Follow us on:

Tikkurila Temafloor 200 Primer | Epoxy Floor Paint

Tikkurila Temafloor 200 Primer

Tikk4718
TIK4718

2-component solvent-free epoxy varnish. It gives good adhesion for Temafloor coatings and screeds and dries fast. Short overcoating time enables whole system application in one day.

  • Thinned Temafloor 200 Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion for coatings and screeds
  • Mixed with sand also suitable for patching of concrete floors
  • Suitable for priming of new and old concrete floors prior to laying Temafloor coatings and screeds
Colour
Size
Finish
£528.49(incl. VAT)
£440.41(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Tikkurila Temafloor 200 Primer is a two-component solvent-free epoxy varnish. It gives good adhesion for Temafloor coatings and screeds and dries fast. Short overcoating time enables whole system application in one day.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Thinned Temafloor 200 Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion for coatings and screeds
  • Mixed with sand also suitable for patching of concrete floors
  • Suitable for priming of new and old concrete floors prior to laying Temafloor coatings and screeds



Technical Data


  • Volume Solids: Approx. 100%
  • Specific Gravity: 1.1 kg / litre (mixture).
  • Pot Life (23℃): About 15 minutes after mixing, on substrate.

Practical Coverage:

Coverage on concrete floors is on average:

  • 1st primer coat - 4–8 m²/l
  • 2nd primer coat - 6–10 m²/l

Practical coverage depends on the porosity and evenness of the substrate and on the application method.

Mixing Ratio:

  • Base - 2 parts by volume Temafloor 200 Primer
  • Hardener - 1 part by volume 008 4406

Drying Time (23℃)

  • Dust dry after 3 hours
  • Touch dry after 5 hours
  • Recoatable after 6 - 12 hours
  • Light trucking</strong after 16 hours>
  • Fully cured after 7 days

The drying times are for Temafloor 200 Primer thinned 30% with Thinner 006 1029.



Surface Preparation


New Concrete

  • Remove laitance by power grinding or hydrochloric acid etching.
  • Choose the method best suited for the premises.
  • After grinding remove dust carefully with a vacuum cleaner.
  • Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water).
  • Rinse with plenty of water.
  • Dry the surface.

Old Concrete

  • Remove all grease, oil, chemicals and other impurities by Maalipesu detergent.
  • Remove old peeling paint layer by grinding.
  • Choose the method best suited for the premises.
  • Clean out pot-holes removing all loose friable material.
  • Open cracks with e.g. an abrasive tool.
  • Remove loose material and dust.

If cementitious screed is used, check compatibility with the levelling screed manufacturer.



Application Conditions


  • The relative humidity of the concrete should not exceed 97%.
  • The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying.
  • Relative humidity of air should not exceed 80%.

Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on colour appearance.



Mixing Components


  • First stir base and hardener separately.
  • Mix the correct proportions of base and hardener thoroughly (approx. 2 minutes to get homogenous mixture) by using a low speed industrial hand drill with a paddle.
  • Use power mixer for mixing.
  • Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface, weaken the properties of the coating and risk the success of the application.



Application


Priming:

  • Prime using 30–50% thinned Temafloor 200 Primer epoxy varnish.
  • Pour the varnish mixture onto the floor and apply as much as is needed to impregnate the concrete surface.
  • If necessary, repeat priming to get a non-porous surface. A porous priming coat will result in holes and air bubbles in the finished coating.
  • Subsequent treatment can becarried out after 2 hours using "wet-on-wet" technique.

Patching:

  • Patch pot-holes and cracks with a mixture of unthinned Temafloor 200 Primer epoxy varnish and dry, clean sand.
  • Mixing ratio e.g. 1 part by volume of varnish mixture and 1 – 2 parts by volume of sand of grain size 0.1–0.6 mm.
  • Sand the patched areas before overcoating, if necessary.
  • Note! Concrete surface should always be primed before patching.

Topcoating:

  • Overcoating should be done within 6–12 hrs after priming.
  • If the primed surface is not overcoated within 24 hrs, it should be abraded.
  • Pour the mixture onto the floor and applyit with a trowel and level with a roller.
  • Note! Add the remaining mixture to the next batch of the product, do not scrape it out of the container onto the floor.



Thinner/Cleaning


Thinner

Thinner 1029, Thinner 1031

Cleaning Of Equipment

Thinner 006 1029 (or Thinner 006 1031).



VOC


VOC 2004/42/EC (cat A/j) 500 g/l (2010)

Temafloor 200 Primer: max. VOC < 500 g/l



Health And Safety


Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.

For industrial and professional use only.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Click to go back to the top of the page

Product Details
4718-927994

Data sheet

For Use By
Professional Use
Application Method
Roller, trowel
Sheen
Gloss
Single, Two or Three Pack
Two-Pack
Pack Size
15L
Mixing Ratio
Base 2: parts by volume Temafloor 200 Primer - Hardener: 1 part by volume 008 4406
Application
Roller, steel or rubber trowel.
Coverage
1st primer coat: 4–8 m²/l - 2nd primer coat: 6–10 m²/l
Recommended Thinner/Cleaner
Thinner 1029, Thinner 1031
Density
1,15 g/cm³
Density
Hardener: 1 g/cm³
Solids by Volume
approx. 100%
Finish
Gloss
Size
15L
UN Number
UN3082
UN Number
Hardener: UN2735
Dry to Recoat (at 23°C)
6 - 12 hours
Touch Dry (at 23°C)
5 hours
Fully Cured (at 23°C)
7 days
Pot Life
About 15 minutes after mixing, on substrate.
Base Type
Solvent-Free
Suitable For Use On
Concrete Floors
Finish
Gloss
Application Method
Roller
Application Method
Trowel
Components
2K
Product Usage Type
Binder
Product Usage Type
Primer
Product Range
Temafloor
Colour Family
Clear
Product Type
Epoxy
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Tikkurila Temafloor 200 Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
Tikkurila Thinner 1029 | Solvents & Thinners

Tikkurila Thinner 1029

Tikkurila Thinner 1029 is a thinner for ethyl zinc silicate paints and solvent-free epoxy paints.

Price £88.24 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Thinner 1031 | Thinners

Tikkurila Thinner 1031

Tikkurila Thinner 1031 is a thinner for epoxy paints, silicone paints, polyvinylbutyral paints, 2-component zinc rich paints and epoxy shop primers.

Price £26.23 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery