- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG HB05 Primer is an alkyd based, high build primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified zinc phosphate.
- Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc.
- It is easy to apply without fear of runs or sags at high wet film thickness.
HMG HB05 Primer is an alkyd based, high build primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified zinc phosphate.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc.
- It is easy to apply without fear of runs or sags at high wet film thickness.
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HB05 Black Primer | HB05 Grey Primer | HB05 Red Oxide Primer | HB05 White Primer | HB05 Buff Primer | ||
Volume Solids: | 58.5% | 74.1% | 70.0% | 69.7% | 70.8% | |
VOC Content: | 0.400kgs/ltr | 0.400kgs/ltr | 0.400kgs/ltr | 0.400kgs/ltr | 0.400kgs/ltr | |
SG: | - | - | - | - | - | |
Viscosity: | 200 mPas | 220 mPas | 230 mPas | 230 mPas | 200 mPas | |
Density: | 1.278 g/cm³ | 1.507 g/cm³ | 1.425 g/cm³ | 1.463 g/cm³ | 1.471 g/cm³ | |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |
Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | |
Pot Life: | - | - | - | - | - | |
Flash Point: | 24°C | 24°C | 24°C | 24°C | 24°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Airless/Air-Assisted: | 55 μm | 100 μm | |
Compliant Spray Gun: | 55 μm | 100 μm |
Coverage: 5.5 square metres per litre @ 100 microns wft
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 20 - 30 minutes |
Dry To Handle: | 3 hours |
Dry To Recoat: | 1 hour minimum |
Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Airless/Air-Assisted | Compliant Spray Gun | ||||
Mixing Ratio: | Base: 1 | Base: 1 | |||
Thinner: up to 10% | Thinner: up to 10% | ||||
Thinner Options: | Thinner 2621 | Thinner 2621 | |||
Viscosity: | 35 - 40 seconds B4 cup | 25 - 30 seconds B4 cup | |||
Spray Gun Setup: | 13 - 15 thou 40/50° | 1.8 - 2.0 | |||
Number Of Coats (Guide Only): | 1 - 2 full coats | 1 - 2 full coats | |||
Flash Off: | 10 - 15 minutes between coats | 10 - 15 minutes between coats |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HB05 Black Primer | HB05 Grey Primer | HB05 Red Oxide Primer | HB05 White Primer | HB05 Buff Primer | ||
Form: | According to product specification | According to product specification | According to product specification | According to product specification | According to product specification | |
Colour: | According to product specification | According to product specification | According to product specification | According to product specification | According to product specification | |
Odour: | Characteristic | Characteristic | Characteristic | Characteristic | Characteristic | |
Odour Threshold: | Not determined | Not determined | Not determined | Not determined | Not determined | |
pH-value 20°C: | Not determined | Not determined | Not determined | Not determined | Not determined | |
Melting point/freezing point: | Undetermined | Undetermined | Undetermined | Undetermined | Undetermined | |
Initial boiling point and boiling range: | 136°C | 136°C | 136°C | 136°C | 136°C | |
Flash Point: | 24°C | 24°C | 24°C | 24°C | 24°C | |
Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | |
Ignition temperature: | 432°C | 500°C | 500°C | 432°C | 432°C | |
Decomposition temperature: | Not determined. | Not determined. | Not determined. | Not determined. | Not determined. | |
Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |
Explosion limits: Lower: | 1.0 Vol % | 1.1 Vol % | 1 Vol % | 1.0 Vol % | 1.0 Vol % | |
Explosion limits: Upper: | 7.0 Vol % | 7 Vol % | 7 Vol % | 7.0 Vol % | 7.0 Vol % | |
Vapour pressure at 20°C: | 6.7 hPa | 6.7 hPa | Not determined | Not determined | 6.7 hPa | |
Density at 20°C: | 1.278 g/cm³ | 1.507 g/cm³ | 1.425 g/cm³ | 1.463 g/cm³ | 1.471 g/cm³ | |
Relative density: | Not determined | Not determined | Not determined | Not determined | Not determined | |
Vapour density: | Not determined | Not determined | Not determined | Not determined | Not determined | |
Evaporation rate: | Not determined | Not determined | Not determined | Not determined | Not determined | |
Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | |
Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | Not determined | Not determined | |
Viscosity: Dynamic at 20°C: | 200 mPas | 220 mPas | 230 mPas | 230 mPas | 200 mPas | |
Viscosity: Kinematic: | Not determined | Not determined | Not determined | Not determined | Not determined | |
Solvent content: Organic solvents: | 40.1% - Water 1.5% | 25.4% | 29.6% | 30.0% | 28.8% | |
Solids content: | 58.5% | 74.1% | 70.0% | 69.7% | 70.8% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid.
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Spray
- For Use On
- Steel
- Application Method
- Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 15L
- Parts
- Single part pack
- Base Type
- Alkyd based
- Mixing Ratio
- Base: 1 - Thinner: up to 10%
- Application
- Spray
- Touch Dry (at 20°C)
- 20 - 30 Minutes
- Dry to Handle (at 20°C)
- 3 Hours
- Dry to Recoat (at 20°C)
- 1 Hour minimum
- Fully Cured (at 20°C)
- 24 hours
- Density
- HB05 Black Primer: 1.278 g/cm³ - HB05 Grey Primer: 1.507 g/cm³ - HB05 Red Oxide Primer: 1.425 g/cm³ - HB05 White Primer: 1.463 g/cm³- HB05 Buff Primer: 1.471 g/cm³
- Solids by Volume
- HB05 Black Primer: 58.5 % - HB05 Grey Primer: 74.1 % - HB05 Red Oxide Primer: 70.0 % - HB05 White Primer: 69.7 % - HB05 Buff Primer: 70.8 %
- Heat Resistance (up-to)
- 60 °C
- VOC
- 0.400kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt
- Size
- 5L and 15L
- Recommended Dry Film Thickness
- 55 μm
- Recommended Wet Film Thickness
- 100 μm
- UN Number
- 1263
- Base Type
- Alkyd based
- Finish
- Matt
- Application Method
- Spray
- Product Usage Type
- Primer
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG HB05 Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications. For use with compatible HMG systems.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...