- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Acid Cat 91 Hardener is an acid catalyst hardener.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG Acid Cat MB Sealer | ||||
HMG Acid Cat MB Colours | |||||
HMG DG282 14 MDF Sealer | |||||
Hardener (Part 2) | HMG Acid Cat 91 Hardener |
- Part two of a two-pack system
- For use in the HMG range of high solid woodfinishes
HMG Acid Cat 91 Hardener is an acid catalyst hardener.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Acid Cat MB Sealer, HMG Acid Cat MB Colours or HMG DG282 14 MDF Sealer.
Click To Jump To Section:
Features & Benefits
- For use in the HMG range of high solid woodfinishes
For use with the following HMG products:
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Acid Cat 91 Hardener | ||||||
Volume Solids: | 19.8% | |||||
VOC Content: | 0.780kgs/ltr | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | 0.894 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | 13°C | |||||
Mixing Ratio: | Base 9 - Hardener 1 |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Acid Cat 91 Hardener | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 78°C | |||||
Flash Point: | 13°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 415°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.2 Vol % | |||||
Explosion limits: Upper: | 15.0 Vol % | |||||
Vapour pressure at 20°C: | 59 hPa | |||||
Density at 20°C: | 0.894 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | PARTIALLY MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 79.8% - Water: 0.4% | |||||
Solvent content: | 19.8% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Single, Two or Three Pack
- Single
- Application
- Spray
- Density
- 0.894 g/cm³
- Solids by Volume
- 19.8%
- VOC
- 0.780kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 500ml & 2L
- UN Number
- 3469
- Application Method
- Spray
- Product Usage Type
- Hardener
- Categorised As
- Accessories > Hardeners & Activators
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Acid Cat 91 Hardener is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Acid Cat MB Colours
HMG Acid Cat MB Colours (Base) is a high solids, two-pack compliant system designed for application onto wood substrates offering fast drying and excellent colour retention. Now supplied as a composite two-pack system including Base and Hardener Available in 3,500 colours from RAL, NCS, and British Standard Please note: Colours are sold...
HMG DG282 14 MDF Sealer
HMG DG282 14 MDF Sealer (Base) is a high solids, fast drying MDF primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG DG282 14 MDF Sealer Hardener (Part 2) HMG Acid Cat 91 Hardener One part of a two part...
HMG Acid Cat MB Sealer
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. HMG Acid Cat MB Sealer (Base) is a high solids basecoat/sealer This product MUST be purchased/used in conjuction with its manufacturer...