- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Thinner 2600 is a very fast thinner.
Click To Jump To Section:
Features & Benefits
- For use in recommended HMG systems.
For use with the following HMG products:
- HMG Acrythane SC601 Colours
- HMG Acrythane XSC21
- HMG Acrythane XSC21 Clear
- HMG Polyester Spray Filler KF8
- HMG Polykote 2K AMC Primer
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2600 | ||||||
Volume Solids: | 0.0% | |||||
VOC Content: | 0.810kgs/ltr | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | 0.844 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | -17°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2600 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 55.8°C | |||||
Flash Point: | -17°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 404°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.2 Vol % | |||||
Explosion limits: Upper: | 11.5 Vol % | |||||
Vapour pressure at 20°C: | 10,400 hPa | |||||
Density at 20°C: | 0.844 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | Fully miscible | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 100.0% | |||||
Solids content: | 0.0% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Key Features
- For use in recommended HMG systems.
- Density
- 0.844 g/cm³
- Solids by Volume
- 0.0%
- VOC
- 0.810kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 5L & 25L
- UN Number
- 1263
- Product Usage Type
- Thinner
- Categorised As
- Accessories > Thinners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Thinner 2600 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Acrythane XSC21
We no longer stock this product, but can recommend HMG Acrythane SC601 Colours as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113...
HMG Acrythane XSC21 Clear
We no longer stock this product, but can recommend HMG Acrythane SC601 Colours as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113...
HMG Acrythane SC601 Colours
HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours Activator (Part 2)...
HMG Polykote 2K AMC Primer
HMG Polykote 2K AMC Primer is a 2K isocyanate cured `wet on wet` acrylic polyurethane primer/surfacer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Polykote 2K AMC Primer Hardener (Part 2) HMG Hardener 9004 Standard...
HMG Polyester Spray Filler KF8
HMG Polyester Spray Filler KF8 is a 2K heavy bodied sprayable filler which can be used for the deep filling of substrates of various types. Two part system - 5L base with 500ml hardener Used extensively in the automotive re-finishing field, where its ultra high build and quick curing make it ideal for use in repair situations Other uses...