- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG High Build Vinyl Primer Finish is a high build anti corrosive vinyl primer finish.
- Excellent adhesion
- Corrosion protection to mild steel, aluminium, stainless steel and galvanised substrates
- Available in 5,000+ colours from RAL, NCS, and British Standard
- Also available as an aerosol, please see HMG High Build Vinyl Primer Finish Aerosol
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG High Build Vinyl Primer Finish is a high build anti corrosive vinyl primer finish.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Excellent adhesion
- Corrosion protection to mild steel, aluminium, stainless steel and galvanised substrates
- Available in 5,000+ colours from RAL, NCS, and British Standard
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| High Build Vinyl Primer Finish Colours | High Build Vinyl Primer Finish Colours contains lead | High Build Vinyl Primer Finish Light Grey | High Build Vinyl Primer Finish Red Oxide | |||
| Volume Solids: | 59.0% | 58.4% | 62.9% | 63.0% | ||
| VOC Content: | 0.390 Kg/l | 0.390 Kg/l | 0.390 Kg/l | 0.390 Kg/l | ||
| SG: | - | - | - | - | ||
| Viscosity: | 250 mPas | 250 mPas | 300 mPas | 250 mPas | ||
| Density: | 1.226 g/cm³ | 1.221 g/cm³ | 1.255 g/cm³ | 1.259 g/cm³ | ||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | ||
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | ||
| Pot Life: | - | - | - | - | ||
| Flash Point: | 25°C | 25°C | 25°C | 25°C | ||
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Airless/Air-Assisted: | 30 - 60 μm | 75 - 150 μm | |
| Pressure Pot: | 30 - 60 μm | 75 - 150 μm | |
| Compliant Spray Gun: | 30 - 60 μm | 75 - 150 μm | |
Coverage: 12.5 square metres per litre @ 50 microns dft
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 60 minutes |
| Fully Cured: | 12 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
- Stainless steel should be thoroughly scuffed using Scotchbrite pads or similar then cleaned and degreased with HMG Prep Clean 2802
- Read and follow the safety data sheet, product data sheet and label instructions
- Stir all paints thoroughly before use
- Always use the same batch number on the same job
- Check colour & sheen
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Airless/Air-Assisted | Pressure Pot | Compliant Spray Gun | |||
| Mixing Ratio: | Ready for use | Ready for use | Ready for use | ||
| - | - | - | |||
| Thinner Options: | - | Thinner 2621 | Thinner 2621 | ||
| Viscosity: | - | - | - | ||
| Spray Gun Setup: | - | 1.8 - 2.2 | 13 - 18 thou 40/50° | ||
| Number Of Coats (Guide Only): | 1 - 2 full coats | 1 - 2 full coats | 1 - 2 full coats | ||
| Flash Off: | - | 15 minutes between coats | 15 minutes between coats | ||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||||
|---|---|---|---|---|---|---|
| High Build Vinyl Primer Finish Colours | High Build Vinyl Primer Finish Colours contains lead | High Build Vinyl Primer Finish Light Grey | High Build Vinyl Primer Finish Red Oxide | |||
| Form: | According to product specification | According to product specification | According to product specification | According to product specification | ||
| Colour: | According to product specification | According to product specification | According to product specification | According to product specification | ||
| Odour: | Characteristic | Characteristic | Characteristic | Characteristic | ||
| Odour Threshold: | Not determined | Not determined | Not determined | Not determined | ||
| pH-value 20°C: | Not determined | Not determined | Not determined | Not determined | ||
| Melting point/freezing point: | Undetermined | Undetermined | Undetermined | Undetermined | ||
| Initial boiling point and boiling range: | 137°C | 137°C | 137°C | 137°C | ||
| Flash Point: | 25°C | 25°C | 25°C | 25°C | ||
| Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | Not applicable | ||
| Ignition temperature: | 200°C | 200°C | 500°C | 500°C | ||
| Decomposition temperature: | Not determined. | Not determined. | Not determined. | Not determined. | ||
| Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | ||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | ||
| Explosion limits: Lower: | 0.6 Vol% | 0.6 Vol% | 1.1 Vol% | 1.1 Vol% | ||
| Explosion limits: Upper: | 7.0 Vol% | 7.0 Vol% | 7.0 Vol% | 7.0 Vol% | ||
| Vapour pressure at 20°C: | 6.7 hPa | 6.7 hPa | 6.7 hPa | 6.7 hPa | ||
| Density at 20°C: | 1.226 g/cm³ | 1.221 g/cm³ | 1.255 g/cm³ | 1.259 g/cm³ | ||
| Relative density: | Not determined | Not determined | Not determined | Not determined | ||
| Vapour density: | Not determined | Not determined | Not determined | Not determined | ||
| Evaporation rate: | Not determined | Not determined | Not determined | Not determined | ||
| Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | ||
| Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | Not determined | ||
| Viscosity: Dynamic at 20°C: | 250 mPas | 250 mPas | 300 mPas | 250 mPas | ||
| Viscosity: Kinematic: | Not determined | Not determined | Not determined | Not determined | ||
| Solvent content: Organic solvents: | 40.9% | 41.5% | 36.9% | 36.8% | ||
| Solids content: | 59.0% | 58.4% | 62.9% | 63.0% | ||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Product Details
4465-1004149
Data sheet
- Manufacturer
- HMG Paints Limited
- Application Method
- Airless Spray
Spray - Sheen
- Matt
Satin
Gloss - Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Mixing Ratio
- Ready for use
- Suitable Substrates
- Mild steel, aluminium, stainless steel and galvanised substrates.
- Touch Dry (at 20°C)
- 60 mins
- Fully Cured (at 20°C)
- 12 hours
- Coverage
- 12.5 square metres per litre @ 50 microns dft
- Recommended Thinner/Cleaner
- Thinner 2621
- Density
- High Build Vinyl Primer Finish Colours: 1.226 g/cm³ - High Build Vinyl Primer Finish Colours contains lead: 1.221 g/cm³ - High Build Vinyl Primer Finish Light Grey: 1.255 g/cm³ - High Build Vinyl Primer Finish Red Oxide: 1.259 g/cm³
- Solids by Volume
- High Build Vinyl Primer Finish Colours: 59.0% - High Build Vinyl Primer Finish Colours contains lead: 58.4% - High Build Vinyl Primer Finish Light Grey: 62.9% - High Build Vinyl Primer Finish Red Oxide: 63.0%
- VOC
- 0.390 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Recommended Dry Film Thickness
- 30 - 60 μm
- Recommended Wet Film Thickness
- 75 - 150 μm
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Mild Steel
- Suitable For Use On
- Galvanised Substrates
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Finish
- Semi-Gloss
- Application Method
- Spray
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Primer/Finish
- Usages
- Direct to Metal
- Product Usage Type
- Primer
- Product Usage Type
- Primer & Topcoat
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Product Type
- Vinyl
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Product Attributes
- Primer/Finish
- Product Attributes
- High Build
- Product Attributes
- Anti-Corrosive
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG High Build Vinyl Primer Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Prep Clean 2802
HMG Prep Clean 2802 is a fast evaporating, strong Preparatory Cleaning solvent for the heavy duty degreasing of substrates. Used in many applications For use on bare surfaces only
Price
£45.11
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications. For use with compatible HMG systems.
Price
£13.45
(incl. VAT)
In Stock and Available for Delivery
HMG High Build Vinyl Primer Finish Aerosol
HMG High Build Vinyl Primer Finish Aerosol is a 1K high build anti corrosive vinyl primer finish. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG High Build Vinyl Primer Finish. 400ml/16oz Aerosol Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty...
Price
£43.81
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery