- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temaline TL is a two-component, solvent free epoxy coating.
- Very high sag resistance, which enables achieving a thick paint film with one application.
- The product is an excellent choice for tanks and reservoirs storing many kinds of fuels like gasoline, diesel, kerosene and lead-free gasoline.
- Intended for use as a heavy-duty coating on steel surfaces exposed to abrasion and chemical and mechanical stress, such as immersion in oil storage tanks, cisterns and basins in the forest industry, chemical industry.
- Due to its CE marking, Temaline TL is also suitable for protecting concrete basins and other concrete surfaces.
- Good resistance to dilute solutions of non-oxidizing acids, alkali and salts in immersion.
Tikkurila Temaline TL is a two-component, solvent free epoxy coating. Intended for use as a heavy-duty coating on steel surfaces exposed to abrasion and chemical and mechanical stress, such as immersion in oil storage tanks, cisterns and basins in the forest industry, chemical industry.
Temaline TL has very high sag resistance, which enables achieving a thick paint film with one application.
Temaline TL is an excellent choice for tanks and reservoirs storing many kinds of fuels like gasoline, diesel, kerosene and lead-free gasoline.
Due to its CE marking, Temaline TL is also suitable for protecting concrete basins and other concrete surfaces.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Mixing Components
- Application
- Thinners
- Cleaning Of Equipment
- VOC
- Health And Safety
Features & Benefits
- Two-component solvent free epoxy.
- Very high sag resistance, which enables achieving a thick paint film with one application. The product is an excellent choice for tanks and reservoirs storing many kinds of fuels like gasoline, diesel, kerosene and lead-free gasoline.
- Intended for use as a heavy-duty coating on steel surfaces exposed to abrasion and chemical and mechanical stress, such as immersion in oil storage tanks, cisterns and basins in the forest industry, chemical industry.
- Due to its CE marking, Temaline TL is also suitable for protecting concrete basins and other concrete surfaces.
- Good resistance to dilute solutions of non-oxidizing acids, alkali and salts in immersion.
- Resistance to chemicals is specified separately for each particular case.
- Recommended for oil storage tanks, cisterns and basins in the forest industry, chemical industry and sewage purification plants etc.
Technical Data
Volume Solids: Approx. 100% (ISO 3233).
Weight Solids: Approx. 100%.
Specific Gravity: 1.3 kg/l (mixed).
Mixing Ratio:
- Base - 2 parts by volume - Temaline TL.
- Hardener - 1 part by volume - 008 7067.
Pot Life (23°C): 30 minutes.
Recommended Film Thicknesses and Theoretical Coverage:
Recommended film thicknesses | Theoretical coverage | |
---|---|---|
Wet | Dry | |
250µm | 250µm | 4.0 m²/l |
500µm | 500µm | 2.0 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Time:
DFT 250µm | 10°C | 23°C | 35°C |
---|---|---|---|
Dust dry, after | 8 hours | 6 hours | 2 hours |
Touch dry, after | 30 hours | 16 hours | 8 hours |
Recoatable without sanding, after | 8–48 hours | 6–24 hours | 2–10 hours |
Fully cured, after | 14 days | 7 days | 3 days |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Gloss: Full gloss.
Colour Shades: Grey. The colour is liable to change when exposed to light or chemicals.
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4).
- Blast clean to grade Sa2½. (ISO 8501-1) The surface profile must be minimum medium (G). (ISO 8503-2).
- The surface must be dry and at least 4 weeks old.
- The relative humidity of the concrete should not exceed 97%.
- Remove any splashes and unevennesses by grinding.
- Remove laitance and form oil from concrete castings by sanding or blast cleaning.
- Any cracks, crevices and voids must be repaired with a mixture of Temaline TL and fine dry quartz sand.
Recommended Primers
- Temaline TL
Steel surfaces:
- Temaline TL
Concrete surfaces:
- Impregnation with 30% thinned Temaline TL.
Recommended Topcoats
- Temaline TL
Steel surfaces:
- 1 x Temaline TL
Concrete surfaces:
- 2 x Temaline TL
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Mixing Components
- First stir base and hardener separately.
- The correct proportions of base and hardener must be mixed thoroughly before use.
- Use power mixer for mixing.
- Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
- Application with a dual feed hot airless spray equipment with a pressure ratio of at least 45:1 and a theoretical litre capacity of at least 8 l/min.
- Optimum spray temperature is around 50ºC at the nozzle, starting temperature about 40ºC.
- Airless spray nozzle tip 0.018"–0.027" and nozzle pressure 180–200 bar.
- Spray angle shall be chosen according to the shape of the object.
- Use of a reverse nozzle is recommended.
- Sharp edges, corners, weld seams and other areas difficult to paint should be painted by brush prior to spray application.
Thinners
- Thinner 006 1031 or acetone.
Cleaning Of Equipment
- Thinner 006 1031 or acetone.
VOC
- Does not contain Volatile Organic Compounds. VOC content of the paint mixture (thinned 10% by volume) is 80 g/l.
Health And Safety
Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
- Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior Use
- For Use On
- Steel, Concrete
- Application Method
- Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Two-Pack
- Parts
- Two
- Parts
- 15L
- Base Type
- Solvent free epoxy
- Interior/Exterior Use
- Interior
- Mixing Ratio
- 2 : 1
- Suitable Substrates
- Steel, concrete
- Key Features
- Chemical resistance, solvent free
- Application
- Spray
- Coverage
- 2.0 - 4.0 m²/l
- Recommended Thinner/Cleaner
- Thinner 1031, Thinner 006 1031, acetone.
- Compatible Primers
- Temaline TL
- Compatible Topcoats
- Temaline TL
- Min. Application Temperature
- 10ºC
- Solids by Volume
- 100%
- VOC
- 80 g/l
- Finish
- Full gloss
- Recommended Dry Film Thickness
- 250µm - 500µm
- Recommended Wet Film Thickness
- 250µm - 500µm
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Dry to Recoat (at 23°C)
- 6-24hrs
- Touch Dry (at 23°C)
- 16hrs
- Fully Cured (at 23°C)
- 7 days
- Pot Life
- 30 mins at 23°C
- Base Type
- Solvent-Free
- Base Type
- Epoxy
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Finish
- Gloss
- Finish
- Full Gloss
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Temaline
- Colour Family
- Grey
- For Tanks or Pipes
- Tank
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temaline TL is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT