- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Description
HMG Brushing Additive A1257 is an additive designed for alkyd enamels.
Click To Jump To Section:
Features & Benefits
- Designed to aid the brushability and wet edge time
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Brushing Additive A1257 | ||||||
Volume Solids: | 27.5% | |||||
VOC Content: | - | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | 0.894 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | 40°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Brushing Additive A1257 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 150°C | |||||
Flash Point: | 40°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 245°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 0.7 Vol % | |||||
Explosion limits: Upper: | 6.1 Vol % | |||||
Vapour pressure at 20°C: | 2.1 hPa | |||||
Density at 20°C: | 0.894 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | 13 s (DIN 53211/4) | |||||
Solvent content: Organic solvents: | 60.9% | |||||
Solvent content: | 27.5% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Product Details
4535-705500
Data sheet
- Manufacturer
- HMG Paints Limited
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
- Parts
- Single part pack
- Density
- 0.894 g/cm³
- Solids by Volume
- 27.5%
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- UN Number
- UN1263
- Product Usage Type
- Additive
- Categorised As
- Accessories > Brushing Additives
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Brushing Additive A1257 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT