- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | Option 1: HMG Acrythane SC601 Colours | ||||
Option 2: HMG Polykote 2K AMC Primer | |||||
Option 3: HMG Polykote HS Rapidbuild 2K Primer | |||||
Option 4: HMG Polykote 2K TAP Primer | |||||
Activator (Part 2) | HMG Hardener 9027 Wintermix |
- Part two of a two part system
- For use in recommended HMG 2K systems
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener.
This product is categorised for Industrial/Professional use only and from 24th August 2023 adequate training will be mandatory before use. A dedicated website has been created to deliver training and provide more information: https://www.safeusediisocyanates.eu/.
Please note this product is one part of a two-pack system which MUST be purchased/used together with:
- HMG Acrythane SC601 Colours
- HMG Polykote 2K AMC Primer
- HMG Polykote HS Rapidbuild 2K Primer
- HMG Polykote 2K TAP Primer
Click To Jump To Section:
Features & Benefits
- For use in recommended HMG 2K systems
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9027 Wintermix | ||||||
Volume Solids: | 34.2% | |||||
VOC Content: | 0.600kgs/ltr | |||||
SG: | - | |||||
Viscosity: | 600 mPas | |||||
Density: | 0.958 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | 27°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9027 Wintermix | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 120°C | |||||
Flash Point: | 27°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 315°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.2 Vol % | |||||
Explosion limits: Upper: | 7.5 Vol % | |||||
Vapour pressure at 20°C: | 11.2 hPa | |||||
Density at 20°C: | 0.958 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 600 mPas | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 65.8% | |||||
Solvent content: | 34.2% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Single, Two or Three Pack
- Single
- Density
- 0.958 g/cm³
- Solids by Volume
- 34.2%
- VOC
- 0.600kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 1L, 2.5L, 5L
- UN Number
- 1263
- Base Type
- Isocyanite
- Product Usage Type
- Hardener
- Categorised As
- Accessories > Hardeners & Activators
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Hardener 9027 Wintermix is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Acrythane SC601 Colours
HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours Activator (Part 2)...
HMG Polykote 2K AMC Primer
HMG Polykote 2K AMC Primer is a 2K isocyanate cured `wet on wet` acrylic polyurethane primer/surfacer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Polykote 2K AMC Primer Hardener (Part 2) HMG Hardener 9004 Standard...
HMG Polykote HS Rapidbuild 2K Primer
HMG Polykote HS Rapidbuild 2K Primer is a high quality 2K isocyanate cured acrylic polyurethane primer/filler. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Polykote HS Rapidbuild 2K Primer Hardener (Part 2) HMG...
HMG Polykote 2K TAP Primer
HMG Polykote 2K TAP Primer (Base) is a transparent 2K adhesion promoter /primer / sealer. It is designed for use on sound OEM finishes when minimum sanding is required and has the additional benefit of being used as a `wet on wet` primer to optimise process times. This product MUST be purchased/used in conjuction with its manufacturer...