- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Thinner 2642 is a medium slow thinner which can be used with compatible HMG systems.
Click To Jump To Section:
Features & Benefits
- For use with cellulose based systems.
Suitable for use with the following HMG products:
- HMG Cellulose Fluorescent
- HMG Pre Cat Standard Sealer
- HMG M99 Gipgloss Cellulose Enamel
- HMG Cellulose APS Primer
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2642 | ||||||
Volume Solids: | 0.0% | |||||
VOC Content: | 0.860kgs/ltr | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | 0.864 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | -17°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2642 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 55.8°C | |||||
Flash Point: | -17°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 400°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.1 Vol % | |||||
Explosion limits: Upper: | 7.5 Vol % | |||||
Vapour pressure at 20°C: | 29 hPa | |||||
Density at 20°C: | 0.861 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | Fully miscible | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 100.0% | |||||
Solids content: | 0.0% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Density
- 0.864 g/cm³
- Solids by Volume
- 0.0%
- VOC
- 0.860kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 5L & 25L
- UN Number
- 1263
- Product Usage Type
- Thinner
- Categorised As
- Accessories > Thinners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Thinner 2642 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG M99 Gipgloss Cellulose Enamel
We no longer stock this product, but can recommend HMG M99 Cellulose as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
HMG Cellulose Fluorescent
HMG Cellulose Fluorescent is a high quality fluorescent cellulose product for automotive and industrial use. HMG Cellulose Fluorescent is part of a three coat system: 3 Coat System Details Coat 1 HMG Cellulose APS Primer (White) Coat 2 HMG Cellulose Fluorescent Coat 3 HMG Acrythane XSC21 Clear Part two...
HMG Cellulose APS Primer
HMG Cellulose APS Primer is a quick drying cellulose primer for use in aerosols, classic car refinish and industrial applications. Available in grey or white Also available as an aerosol, please see HMG Cellulose APS Primer Aerosol Order a Colour Sample
HMG Pre Cat Standard Sealer
HMG Pre Cat Standard Sealer is a 1K basecoat/sealer for use on wood and veneer. Fast drying. Contains no sterate. Excellent and easy sandability. Gives excellent and tenacious adhesion to wood with minimal preparation. Minimises sinkage of topcoats. Enables fast throughput of work to a high standard.