- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Ensi Urethane Oil is an easy-to-use urethane oil which penetrates into concrete floors and walls, withstanding well abrasion, washing and chemicals.
- For oiling of concrete surfaces
- Penetrates into concrete without forming a protective film
- Withstands well abrasion and washing
- Resistant against petrol, spirits and lubrication oils and grease
- Resistant against vegetable and animal grease and weak solutions of acids and alkali
- Suitable for industry such as warehouses, store and cellar spaces
- For professional use only
Tikkurila Ensi Urethane Oil is an easy-to-use urethane oil which penetrates into concrete and withstands well abrasion and washing. The product is easy to apply by brush or roller.
Ensi Urethane Oil is used for dust binding of concrete surfaces. It is suitable for concrete floors and walls in industrial facilities, warehouses and cellars.
For professional use only
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Thinners
- Cleaning
- Application Conditions
- Application
- VOC
- Health And Safety
Features & Benefits
- Easy-to-use urethane oil which penetrates into concrete and withstands well abrasion and washing
- Easy to apply by brush or roller
- For dust binding of concrete surfaces
- Suitable for concrete floors and walls in industrial facilities, warehouses and cellars.
- Resistant against petrol, spirits and lubrication oils and grease.
- Resistant against vegetable and animal grease and weak solutions of acids and alkali
- Penetrates into concrete without forming a protective film
Technical Data
- Volume Solids: 30±2%
- Specific Gravity: 77±2%
- Practical Coverage
- Coverage on concrete floors is on the average:
- Porous concrete surfaces: 3–6 m²/l
- Tight concrete surfaces: 10–15 m²/l
- Coverage on concrete floors is on the average:
Practical coverage depends on the porosity of the substrate and on the application method.
Drying Time:
- Dust dry after 2 hours
- Touch dry after 6 hours
- Dries also in low temperature, over +5ºC
Surface Preparation
New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor.
Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust.
Thinners
White spirit.
Cleaning
White spirit.
Application Conditions
- The relative humidity of the concrete should not exceed 97%.
- The temperature of the ambient air, surface or coating should not fall below +5ºC during application or drying.
- Relative humidity of air should not exceed 80%.
Application
- By brush or roller.
- Prime using 10–20% thinned ENSI urethane oil. Pour ENSI onto the floor and apply evenly.
- The second treatment can be carried out after 12–24 hours after priming if necessary.
- Note! Apply ENSI thinly so that after drying it has completely absorbed into the concrete.
VOC
- VOC 2004/42/EC (cat A/h) 750 g/l (2010)
- Ensi: max. VOC < 750 g/l
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For professional use only
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Tikkurila
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Solvent
- For Use On
- Concrete
- Application Method
- Brush, Roller
- Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Parts
- One
- Base Type
- Urethane oil
- Interior/Exterior Use
- Interior
- Solvent
- Mixture (see Safety Data Sheet)
- Coverage
- Porous concrete surfaces: 3–6 m²/l (See Data Sheet for more info)
- Recommended Thinner/Cleaner
- White spirit
- Min. Application Temperature
- 5ºC
- Solids by Volume
- 30±2%
- UN Number
- UN1263
- Touch Dry (at 23°C)
- 6 hrs
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Sealer
- Product Range
- Ensi
- Colour Family
- Clear
- Product Type
- Oil
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Ensi Urethane Oil is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Duasolid 50
Tikkurila Duasolid 50, a two-component, high-solids oxirane ester paint containing active anti-corrosive pigments. This eco-friendly alternative to epoxy and polyurethane paints is suitable for earth moving machines, haulage and lifting equipment, forklifts, agricultural machinery, electric appliances, pumps and other steel structures,...
Tikkurila Fontecryl AP
Tikkurila Fontecryl AP is a water-borne, one-component fast-drying acrylic based primer for various surfaces containing active anti-corrosive pigments. Provides excellent adhesion Used as an anti-corrosive primer on steel, aluminium and zinc surfaces Suitable for dipping Can be overcoated both with water and solvent-borne topcoats Wide...