- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Satin Trim Paint is a premium quality water-based, decorative and protective finish for use over correctly prepared joinery.
- Ideal for windows, doors, soffits and fascias
- Ease of use
- Quick drying
- Low odour
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG Satin Trim Paint is a premium quality water-based, decorative and protective finish for use over correctly prepared joinery.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Ideal for windows, doors, soffits and fascias
- Ease of use
- Quick drying
- Low odour
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Satin Trim Paint Neurtral | HMG Satin Trim Paint Colours | HMG Satin Trim Paint White | ||||
Volume Solids: | 41.6% | 40.9% | 55.6% | |||
VOC Content: | 0.11 Kg/l | 0.11 Kg/l | 0.11 Kg/l | |||
SG: | - | - | - | |||
Viscosity: | 1,750 mPas | 200 mPas | 10,500 mPas | |||
Density: | 1.086 g/cm³ | 1.088 g/cm³ | 1.306 g/cm³ | |||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||
Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | |||
Pot Life: | - | - | - | |||
Flash Point: | n/a | n/a | n/a |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Brush | 30μm | 80μm | |
Roller | 30μm | 80μm | |
Compliant Spray Gun | 30μm | 80μm |
Coverage: 12 square metres per litre @ 30 microns dft (Theoretical).
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 30 minutes |
Dry To Recoat: | 4 - 6 hours dependant on wft and drying conditions e.g. temperature and air movement. If not fully ready, dragging and film damage may occur. |
Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Brush | Roller | Compliant Spray Gun | |||
Mixing Ratio: | Ready for use | Ready for use | Base: 1 | ||
- | - | Thinner: >10% | |||
Thinner Options: | - | - | Water | ||
Viscosity: | - | - | - | ||
Spray Gun Setup: | - | - | - | ||
Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | 1 - 2 coats | ||
Flash Off: | - | - | - |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Satin Trim Paint Neurtral | HMG Satin Trim Paint Colours | HMG Satin Trim Paint White | ||||
Form: | According to product specification | According to product specification | According to product specification | |||
Colour: | According to product specification | According to product specification | According to product specification | |||
Odour: | Characteristic | Characteristic | Characteristic | |||
Odour Threshold: | Not determined | Not determined | Not determined | |||
pH-value 20°C: | Not determined | Not determined | Not determined | |||
Melting point/freezing point: | Undetermined | Undetermined | Undetermined | |||
Initial boiling point and boiling range: | 100°C | 100°C | 100°C | |||
Flash Point: | Not applicable | Not applicable | Not applicable | |||
Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | |||
Ignition temperature: | 370°C | 370°C | 370°C | |||
Decomposition temperature: | Not determined. | Not determined. | Not determined. | |||
Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | |||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||
Explosion limits: Lower: | Not determined | Not determined | Not determined | |||
Explosion limits: Upper: | Not determined | Not determined | Not determined | |||
Vapour pressure at 20°C: | 23 hPa | 23 hPa | 23 hPa | |||
Density at 20°C: | 1.086 g/cm³ | 1.088 g/cm³ | 1.306 g/cm³ | |||
Relative density: | Not determined | Not determined | Not determined | |||
Vapour density: | Not determined | Not determined | Not determined | |||
Evaporation rate: | Not determined | Not determined | Not determined | |||
Solubility in / Miscibility with water: | Fully miscible | Fully miscible | Fully miscible | |||
Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | |||
Viscosity: Dynamic at 20°C: | 1,750 mPas | 200 mPas | 10,500 mPas | |||
Viscosity: Kinematic: | Not determined | Not determined | Not determined | |||
Solvent content: Organic solvents: | 5.4% - Water: 52.9% | 5.8% - Water: 53.3% | 3.5% - Water: 40.8% | |||
Solids content: | 41.6% | 40.9% | 55.6% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Water
- For Use On
- Wood
- Application Method
- Brush, Roller, Spray
- Sheen
- Satin
- Colour
- Standard / Ready Mixed, Fully Tintable
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L - Touch Dry (at 20°C)
- 30 minutes
- Dry to Recoat (at 20°C)
- 4 - 6 hours dependant on wft and drying conditions e.g. temperature and air movement. If not fully ready, dragging and film damage may occur.
- Fully Cured (at 20°C)
- 24 hours
- Density
- HMG Satin Trim Paint Neurtral: 1.086 g/cm³ - HMG Satin Trim Paint Colours: 1.088 g/cm³ - HMG Satin Trim Paint White: 1.306 g/cm³
- Solids by Volume
- HMG Satin Trim Paint Neurtral: 41.6% - HMG Satin Trim Paint Colours: 40.9% - HMG Satin Trim Paint White: 55.6%
- VOC
- 0.11 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 30μm
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Suitable For Use On
- Doors
- Suitable For Use On
- Windows
- Suitable For Use On
- Soffits
- Suitable For Use On
- Fascias
- Finish
- Satin
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Product Usage Type
- Topcoat
- Type of Wood Finish
- Wood Paint
- Suitable For
- Interior Doors, Windows & Trim
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Satin Trim Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT