Follow us on:

HMG Speedbuild 3 Primer

HMG Speedbuild 3 Primer

PRISPEED105
HMG4425

HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer.

This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:

2-Pack System Details
Base (Part 1) HMG Speedbuild 3 Primer
Thinner (Part 2) HMG Thinner 2601
HMG Thinner 2602
HMG Thinner 2603
HMG Thinner 2604

  • Part one of a two-pack system
  • Long wet edge time
  • Quick drying
  • Can be overcoated with either 1K or 2K topcoats
  • 3,500+ colours available in RAL, NCS, British Standard shades (5L size only), standard colours in 5L and 15L

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£69.32(incl. VAT)
£57.77(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer.

Please note this product is one part of a two-pack system which MUST be purchased/used together with one of the following thinners: HMG Thinner 2601, HMG Thinner 2602, HMG Thinner 2603 or HMG Thinner 2604.



Click To Jump To Section:




Features & Benefits


  • Long wet edge time
  • Quick drying
  • Can be overcoated with either 1K or 2K topcoats



Product Specification


Technical Data
Speedbuild 3 Blue Primer Speedbuild 3 Colours UT Speedbuild 3 Colours (Contains Lead) UT Speedbuild 3 Grey Black Primer
Volume Solids: 60.5% 57.3% 58.8% 58.7%
VOC Content: 0.54kgs/ltr 0.54kgs/ltr 0.54kgs/ltr 0.54kgs/ltr
SG: - - - -
Viscosity: 760 mPas 820 mPas 820 mPas 760 mPas
Density: 1.233 g/cm³ 1.183 g/cm³ 1.232 g/cm³ 1.219 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed. Store between 5°C - 25°C. When not in use, cans must be kept sealed. Store between 5°C - 25°C. When not in use, cans must be kept sealed. Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers. 12 months from delivery date in original sealed containers. 12 months from delivery date in original sealed containers. 12 months from delivery date in original sealed containers.
Pot Life: Unlimited, stirring required over time. Unlimited, stirring required over time. Unlimited, stirring required over time. Unlimited, stirring required over time.
Flash Point: 25°C 25°C 25°C 25°C



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Compliant Spray Gun: 55 μm 100 μm
Pressure Pot: 55 μm 100 μm
Airless/Air-Assisted: 55 μm 100 μm



Coverage: 10 square metres per litre @ 55 microns dft.

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 20°C
Touch Dry: 30 minutes
Dry To Recoat: Minimum 45 mins - 1 hour at 20°C. After 24 hours, either flat prior to applying topcoat or recoat with itself.
Fully Cured: 24 hours



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Application Methods


Technical Data
Compliant Spray Gun Pressure Pot Airless/Air-Assisted
Mixing Ratio: Base: 3 Base: 3 Base: 3
Thinner: 1 Thinner: 1 Thinner: 1
Thinner Options: Thinner 2601 Thinner 2601 Thinner 2601
Thinner 2602 Thinner 2602 Thinner 2602
Thinner 2603 Thinner 2603 Thinner 2603
Thinner 2604 Thinner 2604 Thinner 2604
Viscosity: 30 - 35 seconds DIN4 30 - 35 seconds DIN4 -
Spray Gun Setup: 1.2 - 1.4 1.8 - 2.0 11 - 15 thou 40/50°
Number Of Coats (Guide Only): 1 - 2 full coats 1 - 2 full coats 1 full coat
Flash Off: 10 - 15 minutes between coats 10 - 15 minutes between coats -



