- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Polykote 2K TAP Primer (Base) is a transparent 2K adhesion promoter /primer / sealer. It is designed for use on sound OEM finishes when minimum sanding is required and has the additional benefit of being used as a `wet on wet` primer to optimise process times.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:
3-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG Polykote 2K TAP Primer | ||||
Hardener (Part 2) | HMG Hardener 9004 Standard | ||||
HMG Hardener 9027 Wintermix | |||||
Thinner (Part 3) | HMG Thinner 2601 | ||||
HMG Thinner 2602 | |||||
HMG Thinner 2603 |
- Part one of a three-pack system
- Suitable for colour changes to new vehicles
- Available as a clear
HMG Polykote 2K TAP Primer is a transparent 2K adhesion promoter/primer/sealer. It is designed for use on sound OEM finishes when minimum sanding is required and has the additional benefit of being used as a 'wet on wet' primer to optimise process times.
Please note this product is one part of a three-pack system which MUST be purchased/used together with HMG Hardener 9004 Standard or HMG Hardener 9027 Wintermix. A thinner option must also be purchased from HMG Thinner 2601, HMG Thinner 2602 or HMG Thinner 2603.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Suitable for colour changes to new vehicles
- Available as a clear
It is particularly suitable for colour changes to new vehicles as no sanding is required, however it is recommended that leading edges, such as wheelarches, front of bonnets etc, are scotchbrited for maximum performance.
Not for use as a bare metal primer.
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
Polykote 2K TAP Primer | ||||||
Volume Solids: | 49.6% | |||||
VOC Content: | 0.600 Kg/l | |||||
SG: | - | |||||
Viscosity: | 350 mPas | |||||
Density: | 1.097 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Pot Life: | 3 hours at 20°C | |||||
Flash Point: | 25°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Compliant Spray Gun: | 25 μm | 50 μm | |
Pressure Pot: | 25 μm | 50 μm |
Coverage: 16.8 square metres per litre @ 25 microns dft mixed
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 2 hours |
Dry To Recoat: | Minimum of 30 minutes at 20°C, when used as a Wet on Wet. Minimum of 4 hours at 20°C when flatting. |
Fully Cured: | 8 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Compliant Spray Gun | Pressure Pot | ||||
Mixing Ratio: | Base: 3 | Base: 3 | |||
Hardener: 1 | Hardener: 1 | ||||
Thinner: 1 | Thinner: 1 | ||||
Hardener Options: | Hardener 9004 Standard | Hardener 9004 Standard | |||
Hardener 9027 Wintermix | Hardener 9027 Wintermix | ||||
Thinner Options: | Thinner 2601 | Thinner 2601 | |||
Thinner 2602 | Thinner 2602 | ||||
Thinner 2603 | Thinner 2603 | ||||
Viscosity: | 16 - 22 seconds B4 cup | 16 - 22 seconds B4 cup | |||
Spray Gun Setup: | 1.6 - 1.8 | 1.1 - 1.4 | |||
Number Of Coats (Guide Only): | 1 - 2 even coats | 1 - 2 even coats | |||
Flash Off: | 10 - 15 minutes between coats | 10 - 15 minutes between coats |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
Polykote 2K TAP Primer | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 124°C | |||||
Flash Point: | 25°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 370°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.1 Vol% | |||||
Explosion limits: Upper: | 7.0 Vol% | |||||
Vapour pressure at 20°C: | 6.7 hPa | |||||
Density at 20°C: | 1.097 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 350 mPas | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 50.4% | |||||
Solids content: | 49.6% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable air fed respiratory equipment should be worn when spraying.
Data sheet
- Manufacturer
- Manufacturer
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Spray, Pressure pot
- Sheen
- Matt
- Colour
- Clear
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 5L
- Mixing Ratio
- Base: 3 - Hardener: 1 - Thinner: 1
- Suitable Substrates
- OEM finishes
- Suitable Substrates
- OEM finishes when minimum sanding is required
- Touch Dry (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- Minimum of 30minutes at 20°C, when used as a Wet on Wet. Minimum of 4 hours at 20°C when flatting.
- Fully Cured (at 20°C)
- 8 hours
- Pot Life (at 20°C)
- 3 hours
- Coverage
- 16.8 square metres per litre @ 25 microns dft mixed
- Recommended Thinner/Cleaner
- Thinner 2601/2602/2603
- Density
- 1.097 g/cm³
- Solids by Volume
- 49.6 %
- Heat Resistance (up-to)
- 120°C
- VOC
- 0.600 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Finish
- Matt
- Size
- 5L
- UN Number
- 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Finish
- Matt
- Application Method
- Spray
- Product Usage Type
- Primer
- Product Range
- Polykote
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Polykote 2K TAP Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
HMG Thinner 2603
HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.
HMG Hardener 9027 Wintermix
HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) Option 1: HMG Acrythane SC601 Colours Option 2: HMG Polykote 2K AMC Primer Option 3: HMG...
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...