Follow us on:

HMG 2K Etch Activator KR08 | Hardener & Activator

HMG 2K Etch Activator KR08

CURETCKR
HMG4533

HMG 2K Etch Activator KR08 is an etch activator for use in recommended HMG systems.

This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:

2-Pack System Details
Base (Part 1) HMG Chromate Free Etch Primer
Activator (Part 2) HMG 2K Etch Activator KR08

  • Part two of a two part system.
Size
£58.66(incl. VAT)
£48.88(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG 2K Etch Activator KR08 is an etch activator for use in recommended HMG systems.

Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Chromate Free Etch Primer.



Click To Jump To Section:




Features & Benefits




Product Specification


Technical Data
HMG 2K Etch Activator KR08
Volume Solids: 0.5%
VOC Content: 0.850kgs/ltr
SG: -
Viscosity: Not determined
Density: 0.851 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Flash Point: 24°C



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Product Notes


Information On Basic Physical And Chemical Properties
HMG 2K Etch Activator KR08
Form: According to product specification
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value 20°C: Not determined
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 108°C
Flash Point: 24°C
Flammability (solid, gas): Not applicable
Ignition temperature: 390°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.0 Vol %
Explosion limits: Upper: 12.0 Vol %
Vapour pressure at 20°C: 12 hPa
Density at 20°C: Not determined
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: Not determined
Viscosity: Kinematic: Not determined
Solvent content: Organic solvents: 23.4% - Water: 0.1%
Solvent content: 0.5%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.

Click to go back to the top of the page

Product Details
4533-705487

Data sheet

Manufacturer
HMG Paints Limited
Single, Two or Three Pack
Single
Parts
Single part pack
Density
0.851 g/cm³
Solids by Volume
0.5%
VOC
0.850kgs/ltr
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers
Size
5L
UN Number
1263
Product Usage Type
Additive
Categorised As
Accessories > Hardeners & Activators
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG 2K Etch Activator KR08 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like