Thickness
- 80 μm
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Tankers
- Suitable For Use On
- Aircraft
- Suitable For Use On
- Structural Steelwork
- Suitable For Use On
- Railway Rolling Stock
- Suitable For Use On
- Commerical Vehicles
- Suitable For Use On
- Building Facings
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Suitable For Use On
- Asbestos
- Suitable For Use On
- Ferrous Metals
- Suitable For Use On
- Non-Ferrous Metals
- Suitable For Use On
- Fibreglass
- Suitable For Use On
- Bridges
- Suitable For Use On
- Ships
- Finish
- Matt
- Finish
- Satin
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Colour Retention
- Usages
- Weather Resistance
- Usages
- Abrasion Resistant
- Usages
- Anti-Graffiti
- Usages
- Chemical Resistant
- Product Usage Type
- Topcoat
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Product Type
- Nitrocellulose
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 4 hours
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
- Product Attributes
- Easy to Clean
- Product Attributes
- Tough / Durable
- Product Attributes
- Non-Chalking
- Resistance to
- Weather
- Resistance to
- Abrasion
- Resistance to
- Chemicals
- Resistance to
- Graffiti
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Supersheen is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.
Price
£14.09
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
Price
£14.15
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2603
HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.
Price
£48.01
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9002
HMG Hardener 9002 is a 2k isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Superthane HMG Supersheen Thinner (Part 2) HMG Hardener 9002 Part two of a two-pack system Professional...
Price
£12.17
(incl. VAT)
In Stock and Available for Delivery