- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Acrythane 102 (Base) is a fast drying 2K polyurethane finish offering very good adhesion to a wide range of substrates including metal, wood and certain plastics.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG Acrythane 102 | ||||
Activator (Part 2) | HMG Hardener 9004 Standard |
- Part two of a two part system
- Available in 3,500 colours from RAL, NCS, and British Standard
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG Monothane 2K Topcoat is a fast drying 2K polyurethane finish offering very good adhesion to a wide range of substrates including metal, wood and certain plastics.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9004 Standard.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Available in 3,500 colours from RAL, NCS, and British Standard
Product Specification
Technical Data | |||||
---|---|---|---|---|---|
Acrythane 102 Semi Matt Colours | Acrythane 102 Semi Matt Colours (Contains Lead) | Acrythane 102 Gloss Colours | Acrythane 102 Gloss Colours (Contains Lead) | ||
Volume Solids: | 63.3% | 62.8% | 55.2% | 51.8% | |
VOC Content: | 0.520kgs/ltr | 0.520kgs/ltr | 0.520kgs/ltr | 0.520kgs/ltr | |
SG: | - | - | - | - | |
Viscosity: | Not Determined | Not Determined | 200 mPas | 200 mPas | |
Density: | 1.313 g/cm³ | 1.31 g/cm³ | 0.993 g/cm³ | 1.026 g/cm³ | |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |
Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | |
Pot Life: | 48 hours depending on temperature. | 48 hours depending on temperature. | - | - | |
Flash Point: | 26°C | 26°C | 26°C | 25°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Pressure Pot: | 20 - 50 μm | n/a | |
Compliant Spray Gun: | 20 - 50 μm | n/a | |
Brush: | n/a | n/a | |
Roller: | n/a | n/a |
Coverage: 17.5 square metres per litre at 25 microns dft.
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 10 - 20 minutes |
Dry To Handle: | 2 - 3 hours |
Force Dry: | 30 minutes at 70 - 90°C |
Dry To Recoat: | After through curing ( 3 hours at 20°C / 30 minutes at 70°C) denib with p500g dry. After baking allow to cool before flatting and recoating. |
Fully Cured: | 7 days |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Pressure Pot | Compliant Spray Gun | Brush | Roller | ||
Mixing Ratio: | Base: 5 | Base: 5 | Base: 5 | Base: 5 | |
Hardener: 1 | Hardener: 1 | Hardener: 1 | Hardener: 1 | ||
Thinner: 20% | Thinner: 20% | - | - | ||
Hardener Options: | Hardener 9004 Standard | Hardener 9004 Standard | Hardener 9004 Standard | Hardener 9004 Standard | |
Thinner Options: | Thinner 2601 | Thinner 2601 | - | - | |
Thinner 2602 | Thinner 2602 | - | - | ||
Viscosity: | 20 - 25 seconds B4 cup | 20 - 25 seconds B4 cup | - | - | |
Spray Gun Setup: | 1.1 - 1.4 | 1.6 - 1.8 | - | - | |
Number Of Coats (Guide Only): | Depends on application | Depends on application | - | - | |
Flash Off: | 5 - 10 minutes | 5 - 10 minutes | - | - |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
Information On Basic Physical And Chemical Properties | |||||
---|---|---|---|---|---|
Acrythane 102 Semi Matt Colours | Acrythane 102 Semi Matt Colours (Contains Lead) | Acrythane 102 Gloss Colours | Acrythane 102 Gloss Colours (Contains Lead) | ||
Form: | According to product specification | According to product specification | According to product specification | According to product specification | |
Colour: | According to product specification | According to product specification | According to product specification | According to product specification | |
Odour: | Characteristic | Characteristic | Characteristic | Characteristic | |
Odour Threshold: | Not determined | Not determined | Not determined | Not determined | |
pH-value 20°C: | Not determined | Not determined | Not determined | Not determined | |
Melting point/freezing point: | Undetermined | Undetermined | Undetermined | Undetermined | |
Initial boiling point and boiling range: | 124°C | 124°C | 124°C | 124°C | |
Flash Point: | 26°C | 26°C | 26°C | 25°C | |
Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | Not applicable | |
Ignition temperature: | 370°C | 415°C | 315°C | 315°C | |
Decomposition temperature: | Not determined. | Not determined. | Not determined. | Not determined. | |
Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |
Explosion limits: Lower: | 1.1 Vol % | 1.1 Vol % | 1.1 Vol % | 1.1 Vol % | |
Explosion limits: Upper: | 10.4 Vol % | 7.5 Vol % | 7.0 Vol % | 7.5 Vol % | |
Vapour pressure at 20°C: | 10.7 hPa | 11.2 hPa | 6.7 hPa | 11.2 hPa | |
Density at 20°C: | 1.313 g/cm³ | 1.31 g/cm³ | 0.993 g/cm³ | 1.026 g/cm³ | |
Relative density: | Not determined | Not determined | Not determined | Not determined | |
Vapour density: | Not determined | Not determined | Not determined | Not determined | |
Evaporation rate: | Not determined | Not determined | Not determined | Not determined | |
Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | |
Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | Not determined | |
Viscosity: Dynamic at 20°C: | Not determined | Not determined | 200 mPas | 200 mPas | |
Viscosity: Kinematic: | Not determined | Not determined | Not determined | Not determined | |
Solvent content: Organic solvents: | 34.9% | 35.3% | 44.7% | 48.2% | |
Solids content: | 63.3% | 62.8% | 55.2% | 51.8% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
Data sheet
- Manufacturer
- HMG Paints Limited
- Sheen
- Gloss
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L
2.5L
5L - Mixing Ratio
- Base: 5 - Hardener: 1 - Thinner: 20%
- Suitable Substrates
- Metal, wood and certain plastics.
- Touch Dry (at 20°C)
- 20 Mins
- Dry to Handle (at 20°C)
- 2 - 3 Hours
- Dry to Recoat (at 20°C)
- After through curing (3hrs@20C / 30mins@70C) denib with p500g dry. After baking allow to cool before flatting and recoating.
- Fully Cured (at 20°C)
- 7 Days
- Pot Life (at 20°C)
- 48 hours depending on temperature.
- Recommended Thinner/Cleaner
- Thinner 2601/2602
- Density
- Acrythane 102 Semi Matt Colours: 1.313 g/cm³ - Acrythane 102 Semi Matt Colours (Contains Lead): 1.31 g/cm³ - Acrythane 102 Gloss Colours: 0.993 g/cm³ - Acrythane 102 Gloss Colours (Contains Lead): 1.026 g/cm³
- Solids by Volume
- Acrythane 102 Semi Matt Colours: 63.3 % - Acrythane 102 Semi Matt Colours (Contains Lead): 62.8 % - Acrythane 102 Gloss Colours: 55.2 % - Acrythane 102 Gloss Colours (Contains Lead): 51.8 %
- VOC
- 0.520kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Finish
- Semi-Matt. Gloss
- Size
- 2.5L and 5L
- Recommended Dry Film Thickness
- 20 - 50 μm
- UN Number
- 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Plastic
- Suitable For Use On
- Wood
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Metal
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Force Dry Compatible
- Product Usage Type
- Topcoat
- Product Range
- Acrythane
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 20 mins
- Drying Properties
- Force Dry Compatible
- Product Attributes
- Non-Yellowing
- Product Attributes
- Gloss Retention
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Acrythane 102 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...