- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Guncleaner 401 2702 is a general purpose cleaner for spray guns.
Click To Jump To Section:
Features & Benefits
- Also suitiable for equipment based on reclaimed solvents.
Good practice is to flush guns and equipment with a virgin solvent after use of 2702.
HMG Guncleaner 401 2702 should not be used as a preparatory cleaner / degreaser.
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Guncleaner 401 2702 | ||||||
Volume Solids: | 0.0% | |||||
VOC Content: | 0 Kg/l | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | 0.85 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | -18°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Guncleaner 401 2702 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 57°C | |||||
Flash Point: | -18°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 215°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.2 Vol % | |||||
Explosion limits: Upper: | 7.1 Vol % | |||||
Vapour pressure at 20°C: | 29 hPa | |||||
Density at 20°C: | 0.85 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | Fully miscible | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 100.0% | |||||
Solids content: | 0.0 % |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Single, Two or Three Pack
- Single
- Key Features
- General purpose cleaner for Spray Guns and equipment based on reclaimed solvents.
- Density
- 0.85 g/cm³
- Solids by Volume
- 0.0%
- VOC
- 0 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Size
- 5L
- UN Number
- 1263
- Product Usage Type
- Cleaner
- Categorised As
- Accessories > Tool/Equipment Cleaners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Guncleaner 401 2702 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT