Follow us on:

HMG Acrylic Eggshell | 400+ Colours | Multi Surface Paint Finish
HMG Acrylic Eggshell | 400+ Colours | Multi Surface Paint Finish

HMG Acrylic Eggshell

DEC500
HMG4546

Water-based mid-sheen finish decorative emulsion in 3,500+ colours (5L only) that provides a durable, washable finish, resistant to condensation.

  • Ease of use
  • Quick drying
  • Low odour

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£41.96(incl. VAT)
£34.97(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG Acrylic Eggshell is a water-based mid-sheen finish decorative emulsion that provides a durable, washable finish, resistant to condensation.



Click To Jump To Section:




Features & Benefits


  • Ease of use
  • Quick drying
  • Low odour



Product Specification


Technical Data
HMG Acrylic Eggshell
Volume Solids: 55.8%
VOC Content: 0.11 Kg/l
SG: -
Viscosity: 2,500 mPas
Density: 1.377 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Pot Life: -
Flash Point: n/a



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Brush 30μm 80μm
Roller 30μm 80μm
Compliant Spray Gun 30μm 80μm



Coverage: 20 square metres per litre @ 25 microns dft

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 20°C
Touch Dry: 30 minutes
Dry To Recoat: 16 hours minimum, 14 days maximum
Fully Cured: 24 hours



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Application Methods


Technical Data
Brush Roller Compliant Spray Gun
Mixing Ratio: Ready for use Ready for use Base: 1
- - Thinner: >10%
Thinner Options: - - Water
Viscosity: - - -
Spray Gun Setup: - - 1.2 - 1.4
Number Of Coats (Guide Only): 1 - 2 coats 1 - 2 coats 1 - 2 coats
Flash Off: 15 minutes between coats 15 minutes between coats 15 minutes between coats



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Product Notes


Information On Basic Physical And Chemical Properties
HMG Acrylic Eggshell
Form: According to product specification
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value 20°C: 8.5
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 100°C
Flash Point: Not applicable
Flammability (solid, gas): Not applicable
Ignition temperature: 371°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: Not determined
Explosion limits: Upper: Not determined
Vapour pressure at 20°C: 23 hPa
Density at 20°C: 1.377 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: Fully miscible
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: 2,500 mPas
Viscosity: Kinematic: Not determined
Solvent content: Organic solvents: 11.2% - Water: 33.0%
Solids content: 55.8%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
4546-889953

Data sheet

Manufacturer
HMG Paints Limited
Water / Solvent Based
Water
Application Method
Brush
Roller
Spray
Sheen
Eggshell
Colour
Standard / Ready Mixed, Fully Tintable
VOC Levels
Low (50-149 g/l)
Single, Two or Three Pack
Single
Pack Size
2.5L
5L
Touch Dry (at 20°C)
30 minutes
Dry to Recoat (at 20°C)
16 hours minimum, 14 days maximum
Fully Cured (at 20°C)
24 hours
Density
1.377 g/cm³
Solids by Volume
55.8%
VOC
0.11 Kg/l
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
Finish
Eggshell
Size
2.5L
5L
Recommended Dry Film Thickness
30μm
Recommended Wet Film Thickness
80μm
Base Type
Water-Based
Finish
Eggshell
Application Method
Brush
Application Method
Roller
Application Method
Spray
Product Usage Type
Topcoat
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
White
Colour Family
Neutral
Colour Family
Metallic
Colour Family
Stone
Colour Family
Anthracite Grey
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Acrylic Eggshell is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT