- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Hardener 9029 ZIP is an isocyanate hardener.
- Designed for use in recommended HMG Alkyd and Polyurethane Alkyd systems.
- Upgrades the performance characterstics of the system, including durability and time to touch dry may decrease by 10 - 20% dependant on paint system, film thickness and curing conditions.
HMG Hardener 9029 ZIP is an isocyanate hardener.
Click To Jump To Section:
Features & Benefits
- Designed for use in recommended HMG Alkyd and Polyurethane Alkyd systems.
- Upgrades the performance characterstics of the system, including durability and time to touch dry may decrease by 10 - 20% dependant on paint system, film thickness and curing conditions.
For use with the following HMG products:
- HMG C71 Speedline
- HMG Coach Enamel
- HMG SAH300 Enamel
- HMG 14 Line Fleet Polyurethane
- HMG Speedbuild 3 Primer
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9029 ZIP | ||||||
Volume Solids: | 70.0% | |||||
VOC Content: | 0.263kgs/ltr | |||||
SG: | - | |||||
Viscosity: | 200 mPas | |||||
Density: | 1.08 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | 40°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9029 ZIP | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 140°C | |||||
Flash Point: | 40°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 315°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.1 Vol % | |||||
Explosion limits: Upper: | 10.8 Vol % | |||||
Vapour pressure at 20°C: | 6.7 - 8.2 hPa | |||||
Density at 20°C: | 1.08 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 200 mPas | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 29.7% | |||||
Solvent content: | 70.0% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Single, Two or Three Pack
- Single
- Parts
- Single part pack
- Density
- 1.08 g/cm³
- Solids by Volume
- 70.0%
- VOC
- 0.263kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 1L
- UN Number
- 1263
- Base Type
- Isocyanite
- Product Usage Type
- Hardener
- Categorised As
- Accessories > Hardeners & Activators
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Hardener 9029 ZIP is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG C71 Speedline
HMG C71 Speedline is a high quality, single pack, synthetic alkyd enamel suitable for brushing or spraying. Offers fast surface drying, good through drying (even in thick films), and a hard, tough finish, with minimal yellowing even at high temperature - ideal for machinery, appliance and agricultural projects. For use on ferrous and...
HMG Coach Enamel
HMG Coach Enamel is traditional, ultra high quality, high build, long oil synthetic enamel for brush application. It gives an extra long wet edge time allowing it to be brushed without brush drag. High gloss Excellent water resistance Flexible with good exterior durability and toughness Available in 3,500 colours from RAL, NCS, and...
HMG SAH300 Enamel
HMG SAH300 Enamel is a high solids, gloss 1K polyurethane alkyd designed for brush application. Excellent protection against harsh weather conditions, atmospheric pollution, road dirt, sharp cleaning agents and mechanical car washes etc Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please...
HMG 14 Line Fleet Polyurethane
HMG 14 Line Fleet Polyurethane is a high build, high solids polyurethane based on a unique blend of polyurethane alkyds. It combines a long wet edge time with excellent hot spray application offering superb durability and gloss retention. Can be brushed directly from the can or with the addition of a small amount of thinner Suitable for...
HMG Speedbuild 3 Primer
HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner: 2-Pack System Details Base (Part 1) HMG Speedbuild 3 Primer Thinner (Part 2) HMG Thinner 2601 HMG Thinner 2602 HMG...