- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Thinner 2711 is a low odour thinner recommended for use in certain HMG systems.
Click To Jump To Section:
Features & Benefits
- Suitable for various HMG systems.
For use with the following HMG products:
- HMG Nisocoat 2
- HMG Epilife 2
- HMG Epoxy Primer EP2
- HMG Epoxy Primer EPC
- HMG Chromate Free Etch Primer
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2711 | ||||||
Volume Solids: | 20.0% | |||||
VOC Content: | 0.890kgs/ltr | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | Not determined | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | 41°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2711 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 150°C | |||||
Flash Point: | 41°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 450°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 0.7 Vol % | |||||
Explosion limits: Upper: | 8.1 Vol % | |||||
Vapour pressure at 20°C: | 5 hPa | |||||
Density at 20°C: | Not determined | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 75.0% | |||||
Solvent content: | 20.0% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Density
- Not determined
- Solids by Volume
- 20.0%
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 5L
- UN Number
- 1263
- Product Usage Type
- Thinner
- Categorised As
- Accessories > Thinners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Thinner 2711 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Nisocoat 2
HMG Nisocoat 2 (Base) is a 2K non-isocyanate acrylic product formulated to provide a tough, chemically resistant, high quality coating. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Nisocoat 2 Hardener (Part 2) HMG...
HMG Epilife 2
HMG Epilife 2 (Base) is a 2K epoxy finish that has excellent application properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Epilife 2 Activator (Part 2) Option 1: Hardener 9070 (for a gloss finish) Option 2:...
HMG Epoxy Primer EP2 2K
HMG Epoxy Primer EP2 is a zinc phosphate 2K epoxy primer offering excellent adhesion. Supplied as a 4L two-pack product comprising 3L Base and 1L Hardener. Water and chemical resistant. Medium solids 2K epoxy primer. Good corrosion protection. Suitable for commercial transport, bus, coach and rail applications. Designed to be...
HMG Epoxy Primer EPC
HMG Epoxy Primer EPC (Base) is a medium solids epoxy primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Epoxy Primer EPC Activator (Part 2) HMG Epoxy Hardener EPC 9056 Part one of a two part system....
HMG Chromate Free Etch Primer
HMG Chromate Free Etch Primer is a quick drying chromate free etch primer providing good anti corrosive properties and excellent adhesion to ferrous and non-ferrous metals. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator when used as a wash primer: 2-Pack System Details Base...