- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temadur HS 90, a two-component, high-solids glossy polyurethane paint, hardener aliphatic isocyanate recommended to be used as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress.
- Huge colour range from RAL, BS & NCS
- Forms a smooth and silky surface with outstanding gloss
- Retains its gloss far more longer than conventional polyurethane paints
- Can be applied without the “wet-on-wet” technique, even by airless spray
- Durable, easy-to-clean and non-chalking
- Lower VOC content
- Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain
- Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment
Product customisation
Don't forget to save your customization to be able to add to cartTikkurila Temadur HS 90 forms a smooth and silky surface with an outstanding gloss appearance close to car finishes, recommended to be used as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress.
Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment.
Huge colour range from RAL, BS & NCS
A two-component, high-solids glossy polyurethane paint, hardener aliphatic isocyanate.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Recommended Film Thickness & Theoretical Coverage
- Drying Times
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Mixing Components
- Application
- Thinners
- Cleaning of Equipment
Features & Benefits
- Huge colour range from RAL, BS & NCS
- Appearance of the painted surface close to car finishes
- Forms a smooth and silky surface with outstanding gloss
- The paint retains its gloss far more longer than conventional polyurethane paints
- Can be applied without the “wet-on-wet” technique, even by airless spray
- This enables faster throughput time and, therefore, more efficient production
- A durable, easy-to-clean and non-chalking with good gloss and colour retention
- Recommended to be used as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress
- Lower VOC content compared to conventional polyurethane finishes
- The product has been tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain
- Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment
Technical Data
Volume Solids:
- 64±2% (ISO 3233)
Weight Solids:
- 75±2%
Specific Gravity:
- 1.3±0.1 kg / l (mixed)
Mixing Ratio:
- Base: 4 parts by volume (Temadur HS 90)
- Hardener: 1 part by volume (008 7640)
Pot Life (23℃):
- 1½ hours
VOC:
- The Volatile Organic Compounds amount (ISO 11890) is 320 g/litre of paint mixture.
- VOC content of the paint mixture (thinned 20% by volume) is 430 g/l.
Recommended Film Thickness & Theoretical Coverage
Recommended film thicknesses | Theoretical coverage | |
---|---|---|
Wet | Dry | |
70µm | 40µm | 16.0 m²/l |
100µm | 60µm | 10.7 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
DFT 40µm | 5℃ | 10℃ | 23℃ | 35℃ |
---|---|---|---|---|
Dust dry, after | 4h | 2h | 1h 20min | 30min |
Touch dry, after | 20h | 10h | 2h 30min | 2h |
Recoatable without abrading, after | No limitations |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Primed surfaces:
- Oil, grease, salt and dirt are removed from the surface by appropriate means.
- Repair any damage to the primer coat.
- Note the overcoating time of primer. (ISO 12944-4)
Recommended Primers
- Temacoat GF Primer
- Temacoat GPL-S Primer
- Temacoat GPL-S MIO
- Temacoat RM 40
- Temacoat Primer
- Temadur 20
Recommended Topcoats
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +5ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Mixing Components
- First stir base and hardener separately.
- The correct proportions of base and hardener must be mixed thoroughly before use.
- Use power mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5–10 minutes and then apply the full coat
For airless spraying
- The product is thinned depending on the temperature of the components (base, hardener, thinner) approximately 15–20% to the viscosity 23–28s (DIN4).
- Recommended nozzle tip is 0.009"–0.011" and pressure 140–180 bar.
- Spray angle shall be chosen according to the shape of the object.
For conventional spraying
- The product is thinned approximately 15–20% to the viscosity 23–28s (DIN4)
- Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar
For brush application
- The product should be thinned according to the circumstances.
Thinners
At conventional spray also Thinner 1061
Cleaning of Equipment
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior & Exterior
- Single, Two or Three Pack
- Two-Pack
- Parts
- 2
- Base Type
- Polyurethane
- Interior/Exterior Use
- Both
- Solvent
- Mixture - see safety data sheet
- Mixing Ratio
- 4:1
- Suitable Substrates
- Steel
- Key Features
- Tested for non-contamination of grain cargo
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 2.5 hours
- Coverage
- 10.7 to 16.0 m²/l
- Recommended Thinner/Cleaner
- Thinner 1048
- Unit Contents
- Base & hardener
- Compatible Primers
- Temacoat GF Primer; for more, see product data sheet
- Compatible Topcoats
- Temadur Clear, Temadur HS 90
- Solids by Volume
- 64±2% (ISO 3233)
- VOC
- 320 g/litre; (thinned 20% by volume) is 430 g/l
- Recommended Dry Film Thickness
- 40 to 60µm
- Recommended Wet Film Thickness
- 70 to 100µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Dry to Recoat (at 23°C)
- No limitations
- Touch Dry (at 23°C)
- 2h 30min
- Pot Life
- 1½ hours (23℃)
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- High Solids
- Usages
- Chemical Resistance
- Usages
- Abrasion Resistant
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Weather Resistance
- Usages
- Easy to Clean
- Usages
- Non-Chalking
- Product Usage Type
- Topcoat
- Product Range
- Temadur
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Product Type
- Acrylic Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2.5 hours
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
- Product Attributes
- Easy to Clean
- Product Attributes
- Tough / Durable
- Product Attributes
- Non-Chalking
- Resistance to
- Abrasion
- Resistance to
- Chemicals
- Resistance to
- Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temadur HS 90 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Temacoat GF Primer
Tikkurila Temacoat GF Primer is a two component, polyamide cured epoxy primer containing zinc phosphate that is used as a primer for steel, zinc and aluminium surfaces. For industrial and professional use only For use in epoxy and polyurethane systems For use where high requirements for appearance are set Recommended for agricultural...
Tikkurila Temacoat GPL-S MIO
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environments Fast cure and low-temperature cure hardeners available - click to...
Tikkurila Temacoat GPL-S Primer
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate. Excellent adhesion to steel, zinc and aluminium surfaces. Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress. Can be overcoated after a prolonged period of time. Faster...
Tikkurila Temacoat Primer
A two-component resin modified epoxy paint containing anti-corrosive pigments that can be applied at sub-zero temperatures as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress. Recommended for building frameworks, tubular bridges, conveyors and other steelwork and equipment Adheres well to...
Tikkurila Temacoat RM 40
2-component, resin modified epoxy primer/topcoat with 4,000+ colours that can be used as a single-coat system. Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress. Suitable for concrete surfaces and has a CE marking. Can be used on steel structures in wet environments, e.g. inside pontoons,...
Tikkurila Temadur 20
2-pack semi-matt polyurethane paint with 3,800+ colours that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC. Resistance to weathering and abrasion MED...
Tikkurila Temadur Clear
Tikkurila Temadur Clear provides extra protection and colour and gloss improvement, used for topcoating polyurethane paint systems making the paint film durable, non-chalking and easy to clean. Two-component, glossy polyurethane varnish, hardener aliphatic isocyanate MED (Marine Equipment Directive) certificate no EUFI29-19002225- MED and...
Tikkurila Temadur HS 90
Tikkurila Temadur HS 90, a two-component, high-solids glossy polyurethane paint, hardener aliphatic isocyanate recommended to be used as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress. Huge colour range from RAL, BS & NCS Forms a smooth and silky surface with outstanding gloss Retains its gloss far...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...