- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temalac ML 90 is a fast-drying, one-component alkyd topcoat. Its usage areas are small tanks, agricultural machinery, haulage equipment and other machinery and equipment.
- Used when there is a high demand for colour and gloss retention.
- Gives the surface a high-quality appearance. It is the perfect choice when an easy-to-apply product with an esthetic appearance is required.
- Good gloss and colour retention when exposed to weathering.
- Can be applied using a "wet-on-wet" painting technique.
- Suitable for industrial finishing.
Product customisation
Don't forget to save your customization to be able to add to cartTikkurila Temalac ML 90 is a fast-drying, one-component alkyd topcoat.
Temalac ML 90 is used when there is a high demand for colour and gloss retention. Its usage areas are small tanks, agricultural machinery, haulage equipment and other machinery and equipment.
Temalac ML 90 gives the surface a high-quality appearance. It is the perfect choice when an easy-to-apply product with an esthetic appearance is required.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Topcoats
- Application Conditions
- Application
- VOC
- Health And Safety
Features & Benefits
- Used when there is a high demand for colour and gloss retention.
- Gives the surface a high-quality appearance. It is the perfect choice when an easy-to-apply product with an esthetic appearance is required.
- Good gloss and colour retention when exposed to weathering.
- Can be applied using a "wet-on-wet" painting technique. • Suitable for industrial finishing.
- Recommended uses: small tanks, agricultural machinery, haulage equipment and other machinery and equipment.
Technical Data
Technical Data | ||||||
---|---|---|---|---|---|---|
Tikkurila Temalac ML 90 | ||||||
Volume Solids: | 45±2% | |||||
SG: | 0.9–1.1 kg / l depending on colour. | |||||
Viscosity: | Kinematic (40°C): >20,5 mm² /s >60 s [ISO 6mm cup] | |||||
Density: | 1.2 g/cm³ | |||||
Storage Conditions: | Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials. Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Recommended storage temperature is +5°C ...+25°C | |||||
Flash Point: | - |
Drying Times | |||
---|---|---|---|
DFT 40µm | 10°C | 23°C | 35°C |
Dust Dry: | 2 hours | 1 hours] | 30 minutes |
Touch Dry: | 8 hours | 5 hours | 3 hours |
Recoatable: | 36 hours | 24 hours | 16 hours |
Recoatable (wet on wet): | - | ½ – 1h | |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
Recommended Film Thickess | ||
---|---|---|
Wet | Dry | Theoretical Coverage |
90µm | 40µm | 11.1 m²/l |
135µm | 60µm | 7.5 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
Surface Preparation
- Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- Stir the product carefully before use.
- For airless spraying, the product is thinned approximately 5–15%. Recommended nozzle tip is 0.011"–0.015" and pressure 120–180 bar. Spray angle shall be chosen according to the shape of the object.
- For brush application product should be thinned according to the circumstances.
- The best finish is obtained using a "wet-on-wet" technique, with 5–30 minutes evaporating intervals.
Recommended Primers:
Recommended Topcoats:
Thinner/Cleaning
Thinner:
- At spray application Thinner 1006.
VOC
- The Volatile Organic Compounds amount is 460 g/litre of paint.
- VOC content of the paint (thinned 10% by volume) is 500 g/l.
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Data sheet
- Manufacturer
- Tikkurila
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Airless Spray, Brush
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed, Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 3L, 10L, 20L
- Base Type
- Alkyd
- Touch Dry (at 20°C)
- 5 hours
- Coverage
- 11.1 m²/l - 7.5 m²/l
- Recommended Thinner/Cleaner
- At spray application Thinner 1006. At brush application Thinner 1050.
- Compatible Primers
- Temaprime EE, Temaprime EUR, Temaprime GF
- Min. Application Temperature
- 10ºC
- Density
- 1.2 g/cm³
- Solids by Volume
- 45±2%
- VOC
- 460 g/litre
- Touch Dry
- 35°C - 3 hours
- Finish
- Gloss
- Size
- 3L, 10L, 20L
- Recommended Dry Film Thickness
- 40µm - 60µm
- Recommended Wet Film Thickness
- 90µm - 135µm
- UN Number
- UN1263
- Dry to Recoat (at 10°C)
- 36 hours
- Touch Dry (at 10°C)
- 8 hours
- Dry to Recoat (at 23°C)
- 24 hours
- Touch Dry (at 23°C)
- 5 hours
- Dry to Recoat
- 35°C - 16 hours
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Product Usage Type
- Topcoat
- Product Range
- Temalac
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 5 hours
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temalac ML 90 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Temalac ML 90
Tikkurila Temalac ML 90 is a fast-drying, one-component alkyd topcoat. Its usage areas are small tanks, agricultural machinery, haulage equipment and other machinery and equipment. Used when there is a high demand for colour and gloss retention. Gives the surface a high-quality appearance. It is the perfect choice when an easy-to-apply...
Tikkurila Temaprime EE
Tikkurila Temaprime EE is a fast drying, one-component anti-corrosive special primer. Its recommended uses include both new and maintenance painting of containers, agricultural machinery and other steel structures. Huge colour range available. Adheres extremely well to different kinds of substrates, such as steel, aluminium and zinc....
Tikkurila Temaprime EUR
Tikkurila Temaprime EUR is a fast-drying, one-component anti-corrosive economical alkyd primer. Recommended for steel structures, agricultural, construction and other machinery. Huge colour range available. An excellent choice for use in assembling plants and painting stations with rapid production cycles. The product has MED (Marine...
Tikkurila Temaprime GF
Tikkurila Temaprime GF is a fast-drying one-component anti-corrosive pigmented special primer. Recommended uses include haulage equipment, agricultural, construction and other machinery. Huge colour range available Primer for steel, aluminium and zinc surfaces Recoatable also with polyurethane paints Excellent anti-corrosive properties...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...