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Product Notes


Information On Basic Physical And Chemical Properties
Speedbuild 3 Blue Primer Speedbuild 3 Colours UT Speedbuild 3 Colours (Contains Lead) UT Speedbuild 3 Grey Black Primer
Form: According to product specification. According to product specification. According to product specification. According to product specification.
Colour: According to product specification. According to product specification. According to product specification. According to product specification.
Odour: Characteristic Characteristic Characteristic Characteristic
Odour Threshold: Not determined Not determined Not determined Not determined
pH-value 20°C: Not determined Not determined Not determined Not determined
Melting point/freezing point: Undetermined Undetermined Undetermined Undetermined
Initial boiling point and boiling range: 137°C 137°C 137°C 137°C
Flash Point: 25°C 25°C 25°C 25°C
Flammability (solid, gas): Not applicable Not applicable Not applicable Not applicable
Ignition temperature: 500°C 400°C 450°C 450°C
Decomposition temperature: Not determined. Not determined. Not determined. Not determined.
Auto-ignition temperature: Product is not selfigniting. Product is not selfigniting. Product is not selfigniting. Product is not selfigniting.
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible." "Product is not explosive. However, formation of explosive air vapour mixtures are possible." "Product is not explosive. However, formation of explosive air vapour mixtures are possible." "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.1 Vol % 1.1 Vol % 1.1 Vol % 1.1 Vol %
Explosion limits: Upper: 7 Vol % 7 Vol % 7 Vol % 7 Vol %
Vapour pressure at 20°C: 6.7 hPa 6.7-8.2 hPa 6.7 hPa 6.7 hPa
Density at 20°C: 1.233 g/cm³ 1.183 g/cm³ 1.232 g/cm³ 1.219 g/cm³
Relative density: Not determined Not determined Not determined Not determined
Vapour density: Not determined Not determined Not determined Not determined
Evaporation rate: Not determined Not determined Not determined Not determined
Solubility in / Miscibility with water: NOT MISCIBLE NOT MISCIBLE NOT MISCIBLE NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined Not determined Not determined Not determined
Viscosity: Dynamic at 20°C: 760 mPas 820 mPas 820 mPas 760 mPas
Viscosity: Kinematic: Not determined Not determined Not determined Not determined
Solvent content: Organic solvents: 38.3% - Water 1.0% 41.5% - Water 1.0% 40.1% - Water 1.0% 40.0% - Water 1.0%
Solids content: 60.5% 57.3% 58.8% 58.7%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
4425-1004409

Data sheet

Manufacturer
HMG Paints Limited
Water / Solvent Based
Solvent
For Use On
Metal
Application Method
Spray, Pressure pot
Sheen
Matt
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
5L, 15L
Mixing Ratio
Base: 3 - Thinner: 1
Touch Dry (at 20°C)
30 Minutes
Dry to Recoat (at 20°C)
Minimum 45 mins - 1 hour @ 20°c. After 24 hours, either flat prior to applying Topcoat or recoat with itself.
Fully Cured (at 20°C)
24 hours
Pot Life (at 20°C)
Unlimited, stirring required over time
Recommended Thinner/Cleaner
Thinner 2601/2602/2603/2604
Density
Speedbuild 3 Blue Primer: 1.233 g/cm³ - Speedbuild 3 Colours UT: 1.183 g/cm³ - Speedbuild 3 Colours (Contains Lead) UT: 1.232 g/cm³ - Speedbuild 3 Grey Black Primer: 1.219 g/cm³
Solids by Volume
Speedbuild 3 Blue Primer: 60.5 % - Speedbuild 3 Colours UT: 57.3 % - Speedbuild 3 Colours (Contains Lead) UT: 58.8 % - Speedbuild 3 Grey Black Primer: 58.7 %
VOC
0.54kgs/ltr
Recommended Dry Film Thickness
55 μm
Recommended Wet Film Thickness
100 μm
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Metal
Finish
Matt
Application Method
Spray
Product Usage Type
Primer
Colour Family
White
Colour Family
Neutral
Colour Family
Metallic
Colour Family
Stone
Colour Family
Anthracite Grey
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
Clear
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Speedbuild 3 Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
HMG Thinner 2601 | Solvent & Thinner

HMG Thinner 2601

HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.

Price £14.09 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2602 | Solvent & Thinner

HMG Thinner 2602

HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.

Price £14.15 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2603 | Solvent & Thinner

HMG Thinner 2603

HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.

Price £48.01 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Thinner 2604 | Solvent & Thinner

HMG Thinner 2604

HMG Thinner 2604 is a slow thinner. For use with compatible HMG systems.

Price £14.78 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Hardener 9029 ZIP | Hardener & Activator

HMG Hardener 9029 ZIP

HMG Hardener 9029 ZIP is an isocyanate hardener. Designed for use in recommended HMG Alkyd and Polyurethane Alkyd systems. Upgrades the performance characterstics of the system, including durability and time to touch dry may decrease by 10 - 20% dependant on paint system, film thickness and curing conditions.

Price £87.98 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery