- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Epoxy Surface Tolerant Primer, a high performance two pack epoxy primer for manually cleaned steel, particularly of interest in “safety” areas where “blast cleaning” is not allowed.
Epoxy/Polyamide binder with anti corrosive and inorganic pigments and thinned with Aromatic Hydrocarbon and Alcohol solvents.
- Two-pack
- Brush or spray application
- Airless spray preferred for large areas, such as storage tanks
Tor Epoxy Surface Tolerant Primer is a high performance two pack epoxy primer for manually cleaned steel, particularly of interest in “safety” areas where “blast cleaning” is not allowed.
The surface tolerant epoxy primer applies to structural steelwork by brushing or spraying, with airless spray preferred for large areas such as storage tanks.
Epoxy/Polyamide binder with anti corrosive and inorganic pigments and thinned with Aromatic Hydrocarbon and Alcohol solvents.
Quick Links - Click To Jump To Section:
Features & Benefits
- Surface tolerant epoxy primer
- Two-pack
- High performance
- For manually cleaned steel
- Use in areas where blast cleaning is not permitted
- Brush or spray application
- Airless spray preferred for large areas
Product Information
Data | |
---|---|
Volume solids | Approx 48% |
Typical thickness | 96 microns dft from 200 microns wet |
Theoretical coverage | 5 square metres per litre |
Practical coverage | Reduce above by up to 20% |
VOC content | EU limit value for this product (cat A/j): 500 g/l. This product contains max 500 g/l VOC |
Mix ratio | 3:1 by volume Base:Activator |
Cleaner | Tor TH98 |
Pot Life | 8 hours at 20℃ |
Flash point | 33℃ |
Shelf life | 2 years in unopened containers |
Drying Times
Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
---|---|---|---|---|
Minimum | Maximum | |||
20℃ | 2 hours | 8 hours | 8 hours | 28 days |
Surface Preparation
A generally acceptable standard of cleanliness for steel is Swedish Standard ST2 for manual cleaning.
Avoid excessive burnishing.
Wash down and remove all loose contamination.
Ensure all loose rust is removed before painting.
Remove all loose dirt before painting.
Limitations
Below 8℃ cure times will be significantly extended. At very low temperatures, cure may be curtailed.
Product will only tolerate a dampness of surface – not running water.
Data sheet
- Manufacturer
- Tor
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Spray, brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4L
- Base Type
- Epoxy
- Solvent
- Mixture
- Mixing Ratio
- 3:1 by volume Base:Activator
- Touch Dry (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- 8 hours
- Fully Cured (at 20°C)
- 8 hours
- Pot Life (at 20°C)
- 8 hours
- Coverage
- 5 square metres per litre
- Recommended Thinner/Cleaner
- (Cleaner) Tor Epoxy Thinners ( TH98)
- Unit Contents
- Base, Activator
- Solids by Volume
- Approx 48%
- VOC
- EU limit value for this product (cat A/j): 500 g/l. This product contains max 500 g/l VOC
- Shelf Life (from date of manufacture)
- 2 years in unopened containers
- UN Number
- UN1263
- Layer Thickness
- 96 microns dft from 200 microns wet
- Base Type
- Epoxy
- Base Type
- Solvent
- Suitable For Use On
- Steel
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Surface Tolerant
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Product Range
- Tor Roofing & Cladding
- Colour Family
- Grey
- Dry to Recoat (@ 20-25°C)
- 8 hours
Questions
Question about the product
Dilution-thinner on 2021-11-09 07:09:29 | Question:
Is it possible to dilute this product with thinner? |
Answer from Rawlins’ Technical Team:
No, this product is not designed to be thinned. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Epoxy Surface Tolerant Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor Epoxy Thinners
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Tor Epoxy Thinners - also known as Tor Tortread EP Thinners - for the thinning (where necessary) of Tor Two Pack epoxy based materials and for...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...