Follow us on:

HMG SQ26 Crackle Coat Thinner 2738 | Thinners & Solvents

HMG SQ26 Crackle Coat Thinner 2738

TNR2738
HMG4639

HMG SQ26 Crackle Coat Thinner 2738G is thinner designed specifically for use with the HMG SQ26 Crackle Coat system.

This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:

3-Pack System Details
Base (Part 1) HMG SQ26 Crackle Base Coat
Top Coat (Part 2) HMG SQ26 Crackle Top Coat
Thinner (Part 3) HMG SQ26 Crackle Coat Thinner 2738

  • Part three of a three part system.
Size
£48.01(incl. VAT)
£40.01(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

HMG SQ26 Crackle Coat Thinner 2738G is a peroxide hardener.

Please note this product is one part of a three-pack system which MUST be purchased/used together with HMG SQ26 Crackle Base Coat and HMG SQ26 Crackle Top Coat.



Click To Jump To Section:




Features & Benefits


  • Part three of a tree-pack system.



Product Specification


Technical Data
HMG SQ26 Crackle Coat Thinner 2738G
Volume Solids: n/a
VOC Content: 0.890kgs/ltr
SG: -
Viscosity: Not determined
Density: 0.89 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Pot Life: -
Flash Point: -4°C



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness
Application n/a n/a



Coverage: n/a (Theoretical)

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
  • These values are a guide only and are not to be used as specifications.
  • Film thickness will vary depending on actual use and specification.
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



Drying Times


Drying Times At 20°C
Touch Dry: n/a



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Application Methods


Technical Data
Compliant Spray Gun
Mixing Ratio: Mixing instructions appear on base component.
Thinner Options: n/a
Viscosity: n/a
Spray Gun Setup: n/a
Number Of Coats (Guide Only): n/a
Flash Off: n/a



For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



Product Notes


Information On Basic Physical And Chemical Properties
HMG SQ26 Crackle Coat Thinner 2738G
Form: According to product specification
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value 20°C: Not determined
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 77°C
Flash Point: -4°C
Flammability (solid, gas): Not applicable
Ignition temperature: 370°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 2.1 Vol %
Explosion limits: Upper: 11.5 Vol %
Vapour pressure at 20°C: 100 hPa
Density at 20°C: 0.89 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: Not miscible
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: Not determined
Viscosity: Kinematic: Not determined.
Solvent content: Organic solvents: 44.7%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.

Click to go back to the top of the page

Product Details
4639-747871

Data sheet

Manufacturer
HMG Paints Limited
Single, Two or Three Pack
Single
Mixing Ratio
Mixing instructions appear on base component.
Density
0.89 g/cm³
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
UN Number
UN1263
Application Method
Spray
Product Usage Type
Thinner
Categorised As
Accessories > Thinners
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG SQ26 Crackle Coat Thinner 2738 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
HMG SQ26 Crackle Top Coat | Available in 400+ colours

HMG SQ26 Crackle Top Coat

HMG SQ26 Crackle Top Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 3-Pack System Details Base (Part 1) HMG SQ26 Crackle...

Price £87.71 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG SQ26 Crackle Base Coat

HMG SQ26 Crackle Base Coat

HMG SQ26 Crackle Base Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 3-Pack System Details Base (Part 1) HMG SQ26...

Price £58.66 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery