- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
High opacity acrylic durable coating for exterior masonry in 3,500+ colours.
- Good coverage, up to 10 square metres per litre
- Touch dry in as little an 1 hour, ready for recoating
- Brush or roller application
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG Waterborne Smooth Masonry Paint is a high opacity acrylic durable coating for exterior masonry.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Good coverage, up to 10 square metres per litre
- Touch dry in as little an 1 hour, ready for recoating
- Brush or roller application
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
Waterborne Decorative Masonry Paint White | Waterborne Decorative Masonry Paint Colours | |||||
Volume Solids: | 65.3% | 52.9% | ||||
VOC Content: | 0.012kgs/ltr | 0.012kgs/ltr | ||||
SG: | - | - | ||||
Viscosity: | 9500 mPas | 9500 mPas | ||||
Density: | 1.538 g/cm³ | 1.295 g/cm³ | ||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | ||||
Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | ||||
Pot Life: | - | - | ||||
Flash Point: | n/a | n/a |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Roller: | 80 μm | 120 μm | |
Brush: | 80 μm | 120 μm |
Coverage: 10 square metres per litre @ 80 microns dft. (Theoretical).
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 1 hour |
Dry To Recoat: | After 1 hour |
Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Brush | Roller | ||||
Mixing Ratio: | Ready for use. | Ready for use. | |||
- | - | ||||
Thinner Options: | - | - | |||
Viscosity: | - | - | |||
Spray Gun Setup: | - | - | |||
Number Of Coats (Guide Only): | 1 - 2 coats | 1 - 2 coats | |||
Flash Off: | - | - |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
Waterborne Decorative Masonry Paint White | Waterborne Decorative Masonry Paint Colours | |||||
Form: | According to product specification | According to product specification | ||||
Colour: | According to product specification | According to product specification | ||||
Odour: | Characteristic | Characteristic | ||||
Odour Threshold: | Not determined | Not determined | ||||
pH-value 20°C: | 8.5 | 7.5 | ||||
Melting point/freezing point: | Undetermined | Undetermined | ||||
Initial boiling point and boiling range: | 100°C | 100°C | ||||
Flash Point: | Not applicable. | Not applicable. | ||||
Flammability (solid, gas): | Not applicable | Not applicable | ||||
Ignition temperature: | - | - | ||||
Decomposition temperature: | Not determined. | Not determined. | ||||
Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | ||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | ||||
Explosion limits: Lower: | Not determined | Not determined | ||||
Explosion limits: Upper: | Not determined | Not determined | ||||
Vapour pressure at 20°C: | 23 hPa | 23 hPa | ||||
Density at 20°C: | 1.538 g/cm³ | 1.295 g/cm³ | ||||
Relative density: | Not determined | Not determined | ||||
Vapour density: | Not determined | Not determined | ||||
Evaporation rate: | Not determined | Not determined | ||||
Solubility in / Miscibility with water: | Fully miscible | Fully miscible | ||||
Partition coefficient: n-octanol/water: | Not determined | Not determined | ||||
Viscosity: Dynamic at 20°C: | 9500 mPas | 9500 mPas | ||||
Viscosity: Kinematic: | Not determined | Not determined | ||||
Solvent content: Organic solvents: | 0.8% - Water: 33.2% | 1.6% - Water: 42.8% | ||||
Solids content: | 65.3% | 52.9% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use By
- Professional Use
- Sheen
- Matt
- Colour
- Colour Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Mixing Ratio
- RFU
- Touch Dry (at 20°C)
- 1 hour
- Dry to Recoat (at 20°C)
- After 1 hour
- Fully Cured (at 20°C)
- 24 hours
- Min. Application Temperature
- 5°C
- Density
- Waterborne Decorative Masonry Paint White: 1.538 g/cm³ - Waterborne Decorative Masonry Paint Colours: 1.295 g/cm³
- Solids by Volume
- Waterborne Decorative Masonry Paint White: 65.3% - Waterborne Decorative Masonry Paint Colours: 52.9%
- VOC
- 0.012kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt
- Size
- 5L
- Recommended Dry Film Thickness
- 80 μm
- Recommended Wet Film Thickness
- 120 μm
- UN Number
- Void
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Topcoat
- Product Range
- Waterborne
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Categorised As
- Smooth Masonry Finishes
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Waterborne Smooth Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT